Leaderboard

Got this beaut as part of a batch of stuff. As far as I can tell its all new, never been touched. No scratches near the moving parts or anything. Ill likely be staring at it lovingly for a day then realising I cant have this much money tied up in a gun, testing it and listing it.

I'm a certified gravy seal I'll have yous know!

Hear is my gun wall I put together with all my Cold War NATO guns. From top to bottom. 1) originally a A&K m240. It's has been converted into a British spec L7a2 GPMG using a blend of real steel parts and custom machined parted and the internals have been replaced with a Daytona gun recoil engine. 2) originally a VFC LAR. Ongoing project, It's being converted into a British/ commonwealth spec l1a1 SLR using a mix of real steel parts and custom machine steel outer barrel and flash eliminator. 3) Vfc M16a1, a recent addition so it's completely bone stock. For now. 3) originally a WE L85A2. It is now a custom built L86A2 that have been put together using a ICS l86 AEG parts and a custom machine outer barrel extension and replica gas piston and gas block. 4) WE L85a2 that is in the process of being converted into a A1 spec replica. Iv machined a A1 clocking handle and I have the a1 front hand guard but I Still need to make a gas block that will allow me to fit the replacement real steel hand guard. The bayonet is a real surplus SA80 one. 5) WE Apache that's got a SLR grip fitted as a fore grip. Not sure what I want to do with replica yet. Probably going to do some sort of operation dynamo SAS type build 6) Originally a WE xm177e1 it's been built to resemble the Car-15 used by Danny archer at the end of the film blood diamond. If you know you know. 7) VFC G3A3. This one is is almost stock. It has an adjustable valve fitted but that's all. I intend to get a nice set of bundeswehr furniture for it. Pistols I'm not a big pistol lover so only got 3 1) WE browning Hi power mk1 2) WE Browning Hi power mk3 3) WE Sig P226 If your reading this thanks for talking the time to read what iv written. I hope you like what iv got to show.

update i needed less than one can for the whole skrim hahaha

The postman arrived while the wife was out... Thank god!! But he delivered an AK12 and a GP25 and as a result there was no explanations needed!!

£40 for a used hop unit! Cowboy traders are back on the forums.😶 (This is a joke, thought it was about time one of us usual moaners featured)

Yeah they're only worth like £100 mate... I'll give you £150 for it though cause I'm a nice guy 😉 One of the few replicas I've wanted forever but never got because of the cost 😂

That Lyndication guy seems proper dodgy, bet he's not even a real seal 🙄

early work in progress of a replacement top slide for the TM FN FNX 45. Externals are basic as I'm more interested in getting the internals sorted first. Might make a Glock style upper for shits & giggles once it's a working prototype.

Don't let his fans hear you say that. Also a former JP adapter owner. Kept wondering why my mags always had a terrible full. Bought a Madbull, now they're great.

MWS mags without the “mod” will fire 120 rounds easy. That is normally a 12-14g fill of gas, easy to work out vs the weight of gas in the can. One can will be plenty for a days play, maybe take two if you are worried. Cutting the silver tube down to cram more liquid propane in is a DUMB idea. Pushing o-rings into the fill valve to prevent the “gas leaking out when filling” is a DUMB idea. The Marui engineers are not dumb.

I've been trying to use them on WE, TM, GM, DE, KJW and WA mags, the fill is always equalising at equivalent to 6g fill, which at best is half a fill, at worst 1/5th of a fill.

TBF , I've got the Jaeger one , purchased this year and it works flawlessly for me.

That's good to know if I ever need to replace my adapter. I'm using a classic Airsoft innovation one that I've had well over 12years.

This applies to like 90% of his shop at this point I swear 😂

Don't buy the jaeger one, it doesn't work. I've had both metal and plastic variants, same problem. It gets too cold and doesn't fill. Bavtac do one which works regardless and is cheaper.

You're welcome bud.

thank you legend thank you legend

Any propane bottles with the map/colmens screw adapter. Don't use camping bottles as alot of these are different fittings. I'm currently using these from tool station https://www.toolstation.com/propane-gas-cylinder/p13125?store=N8&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&gad_source=1&gad_campaignid=17815933861&gclid=Cj0KCQjwrc7GBhCfARIsAHGcW5Xk7p42yEznr3RYJEboyGso6ifsXCJtzfXvAIHQCl8IdGL2jmPJNagaAhBhEALw_wcB Also don't fall for the you have to add silicone oil to your fill valves as this isn't needed and will only fill the whole system with unwanted oil.

k9 plumbing supplies, propane(blue bottles). They sell a 24 bottles package. also, the bavtac adaptor works better and is cheaper. Edit: K9 plumbing supplies frequently have 5% / 7.5% off discount codes, defo subscribe to their Facebook to see when they do. You can get propane for even cheaper. Side note: if you lose the free delivery due to the discount code, just buy 1 extra propane bottle along with the 24 bottle package. For the yellow Mapp bottles, there's mixed reviews on whether they work or not, don't risk it just get the blue ones.

Clearly a retailer selling at that price.

The pin had a stress mark the same width as the hole in the hop unit, still thinking the slide was forced back but I replaced the pin with a new AA one and it's back to working beautifully. There's meant to be a new version of the Staccato P with steel internals etc but I haven't looked into it much, might be a good investment though as it's a nice looking thing 🤔

Don’t think it’s been fixed as yet.

CP: not even once. My weird son had a really good game day yesterday. Handy enough skirmish with, but the range and accuracy of a BASR.

Here's my M4 (Specna Edge), my brother's M16 (Specna Core I think) and my XM177 (E&C). The M4 has a Perun hybrid, 14:1 gears, solid bushings and compression set from Mr Ak2m4, motor is a bit of a mutt I built by putting the armature from a high torque motor into the case of a high torque, high speed one from AliExpress. Barrel is the original brass Specna 6.03 and uses a Macaron 60 hop rubber, omega nub. It shoots like a laser (in Airsoft terms) and has decent range. ROF is about 23rps on 2s I think? The M16 is bone stock and this also shoots fantastically, with decent range too- my brother is going to leave that as is. He has great fun blasting people with the 203 too, usually accompanied by giggling... The XM is my favourite to look at, the trades are fantastic and I love the old school integrated carry handle over the M4's detachable one. It has an upgraded compression set and nozzle, again from ak2m4, and a 6.02 stainless barrel. Hop is the same as the M4. It's running 16:1 gears and I have a Perun hybrid on the way for it. The problem I have with the XM is that it does not shoot as accurately as the M4, I get the odd curler which goes off to the side now and then. I may remove the barrel and try to polish it a bit to see if that helps at all...

Sounds like a brute force & ignorance breakage.

Wanted to make my WE Scar H mags look kinda like Lancer L7AWM’s - found a guy on Reddit who had previously talked about working on one, and got involved with testing it (and suggesting changes/improvements). After about 50 hours total of printing I’ve now got 7 of these done successfully.

The tube exists so you don't overfill it. The better process is to extend the fill valve with 4mm polyurethane tubing (stuff used for pneumatic purposes) and leave the silver tube alone.

MWS system GBBR + pistol(barely needed to be drawn), 2 bottle of ASG green gas can get me through three 3-4 hrs cqb sessions But my habit is mostly just single tap, I almost never finish 3 magazines in one 15-30min session I believe that design has a reason. Some say thecdesign is to ensure there are some space for the liquid gas to expand, and I think it make sense. Since a magazine only holds 35 rounds there is not much point to put more gas in.

How many dead hookers does it take to change a lightbulb? Apparently more than 3 because my cellar is still dark