strykerles

I found what it is for, I thought I recognised it as I have a WE M9 and they are pretty similar it fits into the back of the safety catch that goes into the body

disappeared into a teching rabbit hole?

I'd say he was being cheeky and seeing if he could get away with it

Good idea, just put it over the harness so it stays loose and can keep the belt 😁

Looking for suggestions on a lightweight vest for some protection I originally had a Osprey MK4 with the cummerbund but I found it to be heavy and restrictive although the protection was good I have since gone to a belt and harness and it's much easier to move around but the protection is none existent and I end up with the kids doing a dot to dot drawing on me after a game (and the Mrs isn't happy) Ideally I'd like something with more protection which is easy to move around in Suggestions and any help is appreciated thanks for looking

I recently purchased a Lancer tactical nightwing from a boneyard after correcting the AOE and fixing the wobbly stock I was going to change the motor out for a High torque I had spare It didn't fit, the motor was too fat compared to the stock lancer one, I'd say about 4mm wider does anyone know any slimmer high torque motors as I've never had this problem before thanks

thanks for that, must say I do like the externals :D and half retail price with possibly only a couple of small faults it's worth a punt

Just purchased the above gun and it apparently has the following issues Whiney motor loose stock I'm assuming it will either need to motor height adjusting or the AOE changing, I already have another buffer tube as the advert says it's bent If I am going to crack it open would there be any other things I should consider changing while it's open? thanks for looking

I took up the valkyrie offer too

I've used a few brands trying to find ones with good consistency I've experienced the same as @Rogerborg with shattering blaster bbs, outdoors I've used lancer bio bbs and they've seemed quite good for the price (£12.99 for 5100 0.25s) indoors I've used geoffs, nuprol and asg mostly I would recommend the nuprol RZR as they seem to have been the most consistent on testing at home I know nuprol get hate but it's my opinion on testing

Got a G&G Rk-74 on here even after people told me not to after some work on the gearbox and changing the mosfet it's now my favourite :D

Yes it's sitting correctly

after taking it apart and putting it back together I'm 90% sure it's the slide not travelling back far enough to load the next bb, whichever gas i use it makes no difference If I manually rack the slide it fires every time

could the recoil spring be the culprit and stopping the slide travelling enough?

I tried this as I have a WE samurai edge but it doesn't like the mags and won't fire properly

using WE green gas with proper marui mags, the slide just doesn't go back far enough but goes back fine manually could always try red gas.......................... 😂

I'm starting to think it's to do with the fact the slide doesn't travel all the way back to force the hammer down. If I manually pull the hammer back the trigger moves is this to do with the decocker? I'm not very clued up on these tbh

As above, after firing the trigger seems to stick back and won't return 75% of the time. Ive cleaned and lubed the mech but it hasn't changed. Also the slide won't lock back on empty, slide doesn't seem to go back far enough Starting to regret getting this gun as I've had nothing but problems since I first used it where it performed great 20201003_160448.mp4

So I disassembled the slide and nozzle assembly, cleaned, lubed and put back together, the nozzle seems stiffer than before now and it's still doing the exact same thing it was before. I'm at a bit of a loss tbh

Without the mag inserted it occasionally does it. Just using marui mags Originally the slide was sticking and wouldn't come all the way back but that seems to have corrected itself and now there's the problem with the nozzle

Recently purchased a TM m9a1 and the nozzle appears to stick slightly when loaded with a magazine. on closer inspection the magazine seems to push the nozzle up slightly which makes it stick If I manually pull the slide back, as soon as the nozzle clears the magazine it snaps back this is making the gun fire every other shot as it loads but can't fire and the next round pushes the previous out

I've had a couple from patrolbase but most do actually work and are being sold as boneyard because they are returns or ex display