Mad-Al Posted October 23, 2020 Share Posted October 23, 2020 So following advice on here I just pulled the trigger (get it) on a new a quite expensive optic and would like to protect it in the field. I've seen online that the preferences seem to be a kill flash (what im leaning towards) or a couple of pieces of polycarbonate or similar, now im not massively hand and dont own any tools so for the price of me getting set up for the lexican builds I could just get a Tenebraex kill flash so how tough are these kill flashes? and what do all of you use to protect your optics? Cheers Link to comment Share on other sites More sharing options...
Shamal Posted October 23, 2020 Share Posted October 23, 2020 12 minutes ago, Mad-Al said: So following advice on here I just pulled the trigger (get it) on a new a quite expensive optic and would like to protect it in the field. I've seen online that the preferences seem to be a kill flash (what im leaning towards) or a couple of pieces of polycarbonate or similar, now im not massively hand and dont own any tools so for the price of me getting set up for the lexican builds I could just get a Tenebraex kill flash so how tough are these kill flashes? and what do all of you use to protect your optics? Cheers I use a cheapo flip up perspex screen in front of my reflex sight. Thought I had better after some dead eyed dick shot out two! Only about 8 pounds on internet. Comes with two shields, one clear and one amber. I have made extras out of aluminium,great protection but does nothing for target acquisition! Lol 🤭 Regards Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted October 23, 2020 Supporters Share Posted October 23, 2020 The flip-ups work but I lost the clear lens off of mine - it just snapped right off. The small screws holding it on aren't that good a solution. Also, they might not come up high enough to cover a 40mm+ scope on mounts, if that's what OP has.. A kill-flash is likely the easier solution although I'd prefer to get as much light through as possible, especially as we head into winter. I get that you're not handy, but the best way to address that is to have a go. If you've got a telescopic sight then the front end cap should unscrew off. A sheet of 2mm polycarb from eBay, a hacksaw, a file and some time will get you a lens that you can just pop inside the endcap, then screw it back on. Even thin perspex from something like a clear CD/DVD case (I know, showing my age) will likely sacrifice itself to protect the glass lens. Link to comment Share on other sites More sharing options...
Shamal Posted October 23, 2020 Share Posted October 23, 2020 13 minutes ago, Rogerborg said: Even thin perspex from something like a clear CD/DVD case (I know, showing my age) Haha. Wots at en gramps? We has music injected straight through us buds now lol I can talk I'm still usin' c9o tapes. Dolby chrome. Amazing sound! Lol Regards Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted October 23, 2020 Supporters Share Posted October 23, 2020 Just now, Shamal said: I can talk I'm still usin' c9o tapes. Dolby chrome. Amazing sound! Lol If you know, you know. Link to comment Share on other sites More sharing options...
leadly Posted October 23, 2020 Share Posted October 23, 2020 I use a honeycomb shade on my Hawke scope. I tried to get a cheap one from eBay but the size was a bit off. So ended up getting an official Hawke one for about £25. Pricey, but my scope cost about £80 in the first place. Hasn't really altered the view at all, maybe just a tad darker due to less light getting in but still usable in the woods! Link to comment Share on other sites More sharing options...
Mad-Al Posted October 23, 2020 Author Share Posted October 23, 2020 30 minutes ago, Rogerborg said: I get that you're not handy, but the best way to address that is to have a go. If you've got a telescopic sight then the front end cap should unscrew off. A sheet of 2mm polycarb from eBay, a hacksaw, a file and some time will get you a lens that you can just pop inside the endcap, then screw it back on. Even thin perspex from something like a clear CD/DVD case (I know, showing my age) will likely sacrifice itself to protect the glass lens. Okay I'll grab some amd give it a go then? Is this stuff reasonably easy to work with? 6 minutes ago, leadly said: I use a honeycomb shade on my Hawke scope. I tried to get a cheap one from eBay but the size was a bit off. So ended up getting an official Hawke one for about £25. Pricey, but my scope cost about £80 in the first place. Unfortunately the only kill flash i can get for my optic is pushing 90 quid but that's worth paying to protect my scope if thats the way i end up going Link to comment Share on other sites More sharing options...
Shamal Posted October 23, 2020 Share Posted October 23, 2020 17 minutes ago, Rogerborg said: If you know, you know. Haha I do know! Maxwell chrome.sigh😢 Was it re record not fade away? Regards Link to comment Share on other sites More sharing options...
MiK Posted October 23, 2020 Share Posted October 23, 2020 @Mad-Al I personally used 3mm disc’s I get from Amazon - depending on the size they are around a quid each (free delivery too) https://amzn.to/3oltFEg Just remember to measure the outer of the scope - even my scope is a 50mm I used a 60mm disc on the outer and just use some black electrical tape to secure it - have used this system on my cqb rifle and the Red-dot is still perfect even after getting up close quite often. /when I get home and into the cave I’ll grab a photo Link to comment Share on other sites More sharing options...
Shamal Posted October 23, 2020 Share Posted October 23, 2020 1 hour ago, Rogerborg said: If you know, you know. Scotch not Maxwell lol Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted October 23, 2020 Supporters Share Posted October 23, 2020 55 minutes ago, Shamal said: Scotch not Maxwell lol To this day, my dad still records things off of Sky onto VCR and takes them over to his fancy woman. Rituals are important. Link to comment Share on other sites More sharing options...
Tommikka Posted October 23, 2020 Share Posted October 23, 2020 1 hour ago, Shamal said: Scotch not Maxwell lol Maxell for audio, Scotch for video ... and Maxwell: Link to comment Share on other sites More sharing options...
Shamal Posted October 23, 2020 Share Posted October 23, 2020 1 hour ago, Rogerborg said: To this day, my dad still records things off of Sky onto VCR and takes them over to his fancy woman. Rituals are important. Wow. Good on your dad and the VCR! Lol 👍 I'm not saying anything about the fancy woman though 🤭 Regards Link to comment Share on other sites More sharing options...
MiK Posted October 23, 2020 Share Posted October 23, 2020 Personally I was a TDK man for audio......... I won’t mention the old 8-track the old stick had in his car Link to comment Share on other sites More sharing options...
Shamal Posted October 23, 2020 Share Posted October 23, 2020 1 hour ago, MiK said: Personally I was a TDK man for audio......... I won’t mention the old 8-track the old stick had in his car Coo fantastic bit of kit lol Link to comment Share on other sites More sharing options...
Kls77 Posted October 24, 2020 Share Posted October 24, 2020 go to pound shop , they have those little chip baskets , can cut the mesh to fit inside the scope rings , and enough mesh to do loads of scopes , cut to fit and little black spray paint and good to go, Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted October 24, 2020 Supporters Share Posted October 24, 2020 3 hours ago, Kls77 said: go to pound shop , they have those little chip baskets , can cut the mesh to fit inside the scope rings , and enough mesh to do loads of scopes , cut to fit and little black spray paint and good to go, Now that's a bodge I can get behind. 👍 Link to comment Share on other sites More sharing options...
sonofsammo Posted October 24, 2020 Share Posted October 24, 2020 On 23/10/2020 at 16:18, Mad-Al said: So following advice on here I just pulled the trigger (get it) on a new a quite expensive optic and would like to protect it in the field. I've seen online that the preferences seem to be a kill flash (what im leaning towards) or a couple of pieces of polycarbonate or similar, now im not massively hand and dont own any tools so for the price of me getting set up for the lexican builds I could just get a Tenebraex kill flash so how tough are these kill flashes? and what do all of you use to protect your optics? Cheers I run a Vortex diamondback, without protection. Tbh, if you just bought a Vortex (as I think you mentioned in your other thread?), don't bother... Isn't their awesome warranty half the point of getting one? Link to comment Share on other sites More sharing options...
CrackCommandoUnit1972 Posted October 28, 2020 Share Posted October 28, 2020 For all you Carlos Hathcocks out there Link to comment Share on other sites More sharing options...
alxndrhll Posted October 28, 2020 Share Posted October 28, 2020 I don't tend to bother largely because, like others have mentioned, I use a Vortex. If I was inclined to protect the lens in any way I'd go with a killflash of some description, because it kills two birds with one stone. Link to comment Share on other sites More sharing options...
Shamal Posted October 28, 2020 Share Posted October 28, 2020 31 minutes ago, CrackCommandoUnit1972 said: For all you Carlos Hathcocks out there Fuck!! I'm taking my scope off! Open sights from now on.🧐 Link to comment Share on other sites More sharing options...
Impulse Posted October 31, 2020 Share Posted October 31, 2020 I use a killflash because I like to conceal the scope shine. Scope protection for me is secondary as I've never had a scope break on me in 15 years of playing. I also use £50 scopes though, as I don't see a reason to shell out on pricey optics for my rifle. However, I have some maybe unpopular opinions on airsoft sniping; no airsoft gun is a precision instrument. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.