HuttArmouries

Here is one of the chunks Luke posted about the whole thing. https://www.facebook.com/share/p/197sBsmGQP/

After this they did start dealing with warrenty and sales in the uk for all the remaining warhead stock I believe but this is one of the inciting incidents. 

Here is one of the chunks Luke posted about the whole thing. https://www.facebook.com/share/p/197sBsmGQP/

After this they did start dealing with warrenty and sales in the uk for all the remaining warhead stock I believe but this is one of the inciting incidents. 

Well as promised I grabbed someone elses impulse buy. Just took a little longer than I expected. 

First impressions are it is fairly light. At least until I slapped the zenit stuff on it. Even now my tokyo marui akm with a steel kit on it is a fair whack heavier than this is. The finish is a thick plasticky paint to the point that I had had to check with a magnet to sooth my paranoia of being bunged a cheap ak in a vfc box XD.  I took apart the mag and greased as shown in the explosive enterprises video and the kick is very nice. Hop performs great right away without ever touching it. Im getting exactly the same peening on the left side of the bolt carrier as shown in the EE video so they haven't changed anything there. The hammer barely seems to move on firing. It never touches the back of the carrier. It almost reminds me of an mws hammer moving just enough to press the valve. All feels solid and im more of a shooter and tinkerer than a collector so the small inaccuracies dont bother me. Snagged 3 more mags in a sale and waiting for them to arrive. 

Aeg zenit handguard went on but required some filing around where it sits in the handguard retainer, side rail went on no problem. 

I tend to get aliexpress optics a lot in the sort of mid range and Ive not yet had one damaged by being run on a gbbr but that is obviously partly good luck in the qc lottery. The only optic ive had trouble with was an old cmore like this which lost zero a lot and the battery bounced out of place. All of the others I have used have far more solid mounting solutions. 

https://m.media-amazon.com/images/I/41yhdJbGKvL.jpg

It also depends a lot on the gun. Id feel fairly happy mounting nearly anything on my tokyo marui gbbrs as they have fairly soft impulses overall but Id go for something a bit more solid on my vfc's 
 

Got a tm desert eagle and wanted to mount a red dot more modern than the traditional options. Made this little scope base to fit my knockoff aimpoint acro and cut the top off a cheap ammomax holster to fit it. Thinking of making a variant to fit aimpoint micro style sights and rmrs. Any other sorts people would like to see?

Got a tm desert eagle and wanted to mount a red dot more modern than the traditional options. Made this little scope base to fit my knockoff aimpoint acro and cut the top off a cheap ammomax holster to fit it. Thinking of making a variant to fit aimpoint micro style sights and rmrs. Any other sorts people would like to see?

Got a tm desert eagle and wanted to mount a red dot more modern than the traditional options. Made this little scope base to fit my knockoff aimpoint acro and cut the top off a cheap ammomax holster to fit it. Thinking of making a variant to fit aimpoint micro style sights and rmrs. Any other sorts people would like to see?

Got a tm desert eagle and wanted to mount a red dot more modern than the traditional options. Made this little scope base to fit my knockoff aimpoint acro and cut the top off a cheap ammomax holster to fit it. Thinking of making a variant to fit aimpoint micro style sights and rmrs. Any other sorts people would like to see?

Finalized the handguard. Went back to the thicker suppressor so the side mlok is truly useless now. The price paid for aesthetics. 

Finalized the handguard. Went back to the thicker suppressor so the side mlok is truly useless now. The price paid for aesthetics. 

First prototype handguard. Pretty happy with the overall look but ive smoothed out the transition up to the main body of the gun a bit for the next version

Finalized the handguard. Went back to the thicker suppressor so the side mlok is truly useless now. The price paid for aesthetics. 

First prototype handguard. Pretty happy with the overall look but ive smoothed out the transition up to the main body of the gun a bit for the next version

So I really like the look of some of the metal 3d printed flow through suppressors and I needed a longer barrel and handguard setup for the ghm 9 I picked up cheap. As much as the integrally suppresed kit lambda sells does look cool it kinda ruins the gun for me because it makes it so much longer. So this suppressor will be the base for me to make something a little more compact. Starting on the handguard to go over it tonight. This one in particular sleeves over the original barrel. Once I have the design finished I may make one to go on other airsoft guns and slap it up for sale somewhere. 

So I really like the look of some of the metal 3d printed flow through suppressors and I needed a longer barrel and handguard setup for the ghm 9 I picked up cheap. As much as the integrally suppresed kit lambda sells does look cool it kinda ruins the gun for me because it makes it so much longer. So this suppressor will be the base for me to make something a little more compact. Starting on the handguard to go over it tonight. This one in particular sleeves over the original barrel. Once I have the design finished I may make one to go on other airsoft guns and slap it up for sale somewhere. 

So I really like the look of some of the metal 3d printed flow through suppressors and I needed a longer barrel and handguard setup for the ghm 9 I picked up cheap. As much as the integrally suppresed kit lambda sells does look cool it kinda ruins the gun for me because it makes it so much longer. So this suppressor will be the base for me to make something a little more compact. Starting on the handguard to go over it tonight. This one in particular sleeves over the original barrel. Once I have the design finished I may make one to go on other airsoft guns and slap it up for sale somewhere. 

So I really like the look of some of the metal 3d printed flow through suppressors and I needed a longer barrel and handguard setup for the ghm 9 I picked up cheap. As much as the integrally suppresed kit lambda sells does look cool it kinda ruins the gun for me because it makes it so much longer. So this suppressor will be the base for me to make something a little more compact. Starting on the handguard to go over it tonight. This one in particular sleeves over the original barrel. Once I have the design finished I may make one to go on other airsoft guns and slap it up for sale somewhere. 

So I started buying in chicom rigs and stuff as some of you may have noticed but this was all a ploy so I could get them myself cheaper XD. So ive started modding this one to use with my vfc m16a1 and xm177. Foam spacers in the bottom of the pouch so the mag sits right and I made some tabs to close the pouch out of my leatherworking scraps. As much as the original toggles are cool I dont trust them to hold my £40 gas mags.  I didn't bother with neat as you can probably tell but It is plenty strong. Having an industrial leatherwork sewing machine on hand is fun XD. Im considering swapping a grenade pouch out for a holster but I'm not sure what to do with the other. Any ideas?

So I started buying in chicom rigs and stuff as some of you may have noticed but this was all a ploy so I could get them myself cheaper XD. So ive started modding this one to use with my vfc m16a1 and xm177. Foam spacers in the bottom of the pouch so the mag sits right and I made some tabs to close the pouch out of my leatherworking scraps. As much as the original toggles are cool I dont trust them to hold my £40 gas mags.  I didn't bother with neat as you can probably tell but It is plenty strong. Having an industrial leatherwork sewing machine on hand is fun XD. Im considering swapping a grenade pouch out for a holster but I'm not sure what to do with the other. Any ideas?

I used to run carriers but these days if im running an lmg I just use a belt and if im running any of my rifles I have a selection of super cheap chest rigs and one nicer one for if I ever decide to go on a milsim. I mostly run stuff like chicom repros from china because at £15 each with a bit of sewing I can have one for each type of mag and they are reasonably nice bits of kit. 

Thanks. Ill have a look at it. 

 
 
The vfc stuff does use standard gbb barrels but im more looking for something that works right now rather than a top of the line upgrade. The site I go to is 90% dense woodland so I have never needed the best of the best XD appreciate the suggestion though. I probably should have put a budget on the post

I have a bunch of that extended one with the one piece feed lips. Its for an m93r made originally by kj works for a company called SI. They are rare as rocking horse shit but Hfc do make a clone of it so it could be a mag from either of those. Could you grab a picture of the valve assembly on the back of the other one? Looks to be a hi capa mag but cant tell what sort. 

That is mega mate!

So for a long time my a&k pkm was my most used gun. I loved it but I hit a point where I desperately needed money to buy stock for my business. And so it was sold. I did miss it a lot and recently things have gotten more stable. Then this lct full steel pkp popped up and here we are. Makes me glad ive been working out. Unfortunately my normal rifle slings are making unhappy noises at me under the 11kg (not including the handguard on it and the optic I will be putting on it) if anyone has a a recommendation for a good padded sling id be happy to hear them as I intend to run this a lot. 

Just nabbed a mimimi sling though its a desert one so it will need some spray paint. The gpmg slings seem to be impossible to find for under £40 but the minimi one was £13 posted so thanks!