warlord

New torch for the Evo.
 
I shopped around looking for an Inforce WMLx clone and saw they now have a Gen2 version. The Gen2 has a few shape changes that I think suit the Evo.
 


 
I found it on Aliexpres from a supplier called Aimtis - https://www.aliexpress.com/store/2663121
 
It arrived today but sadly doesn't take my 18650 vape style batteries. Looks like I need to get some C123A's or equivalents.
 
Seems well made. I really like the RIS fixing. It's a spring clamp with a locking screw. So it's super easy to get on and off.

New torch for the Evo.
 
I shopped around looking for an Inforce WMLx clone and saw they now have a Gen2 version. The Gen2 has a few shape changes that I think suit the Evo.
 


 
I found it on Aliexpres from a supplier called Aimtis - https://www.aliexpress.com/store/2663121
 
It arrived today but sadly doesn't take my 18650 vape style batteries. Looks like I need to get some C123A's or equivalents.
 
Seems well made. I really like the RIS fixing. It's a spring clamp with a locking screw. So it's super easy to get on and off.

I like that... but without the rds. Like Sigs over Glocks. They just seem to have some style and not like a stamped out rectangle.

Finally got my old two tone WE Sig 226 painted and Doctor sight mounted. Next is some internal upgrades and a touch and maybe a tracer.

Still took your money and shipped from same place though.....
 
well - like I say the GF points has gone a bit $hit lately what remains of the now limited range of freebies

More than your £30 sawflys. £45 for the 3 lens kit and another £12 for the foam frame. But because Bolle sent me a free nose piece which arrived today, I effectively have 2 pairs. One sun glasses, one airsoft.

Many thanks to @ImTriggerHappy the minute my shiny new ASG Scorpion Evo A1 came through the door the 3D printed selector deletes were waiting for it.
 
Not having taken an Evo apart before I found it quite a challenge. There is a good video online by Patrol Base that disassembles one, but it missed out one vital screw - The one inside the trigger guard.
 
To remove the lower receiver you need to:
 
Press out the pin (where the stock clips in when folded) Remove the motor from the hand grip by removing the two outer hex screws (don't touch the big centre hex as that's motor height adjuster) Remove the hand grip. by removing the two hex screws on either side and the four small hex screws from deep inside the grip. Make sure they don't fall into the gearbox! Remove the hex screw inside the trigger guard. You'll want a longish allen key to go through the hole in the hand guard Then pull the lower receiver down and off. You can then position the fire selector(s) so you can get at the tiny hex grub screw that hold them onto the inner gear. Once you have loosened the grub screw the inner gear will pull off and you can then replace the outer selector with the replacement indicator. Take the tiny grub screw from the existing fire select lever and fit it into the 3D printed replacement indicator To get the right one fitted make sure it mirrors the gear positioning and indication mark position of the opposite side Reassemble and take regular deep breaths as you swear about trying to get those four tiny screws back into the hand grip.  
 

My in-laws haven’t done too bad. 70 years old but they know me so well. Nice little birthday present. 

Always glad to help buddy.

Many thanks to @ImTriggerHappy the minute my shiny new ASG Scorpion Evo A1 came through the door the 3D printed selector deletes were waiting for it.
 
Not having taken an Evo apart before I found it quite a challenge. There is a good video online by Patrol Base that disassembles one, but it missed out one vital screw - The one inside the trigger guard.
 
To remove the lower receiver you need to:
 
Press out the pin (where the stock clips in when folded) Remove the motor from the hand grip by removing the two outer hex screws (don't touch the big centre hex as that's motor height adjuster) Remove the hand grip. by removing the two hex screws on either side and the four small hex screws from deep inside the grip. Make sure they don't fall into the gearbox! Remove the hex screw inside the trigger guard. You'll want a longish allen key to go through the hole in the hand guard Then pull the lower receiver down and off. You can then position the fire selector(s) so you can get at the tiny hex grub screw that hold them onto the inner gear. Once you have loosened the grub screw the inner gear will pull off and you can then replace the outer selector with the replacement indicator. Take the tiny grub screw from the existing fire select lever and fit it into the 3D printed replacement indicator To get the right one fitted make sure it mirrors the gear positioning and indication mark position of the opposite side Reassemble and take regular deep breaths as you swear about trying to get those four tiny screws back into the hand grip.  
 

Many thanks to @ImTriggerHappy the minute my shiny new ASG Scorpion Evo A1 came through the door the 3D printed selector deletes were waiting for it.
 
Not having taken an Evo apart before I found it quite a challenge. There is a good video online by Patrol Base that disassembles one, but it missed out one vital screw - The one inside the trigger guard.
 
To remove the lower receiver you need to:
 
Press out the pin (where the stock clips in when folded) Remove the motor from the hand grip by removing the two outer hex screws (don't touch the big centre hex as that's motor height adjuster) Remove the hand grip. by removing the two hex screws on either side and the four small hex screws from deep inside the grip. Make sure they don't fall into the gearbox! Remove the hex screw inside the trigger guard. You'll want a longish allen key to go through the hole in the hand guard Then pull the lower receiver down and off. You can then position the fire selector(s) so you can get at the tiny hex grub screw that hold them onto the inner gear. Once you have loosened the grub screw the inner gear will pull off and you can then replace the outer selector with the replacement indicator. Take the tiny grub screw from the existing fire select lever and fit it into the 3D printed replacement indicator To get the right one fitted make sure it mirrors the gear positioning and indication mark position of the opposite side Reassemble and take regular deep breaths as you swear about trying to get those four tiny screws back into the hand grip.  
 

Many thanks to @ImTriggerHappy the minute my shiny new ASG Scorpion Evo A1 came through the door the 3D printed selector deletes were waiting for it.
 
Not having taken an Evo apart before I found it quite a challenge. There is a good video online by Patrol Base that disassembles one, but it missed out one vital screw - The one inside the trigger guard.
 
To remove the lower receiver you need to:
 
Press out the pin (where the stock clips in when folded) Remove the motor from the hand grip by removing the two outer hex screws (don't touch the big centre hex as that's motor height adjuster) Remove the hand grip. by removing the two hex screws on either side and the four small hex screws from deep inside the grip. Make sure they don't fall into the gearbox! Remove the hex screw inside the trigger guard. You'll want a longish allen key to go through the hole in the hand guard Then pull the lower receiver down and off. You can then position the fire selector(s) so you can get at the tiny hex grub screw that hold them onto the inner gear. Once you have loosened the grub screw the inner gear will pull off and you can then replace the outer selector with the replacement indicator. Take the tiny grub screw from the existing fire select lever and fit it into the 3D printed replacement indicator To get the right one fitted make sure it mirrors the gear positioning and indication mark position of the opposite side Reassemble and take regular deep breaths as you swear about trying to get those four tiny screws back into the hand grip.  
 

I shouldn't have read this post. UPS are supposed to be delivering my Evo today  This is going to be the jinx on it. In fact I'll probably get the card through the door whilst I'm typing this
 
Thankfully Shitty Link are gone. When they failed to deliver saying they put a card through my door, I had to go pick it up after finding out I had a missed delivery online. Not possible. I was working outside all day and the driver could not have got to my door without seeing me. So no card was put through.
 
At the collection they said I should have brought the card with me??? What fecking card! Then I had the need for a bill or statement with my address on - all my banking and utilities are paperless and online! They argued about a photo ID on my drivers license AND passport that I'd brought. And the final kicker - I should have put my mobile phone number on the package.... wait WTF? Like I sent it to myself!!!

I blame @hagar66
 
Just ordered an ASG Scorpion Evo 3 A1, mags and case from fire-support. The wife will be very surprised about the competition I've just won
 

Actually the Evo is hideously ugly. But I have and M4 and an AK... so now time for Evo.

I blame @hagar66
 
Just ordered an ASG Scorpion Evo 3 A1, mags and case from fire-support. The wife will be very surprised about the competition I've just won
 

Once white paint has dried will package a pair and post.
 

4 weeks to go until I can apply for UKARA. Hope they are running the compo monthly

I blame @hagar66
 
Just ordered an ASG Scorpion Evo 3 A1, mags and case from fire-support. The wife will be very surprised about the competition I've just won
 

Pm me your address and I will find a pair out and stick them in the post. Issue pissed me off no end but other than that best out of box gnu around.