concretesnail
-
Posts
657 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by concretesnail
-
-
Unless the barrel is sitting too far back into the hop unit I doubt the barrel is the issue, if it were then all of the mags would feed poorly.
As Asomodai mentioned its likely midcap syndrome and nozzle combination.
-
It should fit, though it might me worth having a look at ak2m4.co.uk
They usually have standalone shells and if you retain the components from your current box it'd be cheaper and make changes that you want to.
-
I've had grips with sections of relief in them for tape switches to sit in, mostly vertical grips and bipod types. in the end I've given up on them, the angle is never quite right for my hand positions or length of fingers.
I started using heat shrink or tape on better grips and more recently I picked up some sectional elastic sleeves and they have been great.
-
As you mentioned don't opt for a clone. One of the fpv guys I fly with opened a clone up out curiosity and it wasn't a good thing to seeing long that people are buying these and then charging large lipos with them.
If your looking at a new charger I'd suggest looking at hobby shops. I use hobbyrc.co.uk a lot and the customer service has always been great. They stock sky rc and idst chargers, both of which are solid and worth a look.
-
-
G&g do a metal mag for 308 range, if you want that sr25 look. Not cheap though.
https://www.surplusstore.co.uk/manufacturers/g-g/g-g-g2h-308-metal-magazine-100rd-mid-cap.html
-
I've mixed capacity before as the packs are the same cell count but don't mix cell counts (different total voltage).
If all your packs are resting at the same voltage then its OK.
For a good guide it's worth having a run through videos by Joshua Bardwell as a good guide.
If you do decide that it's not for you then I'd look at a multipack charger.
Skyrc and isdt both do a good duel charger, it's effectively two chargers sharing a psu, but you can set each one separately.
-
-
There's the g&g 308 range with a range of models all having different barrel lengths
-
2 hours ago, RostokMcSpoons said:
Even better, get one of these....
I can vouch for the fact it looks great on the sight, and with a poly carbonate protector it should be BB-proof, rather than sacrificial.
I picked up one of this sellers protectors the other day, for a light, and the quality is good.
-
13 minutes ago, Emergencychimps said:
Thats a good shout, heard good things about his products and service he provides. Not cheap though
Good stuff tends not too be.
-
-
Streamlight do make some good stuff.
Have a wander over to tactical waffles. Site is minimal but the chap who runs it often has high end light setups for sale on a discord thread I'm on so I'd give him a shout via the contact point on the site.
-
-
You'll need an aeg buffer tube with mounting hardware, then you'll likely have to cut down the mounting tube to match the length required in the buffer tube or make a spacer.
You'll also need an aeg sling plate to seal the back of the receiver and guide the wiring into the tube.
Ak2m4.co.uk is a good place to start for buffer tube, they had some with hardware included.
- TheFull9 and RostokMcSpoons
-
1
-
1
-
5 hours ago, RostokMcSpoons said:
I'd like to fix an M4 collapsible stock to my AR15... but that has a fixed short buffer tube, and the wiring might be a problem. Is there a way to do it?
Yes, I've just done it with my 308. It foes require some cutting and additional/alternate parts, shot me a pm or make a new thread it's not a quick question thing.
- Paul72 and RostokMcSpoons
-
2
-
Finally got where it wants to be I think.
Custom rail and folding stock, pts stock and grip red light and tracer in the suppressor. Padded 5.11 sling and magpul 7.62 pulls
- EDcase, PopRocket123, Paul72 and 1 other
-
4
-
Like the other voices here, I am showing the signs of joyful abuse of the body over the years.
Multiple reconstruction surguies has taught me there is no substitute for continuous conditioning.
I started, many moons ago, using a program called romwod, range of movement worked on daily, it's an Internet based video program of daily stretches and holds for strength and conditioning and its been great. It instantly helped me and I find it easier to fit in than classes, gym, etc.
On days where I know I'm going to pushing it activity wise I use compression garments, company called skin makes the ones I like. And a recovery paste made by climbon (It amazing but not the cheapest).
Like you i dont want to give up what I enjoy for age.
-
Another vote for milspec, I've used them lots over the years but it's been a little while since I last used them
-
-
If the braking isn't an issue something else is affecting how the nozzle seats when the piston drops.
I'd look change the maxx units out for something else and also look to change the spring that pushes the hop unit back to the gearbox.
It could be combination of things like the feed tube slightly lifting the hop away or spring not strong enough or long enough to reseat the hop chamber
-
It's iis fairly normal I'm afraid, they need to have enough wire for the stock to be fully extended, but that means the stock you have it the harder it is to get everything in.
-
I have sound but no picture video wise
-
Have you tried running it all with braking off?
Zci barrel causing misfeeds and jams are mad bull barrels any good
in Electric Guns
Posted
It might be foxed with a new tappet spring, or cutting a loop or two from the spring you have in already, to tighten it up and put more tension on the nozzle.
But
If you try not filling the mags completely and the issue resolves then I'd look to either bind or clip the magazine spring if it's a magazine that's already had significant use. If however it's a new magazine I'd try filling it completely, and leaving it a while, then trying again as the time spent under compression will take some if the strength out of it.