Roundel91 Posted January 7, 2017 Share Posted January 7, 2017 Wow. Just wow. Your work never ceases to amaze me. GearTech 1 Link to comment Share on other sites More sharing options...
GearTech Posted January 23, 2017 Author Share Posted January 23, 2017 DarkAssassin, Robin and Albiscuit 3 Link to comment Share on other sites More sharing options...
sniperslucky Posted January 29, 2017 Share Posted January 29, 2017 For those that might not have seen any of the work I've done below are a few of the commissions completed so far. For more you can ask to join my FB page:GearTechCustomPaint and check out the paint commission section on my web site(in its very early stages so forgive the layout www.geartechcustompaint. We will also have pics of our first hydro dipped items in the next couple of weeks, F2000 (2).JPGHalo (3).JPGIMG_9983.JPGMassEffectSl8 (2).JPGMP9 TITANFALL.jpgMp9 Worn Tan (4).JPGSpecna Boba fett (1).JPGStery Aug (25).JPGwasp2.jpgZombie P90 (2).JPG Hi, I'm going to get a spray gun kit, please can you let me know what paints you use i've looked around and they all sen to be small pots. Does using an air brush use lees paint than out of a can?. Thanks for any advice this is for personal use . Link to comment Share on other sites More sharing options...
GearTech Posted January 29, 2017 Author Share Posted January 29, 2017 Hi, I'm going to get a spray gun kit, please can you let me know what paints you use i've looked around and they all sen to be small pots. Does using an air brush use lees paint than out of a can?. Thanks for any advice this is for personal use . Small pots of enamels give you a better range of colours and are cheaper but they do take more time through an airbrush than a rattle can. You could visit your local body spray suppliers and ask if they can make up a litre of colour if its one you are going to use a lot of. Link to comment Share on other sites More sharing options...
sniperslucky Posted January 30, 2017 Share Posted January 30, 2017 Small pots of enamels give you a better range of colours and are cheaper but they do take more time through an airbrush than a rattle can. You could visit your local body spray suppliers and ask if they can make up a litre of colour if its one you are going to use a lot of. Thanks for the advice. Link to comment Share on other sites More sharing options...
GearTech Posted February 2, 2017 Author Share Posted February 2, 2017 DarkAssassin, Robin and Careless 3 Link to comment Share on other sites More sharing options...
DarkAssassin Posted February 2, 2017 Share Posted February 2, 2017 Holy hell you do an amazing job. Do you have any examples of a multicam black design or a design that would suit a multicam black loadout? I am dying to get my new Daytona'd M4 done and my TM AA12 not sure what colour to have the AA though. Link to comment Share on other sites More sharing options...
GearTech Posted February 2, 2017 Author Share Posted February 2, 2017 Holy hell you do an amazing job. Do you have any examples of a multicam black design or a design that would suit a multicam black loadout? I am dying to get my new Daytona'd M4 done and my TM AA12 not sure what colour to have the AA though. Cheers. I need to see if there is a Black Multicam Hydro dip film which would make life easier. Painting it on is so-so. The AA12 are awesome pieces to work on as the strip right down and are lovely big slabs of flat plastic. Link to comment Share on other sites More sharing options...
DarkAssassin Posted February 2, 2017 Share Posted February 2, 2017 Thanks dude. To be honest just have the colours match, a tiger stripe pattern would be good. Link to comment Share on other sites More sharing options...
sniperslucky Posted February 2, 2017 Share Posted February 2, 2017 Cheers. I need to see if there is a Black Multicam Hydro dip film which would make life easier. Painting it on is so-so. The AA12 are awesome pieces to work on as the strip right down and are lovely big slabs of flat plastic. Hi Again, I've looked at hydro dipping as well, but was worried about the paint work scratching. Is the hydro dipping hard wearing? Link to comment Share on other sites More sharing options...
GearTech Posted February 2, 2017 Author Share Posted February 2, 2017 Hi Again, I've looked at hydro dipping as well, but was worried about the paint work scratching. Is the hydro dipping hard wearing? If you use enough coats of clear laqure it should. Ideally it needs finishing in 2k laqure to give it a really tough finish. Link to comment Share on other sites More sharing options...
GearTech Posted February 2, 2017 Author Share Posted February 2, 2017 Thanks dude. To be honest just have the colours match, a tiger stripe pattern would be good. Tiger stripe in blacks and greys would look pretty cool. DarkAssassin 1 Link to comment Share on other sites More sharing options...
GearTech Posted February 2, 2017 Author Share Posted February 2, 2017 Robin and DarkAssassin 2 Link to comment Share on other sites More sharing options...
DarkAssassin Posted February 2, 2017 Share Posted February 2, 2017 Tiger stripe in blacks and greys would look pretty cool. Sold, how much would you think for an M4 with 6 mags a scope and an M320 launcher? Link to comment Share on other sites More sharing options...
GearTech Posted March 16, 2017 Author Share Posted March 16, 2017 Albiscuit, MasterGouken and ImTriggerHappy 3 Link to comment Share on other sites More sharing options...
GearTech Posted March 16, 2017 Author Share Posted March 16, 2017 Link to comment Share on other sites More sharing options...
Popular Post GearTech Posted March 16, 2017 Author Popular Post Share Posted March 16, 2017 FreeFrag.UK, Jedi_Master, ImTriggerHappy and 2 others 4 1 Link to comment Share on other sites More sharing options...
GearTech Posted March 16, 2017 Author Share Posted March 16, 2017 Link to comment Share on other sites More sharing options...
GearTech Posted March 16, 2017 Author Share Posted March 16, 2017 DarkAssassin and Albiscuit 2 Link to comment Share on other sites More sharing options...
GearTech Posted March 16, 2017 Author Share Posted March 16, 2017 Albiscuit 1 Link to comment Share on other sites More sharing options...
GearTech Posted March 16, 2017 Author Share Posted March 16, 2017 ASG M15 Commission Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted March 16, 2017 Mostly Retired Moderators Share Posted March 16, 2017 Hypermonkey is in for a treat with the Umbrella armoury there! Look bloody fantastic as always mate! GearTech 1 Link to comment Share on other sites More sharing options...
Hypermonkey Posted March 17, 2017 Share Posted March 17, 2017 I got them today Lewis. The quality is next level and the detail......well I'm running out of words as I keep seeing something new or notice the shading on the smallest of parts. There is shading and distress on the allen bolts!! If you are thinking of getting some of your kit done then do it, do it now!! GearTech 1 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted March 18, 2017 Mostly Retired Moderators Share Posted March 18, 2017 13 hours ago, Hypermonkey said: I got them today Lewis. The quality is next level and the detail......well I'm running out of words as I keep seeing something new or notice the shading on the smallest of parts. There is shading and distress on the allen bolts!! If you are thinking of getting some of your kit done then do it, do it now!! Yeah, I want to... it's just what to pick! As I said to you the other week outside The Mall, it's all such impressive work, that I want to buy new guns just to have them painted by Chris! The next time I'm at The Mall is the 27th April (Thursday night) and the 29th (Forum Mall game). If I see you there I'm making a beeline for your guns! GearTech 1 Link to comment Share on other sites More sharing options...
Andyraven Posted March 18, 2017 Share Posted March 18, 2017 that on a G&G Predator would look sick, tempted to go out and buy one for a paint job. GearTech 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now