DEDSEC

£110, plastic slide version is less desirable.

Think it's actually a RA-Tech slide. Also has a ACTION USP.45 steel spring guide and recoil & hammer spring.

I take that back, just put a magnet that only conducts to steel on it and nothing. Most likely aluminium alloy.

People always complain that M249's are too heavy yet I've just held it for 35 minutes straight test firing it and it's no heavier than an L85 is?

People are more used to light airsoft guns....20 minutes running about with the real deal and they'd be panting

Try carrying an L85A1 with 9 magazines loaded with 5.56x45 rounds, a backpack with cleaning gear, medical gear, survival gear, in 40+°c.. For 20 hours.

Ares internals are known to be bad, but I've heard they're a bit better in this gun. Their plastic is sh*t though from what I have heard. Very cheap feel unlike good quality nylon fibre reinforced polymer stuff.

They seem quite pricey, just shy of £300. Not the kind of money I'd spend on some one night stand rifle. Thanks guys.

Most reports so far seem to be "my mate bought one and it's sh*t".

Looks great!

Thank you.

i meant to say its in a cod commercial, not from xD

I think it's combined with a Halo 5: Guardians commercial, aswell. Unfortunately makes the quote even more butchered.

Hmmmm - is it not also the ability to OUT the opponent:

outmanoeuvre, outhink, outwit, outgun, flush 'em out etc......

yes chucking loads of advancing troops works at a cost, but often the wiser tactical side can win - well that is the theory part, putting it into practice is not so straight forward we know

*some sites will accept a mosfet lock for semi lock. call n ask them

Please do tell me which, so I can avoid them.

I've also heard of airsofters creating DMRs where you cannot physically move the selector onto auto, sometimes with a welded part or part of a bolt stuck through the receiver'

Yeah the short mags a probably half the size of the 7.62s, maybe even less to be honest

Yeah M_P just checked out that link, looks pretty insane. You know what rail system that is on the front?

It's made by PWS I believe, can't say much more than that

In Afghanistan my platoon had some "target practice" on a pile of IED's.

Bet that looked amazing!

It only took 150+ rounds as for safety we was about half a mile away trying to hit a pile of cans, lunchboxes and plastic bags.

Try finding a game on medal of honour allied assault! Ghosts...different story...

But then you realise it's not a prank... Haha

OPSEC! It's not a joke!, Immature? Yes, but still very funny?! Maybe I'm just immature??! Especially when my mate hacks his wife's fb and posts' "her" desires for his massive endowment!! lol

Too right Happy. It would defiantly be awkward if I follow him up on that and he has in fact turned homosexual haha.

It's only for a sidearm though so is it really worth it?

Might as well buy one of those big barbeque red barrels. Would last awhile huh?

I not got gas - well CO2 but Monty & others have got green/propane so they can tell ya the exact adapters you will need and suggest size of bottle to start off with before you buy a great big tank of it

So that WE 3.0 would be too much for a plastic Tokyo Marui?

Apparently the driving physics are shite too

What a surprise, it's an Ubisoft game.

THE CRRRUUUUUUUUUUUUU!

(Watch the Two Angry Gamers video)

Interesting. Might be a project for me. Money is very limited so when I get some cash on payday I'll maybe start a M700 project?

The barrel I feel will be the hardest part. A 6.10mm though that's awful! Haha defiantly the first thing I'll try and change.

If you can get access to a machine shop then you're set, it's really easy to take the rifle apart and replace stuff.

That's where I'll struggle. I work in an office and live in the countryside so unless the office I work at is secretly MI5 with an underground lab with a metalwork room, I ain't getting no machines.

Then again I could always pop into my sons high school? They have a whole wood and metalwork department?

I wore a christmas sweater (totally off season) that looked like it was knitted by my mother yesterday. Top that #oldmanstyle.

+1 for all black socks. I smoke a pipe, no-one is going to top that

You used a hashtag, Tariq. You can't be doing that bad..

Inokatsu. Made of lovely and angel sweat.

Costs the earth and rare as unicorn poop.

Ohh those. Yes they cost an arm and and an leg they do.

Had one for a very small while, stupidly sold it. But then at £1000 new, it was a little bit expensive to own just as a wall piece.

Changing a spring is pretty straightforward but I'd take it to a store and 1) ask them to chrono it and 2) get them to change the spring if it needs it. Where did you get it from?

Bought it off this forum some time back.

Get it chrono'd somewhere then.

Sorry, if your friend gets one - would do well if I started reading stuff in full!

Haha no worries mate I might pick one up myself! Been a great help, thank you from me and my friend.

from what I hear, I would go for ICS. send a line to Ed thou! I'm sure he be glad to help you!

Stitch Me Up .. best place in the UK, FACT!

Awesome thanks guys, just sent an email to them. However, in the mean time any good places to get pre-made patches? Got a lot of velcro space so need to fill it all up.

Mil-Spec Monkey patches from Fire Support.

http://www.fire-support.co.uk/category/patches-milspec-monkey/

30C is a bit too high, and 20's a little low.....

So Goldilocks should choose a 25c that is just right

sorry just being silly once again

I have bought some of these:

ebay item: 131212457347

yes needs a converter but size is perfect fit for some guns - max oomph for a compact size - use an adpter lead atm but will resolder some tamiya on there eventually - just size shape is good for me

2 cell = 3 wires for 7.4v lipo

3 cell = 4 wires for 11.1v or 9.9v life batteries

Righto. What motor?

M120 should give up to 400FPS depending on the air seal quality. No point in purposefully going with a weak motor. Go for the SHS High torque or ZCI high torque motor. AK2M4 are a good shop to buy the ZCI motor from and you can find SHS high torques anywhere. Both are reliable and fantastic bang for buck,both are the better motors around.

Brilliant, thanks buddy.

Yay! Bullet belt!

I can feel my inner Rambo coming along.

Haha ok good news they do sell them bad news they never had any worse news they think they sell for bout 30 pounds so still no good