[What have you just 3d printed (for airsoft)]

3 hours ago, Jez_Armstrong said:

 

I can has 😁

The latch or the bolt release or both?

[What have you just 3d printed (for airsoft)]

currently working on a KS-1 using a CYMA as the base.

Designed and printed off the cocking handle latches to match the KS-1 and made the handle ambi.

prototyped the fake bolt release in FDM and the resin version is printing now.

[Gun picture thread]

found a Donor (CYMA) for my KS-1 build. Now the hard part begins, so much to do.

if anyone is interested the plan is:

remove the QD points from the rear of the lower receiver.

chop out the right side bolt release and replace with a 3D modelled correct version.

either find or make the correct fire selectors

engrave both side of the lower

modify the charging handle to be ambi

print a outer barrel sleeve to replicate the dimples on the real thing

Cerakote everything

fit aftermarket parts (rail, grip etc) - still need to find knock off Mbus Pro sights and the stock pipe QD point

I've got a ACRO P2 but need to find the reptilla scope mount and find a suitable short dot that's close to the Vertex 1-10 (not spending £2000 on a scope!)

 

This may take a while.

[TM Glock 17 gen5 mos]

Gen 4 will be released the 12th December. full trades as per the original. Gen 5 will probably happen once this batch is completed and they switch tooling.

https://impulse101.jp/en/gbb/tokyo-marui-glock-17-gen4-gbb-4988

[SVD Build: What do I solder the signal wire to?]

Red wire goes to 1 pole on the trigger along with the red wire from the motor. signal wire goes on the other pole of the trigger. motor Black wire goes to the mosfet and then to the battery

[What have you made?]

The ACR is going to be a tough one to model by the looks of it.

[What have you made?]

7 hours ago, Speedbird_666 said:

The MR-C is structurally complete. Just needs filling, sanding, filling, sanding...etc...then eventually painting.

 

 

 

 

 

 

That's awesome. reminds me of something I'm messing around with currently

[Border Force seized RIF]

I've been through this before. You will need to contact the officer mentioned in the letter and provide your UKARA details, the Public Liability Certificate of the UKARA site and they will also want to see how much you paid for the item which is sometimes different from the invoice attached to the front of the parcel.

[Canik tp9 mag release pin issue]

 

The clip is part of the pin highlighted in re above. Might be easier finding an LCT than a Canik part.

 

Failing that, buy a split pin and modify it to fit.

[Canik tp9 mag release pin issue]

LCT HK53 uses a similar pin on the rear pin for the receiver. What length do you think it is and I'll check the LCT pin to see if it matches.

[Gun picture thread]

I'll throw these in here just so darkmikey99 has something to work on during the colder months

 

[Gun picture thread]

2 hours ago, Darkmikey22 said:

Its not supposed to be a g3k.

The G3A3&4 was in limit use in Northern Ireland. 

However... second pic looks like a hk33..... but is unclear. 

 

However.... the g3k is on my list to do next. 

 

 

 

I think it's a G3

[Maruyama ACP9K GBB]

A new SPC-9 variant has been released.

https://www.octagonairsoft.com/product-page/maruyama-spc-9-pdw-gbb-rifle

[Best aeg out of the box]

Nice little AEG for the price. I wasn't happy with the battery space so made a longer handguard.

[MP5k Boneyard - Trigger Release Question]

The front and back of a K is different from a normal sized MP5. The mag catch should be the same. Hopefully the FS part will fit.

[MP5k Boneyard - Trigger Release Question]

https://www.davescustomairsoft.co.uk/magazine-release-button-for-mp5

 

or drill a hole through the broken part and use a thin bolt and thread lock to make it whole again

[MOA 2024 New stuff from S&T - FG42, SKS, SVT-40 (all AEG booooo)]

well bugger me with a fish fork.

[Gun picture thread]

Tokyo Marui Hk417 redone as a G27K. This took a bit of work but happy with the result.

Parts list:

TM HK417 NGRS with Titan, madbull inner barrel and 4uantum friction pro hop rubber and nub.

Airsoft Artisan G27K handguard

some random front sling loop thing

Ultima industries HLOK side rails (74mm)

2 inch barrel extension as the Airsoft Artisan extension doesn't like the TM threads on the flash hider

TM HK fat grip (I've got a real one here, just need to find it!)

HAO HK curved trigger guard (need to paint)

Ares HK flip up rear sight

Freedom Art Hk417 sling mount

VFC GBB Slim 417 stock heavily modified to fit the TM stock tube and take a lipo.

[Another pistol from novritsch]

I've got my veterans card as I did 13 years in a organisation similar to being in the military, the RAF. If you did 1 day or 22 years the card is worth getting as you can get 1/3 off every train ticket out there for 30 quid a year. 

 

going back to the original post about Novichok, there does seem to be a high number of his airsoft parts in the 2nd hand market which kind of suggests people buy them and aren't exactly happy with their purchase.

[TM MP5SD6 NGRS - Fixed Stock?]

GBB VFC stock will fit but it is tight. CYMA won't fit.

[TM Glock 17 gen5 mos]

If Glock have found a way to force TM to stop producing Glocks then I'd imagine HK will be interested in how they did it as well.

[The 'What have you just bought' Thread]

1 hour ago, Sniper780 said:

Is that a TM AKM gbbr, with  Bakelite Realskin  Magazine and with real steel hand guards?

 

yes

[The 'What have you just bought' Thread]

name the movie

[Gun picture thread]

Star L1A1 with EnglishKiwi 3D printed (SLS) L2A2. Gave the L2 a lick of paint, a couple of labels and a bit of weathering to make it seem a bit aged.

[TM MP5 NGRS Owners]

8 hours ago, Caik said:

How many games have you run with this? Just got it for mine and the batteries are scarily close to the slots. don't want someone getting an actual kill on me by hitting them lol

a couple of games so far. if you are worried about a bb strike then go a bit macgyver and add some black card between the rail and the battery. the card should take the sting out of the bb before it hits the battery.