sp00n

updated! added info about fitting a normal silencer instead of the standard silencer (as the standard silencer is a barrel extension and increases fps from 350 to 400!!)

ebay was the cheapest place i found (eBay item number:131281620991)

just got some PIR's ..... think i am gunns mount one in my claymore ... and the others

its only a springer, due to the length its kinda like a short pump action shottie that said i would love a kwa gas "robocop" gun

1) i like guarder springs myself, a sp100 should see 350fps with 0.2's (think i put up a chart somewhere that said what you *might* for a particular spring etc) 2) - i cannot answer this as i despise tight bore barrels (the one that my 2nd hand G&G L85 had in it did nothing but cause problems imho, swapped it and the hop for standard items ... huge range and no problems) .... there is a reason why TM ship there VSR's with 6.08 barrels (note admittedly you will see a minor FPS upgrade with a TTB) 3) this is a personel choice thing ... thought imho note-able hop rubbers are G&G and TM

back in the "old" days (20 years ago) me and my brother used to have an ongoing bb gun arms race. i don't recall my first gun, but i did have mainly springers (i think they may have been tamyia or TM), P226, "robocop gun", spas 12 (the one with a 60rd mag in the cartridge tube, either single shot or tri-shot), then a gas NBB D-eagle .... then finally back in 1998 i bought my TM MP5K Kurz i still have them but when i did get into airsoft (over 2 years ago now) ... G&G CM16 DST

a mess or a ghillie suit ... or both

one thing that drives me nuts about some websites is postage .... if something fits in an envelope (and is carry-able by royal mail, say a hop rubber) i do not expect to pay the same as a shuttle launch!!

Yeah that would be a nice mod to have. If you wanted a pre-engauge all i suspect (i may be wrong here) you would need is the sector gear, then just remove 2 teeth (as the G&G/Army has a 19 tooth "psg-1" piston, insted of the 16 tooth pistons in most v2/3 gearboxes) ... an interesting mod

i don't think so (but i may be wrong here), as its all done by the sector gear in this gearbox. also please note this gearbox has a mechanism to release the anti-reverse latch, that is used to release tension on the piston/spring

spare "complete l85 gearbox" off ebay £58 (nothing wrong with my l85 gearbox, but i want too see what the pre-engauge/pre-cocking is like, and a spare would be nice )

i use black hawk neoprene knee pads, really nice and comfy, there the soft knee pads with out the hard plastic outer, had them for over a year now. Never had them fall down, but 1 has fallen off when i put it on wrong.

its trust .... and that is worth more than anything

when i was emailing ohshiboom earlier this year (or it may have been last year, i don't recall), they was looking to release a timed bfg "soon™"

thanks for that mate, however i feel a little pi$$ed at them as they still owe me for a few bits , so i wont be trusting them again (specifically = SV-12 barrel end : 2790 yen)

anyone know of a decent TM parts supplier, for uncommon parts (i was using pulse until they went under) ​(please note i have tried uk retailers .... they don't seem interested though)

depends what you want, if you want a gas blow back pistol, then i am told the TM G18c is good/excellent (i have no experience with it) however if you want a g18c that works in all weather and has a 99rd mag, i urge you to consider the cyma g18c, the only drawbacks are its reduced fps (some say rang is reduced, but if properly setup, range should not be an issue)

cyma cm.030 G18c AEP ... with 99rd mag naturally

i had bought a well r4, 2hicap mags and a silencer, but it looks like the R4 is gunna have to go back, as there is something wrong with the trigger

thanks mate

you wont regret it far cheaper then pyro (even cheaper still if using shot gun primers ), i now have 2 ohshibooms .... and i was honestly considering a 3rd

gotta take advantage of ohshiboom's black friday Shock Colour Black 9mm Shotgun Primer Adapter Redesigned Shock Original Safety Pin and Ring

Has anyone used airsoftglobal.com? what was your thoughts? good/bad .. delivery etc thanks in advance

loads and loads of electronic components 4x ITW nexus 1" buckle 4x ITW nexus 1" ladderlock 4m Single Sided Crye Multicam MTP Camouflage Military Spec 25mm / 1" Webbing a pair of oakley tactical gloves in tan CYMA Glock Gearbox (CM09, AEP)