Moderators Jez_Armstrong Posted October 25, 2024 Moderators Posted October 25, 2024 1 hour ago, Sd96 said: Do you have more pics of this ? With stock extended Not with it extended unfortunately I ended up buying the real one
Sd96 Posted October 25, 2024 Posted October 25, 2024 1 hour ago, Jez_Armstrong said: Not with it extended unfortunately I ended up buying the real one Did the 3d version work or just for show ?
Moderators Jez_Armstrong Posted October 25, 2024 Moderators Posted October 25, 2024 1 minute ago, Sd96 said: Did the 3d version work or just for show ? It worked after alot of work but it's much bigger than the proper one
Moderators Jez_Armstrong Posted December 4, 2024 Moderators Posted December 4, 2024 I wonder if anyone can help with an STL please I downloaded this and printed it overnight but apon checking this morning it's printed in two when it should be one. Is anyone able to merge to two together? https://www.thingiverse.com/thing:6666848
Speedbird_666 Posted December 4, 2024 Posted December 4, 2024 1 hour ago, Jez_Armstrong said: I wonder if anyone can help with an STL please Try the attached. dual_nvg_bridge(fixed).stl
Moderators Jez_Armstrong Posted December 4, 2024 Moderators Posted December 4, 2024 Wonderful thank you ?
mightyjebus Posted December 10, 2024 Posted December 10, 2024 currently working on a KS-1 using a CYMA as the base. Designed and printed off the cocking handle latches to match the KS-1 and made the handle ambi. prototyped the fake bolt release in FDM and the resin version is printing now. Enid_Puceflange, ButcherBill and PopRocket123 2 1
Moderators Jez_Armstrong Posted December 10, 2024 Moderators Posted December 10, 2024 2 hours ago, mightyjebus said: currently working on a KS-1 using a CYMA as the base. Designed and printed off the cocking handle latches to match the KS-1 and made the handle ambi. I can has ?
mightyjebus Posted December 10, 2024 Posted December 10, 2024 3 hours ago, Jez_Armstrong said: I can has ? The latch or the bolt release or both?
Moderators Jez_Armstrong Posted December 10, 2024 Moderators Posted December 10, 2024 35 minutes ago, mightyjebus said: The latch or the bolt release or both? The latch please!
mightyjebus Posted December 10, 2024 Posted December 10, 2024 8 minutes ago, Jez_Armstrong said: The latch please! PM me your email address and I'll send the file
MrTea Posted December 12, 2024 Posted December 12, 2024 Anyone able to test print some Kar98K shells for me from this STL? Bonus points if the person printing it can make sure it'll accept the o-rings as they're required for a useable FPS.
ParHunter Posted December 21, 2024 Posted December 21, 2024 On 10/12/2024 at 10:01, mightyjebus said: currently working on a KS-1 using a CYMA as the base. Designed and printed off the cocking handle latches to match the KS-1 and made the handle ambi. prototyped the fake bolt release in FDM and the resin version is printing now. I can only drool when I see the quality of these prints. Somehow my Ender3 can’t quite match that ?
mightyjebus Posted January 6 Posted January 6 I was asked to make a Saiga 12 SBS MLOK style handguard but longer than the original. After a bit of design and test printing, I made this. ButcherBill and BigStew 2
BigStew Posted January 6 Posted January 6 2 hours ago, mightyjebus said: I was asked to make a Saiga 12 SBS MLOK style handguard but longer than the original. After a bit of design and test printing, I made this. Any chance you'll be selling the file? ButcherBill 1
mightyjebus Posted January 7 Posted January 7 8 hours ago, BigStew said: Any chance you'll be selling the file? No but I could easily print you one for a fair price
BigStew Posted January 8 Posted January 8 On 07/01/2025 at 07:11, mightyjebus said: No but I could easily print you one for a fair price PM'D
woody_2231 Posted January 10 Posted January 10 (edited) Made four variants of the TM AKM GBB bolt shells, standard TM, MWS charging handle version, Galil, Type 3 AK47 (No lighting cut). The MWS CH bolt is used with the dust cover, and takes any MWS spec charging handles, CH does not reciprocate of course. The other bolt variants can be used on its own. Edited January 10 by woody_2231 mightyjebus, Enid_Puceflange, PopRocket123 and 1 other 3 1
ButcherBill Posted January 10 Posted January 10 3 hours ago, woody_2231 said: Made four variants of the TM AKM GBB bolt shells, standard TM, MWS charging handle version, Galil, Type 3 AK47 (No lighting cut). The MWS CH bolt is used with the dust cover, and takes any MWS spec charging handles, CH does not reciprocate of course. The other bolt variants can be used on its own. I'm always wary or 3D printed stuff (due to my ingorance of the media) but these are pretty cool.
Jaylordofwaargh Posted January 10 Posted January 10 Not me, but my brother isn't on here. He has started a G3/las gun project here is the start ButcherBill 1
woody_2231 Posted January 12 Posted January 12 On 10/01/2025 at 14:57, woody_2231 said: Made four variants of the TM AKM GBB bolt shells, standard TM, MWS charging handle version, Galil, Type 3 AK47 (No lighting cut). The MWS CH bolt is used with the dust cover, and takes any MWS spec charging handles, CH does not reciprocate of course. The other bolt variants can be used on its own. Files are up on cults3d if anyone is interested.
HuttArmouries Posted February 7 Posted February 7 Got a tm desert eagle and wanted to mount a red dot more modern than the traditional options. Made this little scope base to fit my knockoff aimpoint acro and cut the top off a cheap ammomax holster to fit it. Thinking of making a variant to fit aimpoint micro style sights and rmrs. Any other sorts people would like to see? The_Lord_Poncho, BigAl, Rogerborg and 1 other 4
scrumpy Posted March 18 Posted March 18 I needed a barrel shroud for my AAP-01 so the tracer unit didn't look so silly BL A1 to the rescue!
Austeyr Posted May 13 Posted May 13 I don't have access to a 3d printer, nor do I really want one but I'm curious if anybody could give me a quote to have this printed and assembled? https://cults3d.com/en/3d-model/various/airsoft-pkm-tactical-stock The description states: I recommend printing Pet-G filament or Glass-filled composite with 100% infill. I print with 0.4mm nozzle and 0.2mm layer. For assembly, you will need metal bolts and nuts: 1pcs - M5*20 for Nut2, 1pcs - M5*32 for Nut1, 1pcs - M5*18 for Nut3, 2pcs - M5*12 for adapter, 2pcs - M5 Four Pronged T Nuts Captive Threaded Inserts for Wood Furniture Obviously I would purchase the files and then send to you (Or you purchase and include it in the price) As much as I love my PKM and its iconic silhouette, it doesn't match the rest of the rails and modern bits ?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now