sp00n

thanks mate well i have ordered a sp85 ...... whats the worst that could happen

1) TM 2) electric, semi auto is a major plus, though the range is slightly less then a spring (site FPS rules depending etc)

(sorry i have forgot how to link video etc) http://youtu.be/xeiXxB4gc04 << like this but rubber coated (impact resistance), and with more boom

that seems really low for a new G&G, they are usually shooting around the 330'ish mark (my cm16) upto 340'ish (my g&g sr25) but i agree with monty. Just out of interest have you field stripped it?

ok so for the past year off/on i have been rebuilding a 2nd hand G&G l85, and now being at the stage of almost ready to skirmish, i am have having an odd spring issue. little history, when i bought the gun it wasnt work, this i fixed with a new trigger and a small rewire. then disliking the none original piston/spring configuration, i swapped it for a new G&G L85 piston head, new spacer and new piston (please note the spacer is used as this has an original PSG-1 style top end, but the lower has been modified to v2/3 sector gear). now on to me being abit thick, when i finally had all this done/cleaned/ready etc , rather than use a standard spring, i fitted a psg120 spring ... and got 370fps on 0.25's so i ordered and fitted a psg100 spring ....363fps on 0.25's at this point i realized that i should have used a standard spring , and i found a bag with what i believe to be a sp100 spring in it .... 368fps on 0.25's other than going out and ordering another spring and trying that, anyone have any idea's on what spring i should fitt (to be below 350, on 0.2's) normally i would say a sp100, but atm i am totally unsure

Hey guys i am back so what have i recently bought..... loads of stuff ... but recentest for my G&G L85:- G&G OEM barrel + hop guarder PSG100 spring (as i am getting 370fps with 0.25's on the PSG120 spring ) Ant-supplies RIS adapter (so i can use the scope below) 4x32 scope (same as on my CM16) and ASG MK23 SOCOM (that's right i have finally bought myself a gas gun, it wont be replacing my work horse CYMA G18c AEP, this is just for a little project ... and it was cheap )

if your good with a soldering iron, you could make your own mosfet i did and it works very very well admittedly it is basic and dosnt any of the features others have etc

When I get round to rebuilding my mp5k with a new 8mm gearbox, I have a lonex a2 motor to go with my shs 13:1 gear set

i have bought from them twice with no probs using paypal in the past. by sounds of it the purchase was not completed, so you have not been charged (since like you said above, it dosnt appear in your paypal history, though check for similar amounts on the same day to be 100%) as you normally get a "select your postage" page, which then leads to a "click here to complete you transaction page" etc etc You should also get confirmation emails etc. if in doubt like others have said, clear history and reset password.

WooooHooooo Lonex A2 motor has arrived let the bb Hosing MP5K build start

I have just ordered a lonex a2 motor almost time for my mental mp5k build

Just got my guarder sp120 spring ready for my mp5k rebuild only a lonex a2 motor to get

2 x 40mm multicam pouches 1 x 3 way MP5 pouch and i cannot get AK mags in either <<this is a complete lie

Only I already had the smoke pouches, and had a bid on the 9mm pouches (which I never increased) BEFORE you said it

2 osprey smoke grande pouch 2 osprey 9mm pouch and my ohshiboom fits in neither, too slack in smoke, too tight in 9mm

anyone after a cheap CM.028A TACTICAL >>>> http://www.taiwangun.com/en/cm-028a-tactical today only (i think its only a 1 day offer but i may be wrong) 88.66Euro's (or £65 depending on euro exchange rate) with FREE DELIVERY F-U fire support

they are/have ... they are just "out of stock" (or "coming soon" if the pic is to be believed) on ohshiboom's website. well i have 2 smoke grenade pouches on there way, but from having a look at a few osprey pouches last skirmish, i think the 9mm pouch may be better (but i am not 100% sure it was a osprey pouch)

i want that pin i do wish they would get the new pins in stock for the original shocks though

i have just received :- 2 osprey sharp shooter pouches energy enhanced V3 8mm gearbox (though the 8mm bearing dont look that good in my honest opinion ) 30 duracell LR44 batteries, as my 552 holo site seems to eat them 5m of reflective tape for my ohshiboom ... i like it and dont wanna loose it

i though it was likely to be some lost in translation bug, Japanese>polish>english translation, or should i say thats what i figured. but it could be P&J is some re-brander

if you look in the taiwan gun description is say a&k is the manufacturer just a quirk of the website i guess

just received a set of SHS 13:1 gears

Got and have fitted my new psg-100 spring in my g&g l85 ..... 320fps on 0.25's

i have just received my PSG 100 spring to replace the PSG 120 spring i fitted into my G&G L85, which bumped the FPS from 260 (on 0.2's) to a unusable 380fps (on 0.25's) fingers crossed for somewhere near 330'ish fps lol