HuttArmouries

E&l 104 I believe. Finally found a scope setup I like for it and overall got it comfortable for me. Ive been wanting to fully modernise one of my aks for a while and I'm happy with the result. Also the cmore makes for a good poor mans kobra >->

One ak from each of the 3 best known manufacturers. In order e&l, Lct and cyma. I love modernising them but I also like to keep a classic around.
 

A small selection of some  of the stuff I make. I also do metal work but breastplates and chainmaille arent really relevant here though I do intend to make some aluminium sci fi body armour at some point. 

One ak from each of the 3 best known manufacturers. In order e&l, Lct and cyma. I love modernising them but I also like to keep a classic around.
 

Upper reciever basically done. will be starting on the lower soon. The v3 gearbox fits perfectly though I will need a little extension for the hop up 3d printed to make it work with m4 mags. 

Holster for my h8r
 
 

Got this second hand for a very low price. Firesupport used to do this as a custom option. Its a tm recoil ak102 with lct furniture and a modified ak hop unit to allow the use of regular ak mags. It needs a new selector plate and a few screws here and there but otherwise seems in very good nick. And at the end of the day it cost me little enough that I can probably flog the lct furniture and get most of my money back!

Got this second hand for a very low price. Firesupport used to do this as a custom option. Its a tm recoil ak102 with lct furniture and a modified ak hop unit to allow the use of regular ak mags. It needs a new selector plate and a few screws here and there but otherwise seems in very good nick. And at the end of the day it cost me little enough that I can probably flog the lct furniture and get most of my money back!

Got this second hand for a very low price. Firesupport used to do this as a custom option. Its a tm recoil ak102 with lct furniture and a modified ak hop unit to allow the use of regular ak mags. It needs a new selector plate and a few screws here and there but otherwise seems in very good nick. And at the end of the day it cost me little enough that I can probably flog the lct furniture and get most of my money back!

One ak from each of the 3 best known manufacturers. In order e&l, Lct and cyma. I love modernising them but I also like to keep a classic around.
 

One ak from each of the 3 best known manufacturers. In order e&l, Lct and cyma. I love modernising them but I also like to keep a classic around.
 

One ak from each of the 3 best known manufacturers. In order e&l, Lct and cyma. I love modernising them but I also like to keep a classic around.
 

Upper reciever basically done. will be starting on the lower soon. The v3 gearbox fits perfectly though I will need a little extension for the hop up 3d printed to make it work with m4 mags. 

Nice simple rhino holster for a commission

So for those that dont know im an armoursmith/ blacksmith and ive decided to take on a gun project using these skills. Specifically the ultimax 100 mk 5 because I love the ultimax but Id also like to be able to use my regular m4 mags and that version has a magwell.  Made a mockup so far. A v3 gearbox sits about perfect in this but on the real one the upper and lower recievers are welded together. If I did this Id never be able to get the gearbox out.
 
Im probably gonna try to make it in a way that means the rear end cap can come off and the recievers can come apart. One of the main reasons I chose this gun is because its basically just 90 degree boxes for most of the reciever. Ill probably just be brazing on other pieces of metal for all those details on the side of it. Evetything else will be hammered out of 2-3mm steel. I will probably also be getting a friend to 3d print some of the brackets and internal parts for the barrel and hop. Should be a fun project. 

 

Upper reciever basically done. will be starting on the lower soon. The v3 gearbox fits perfectly though I will need a little extension for the hop up 3d printed to make it work with m4 mags. 

Holster for my h8r
 
 

Two new holsters. Havent bothered making them nice and neat as the only leather I have right now is covered in scars and defects and I cant get more. They do both work perfectly however and are mounted onto plates which allow me to use them with molle. I can also change the angle they sit at quite easily. 

Upper reciever basically done. will be starting on the lower soon. The v3 gearbox fits perfectly though I will need a little extension for the hop up 3d printed to make it work with m4 mags. 

Metal 3d printin normally works by adding a thin layer of metal powder then using a laser to melt it then adding another layer and so on and so on and then digging the finished pieces out of the powder. There are some direct extrusion metal machines but they tend to be less detailed. 

Reciever mark 1 unfortunately started developing some pretty bad cracks so I decided to ditch it, switch steels and try again. Second one went much more smoothly. Given that I get all my steel as spares and offcuts from a factory I dont necesarrily know what im working with until I start so these things happen.  Needs a lot of smoothing out but the sides are level, the angles are mostly 90 degrees and Its all looking pretty good. Lower shoud be a lot easier as its 1 straight box. 

Nice simple rhino holster for a commission

So for those that dont know im an armoursmith/ blacksmith and ive decided to take on a gun project using these skills. Specifically the ultimax 100 mk 5 because I love the ultimax but Id also like to be able to use my regular m4 mags and that version has a magwell.  Made a mockup so far. A v3 gearbox sits about perfect in this but on the real one the upper and lower recievers are welded together. If I did this Id never be able to get the gearbox out.
 
Im probably gonna try to make it in a way that means the rear end cap can come off and the recievers can come apart. One of the main reasons I chose this gun is because its basically just 90 degree boxes for most of the reciever. Ill probably just be brazing on other pieces of metal for all those details on the side of it. Evetything else will be hammered out of 2-3mm steel. I will probably also be getting a friend to 3d print some of the brackets and internal parts for the barrel and hop. Should be a fun project. 

 

Nice simple rhino holster for a commission

Started hammering out the upper reciever for the ultimax. Upper is 2mm steel. the lower will be 1.5mm