Gas Guns

Hi all, im having some issues with the cycling of my WE acr gbbr. if you put a fresh mag into the gun and cock it it fires the bb but recoil force is very low,it doesnt cycle back enough to pick up a bb but enough to cock itself, pull the trigger again,gun fires but as theres no bb in the barrel it doesnt shoot a bb,however the recoil is very good, gun cycles enough to load bb and when you pull the trigger bb is shot out but recoil is slow so it doesnt pick bb up. This goes on until mag is empty. gun is clean and oiled. Gas is in the mag. On inspection i cant visibly see anything wrong. ive pulled the bolt appart all seems okay. Any advice would be great.

Hey, does anyone know where I can get hold of a fill valve for the WE f226? Or know of any others that would fit? Any help would be awesome I can't find anywhere, at least in stock.

I bought this TM ages ago, extremely cheap. When I'm shooting the pistol I have to let go of the trigger for it get into a place where it can shoot again. I can't apply any pressure to it if not then I cannot shoot until I let go of it.. Video below PXL_20220618_143525590(0).mp4

Morning All. I am looking to upgrade my pump action gas shotgun to HPA. What do I need on my shopping list to make this a completable task please??

My KWA CZ 75 is venting all the gas in a single trigger pull, I heard that the piston head perishes on KSC/KWA guns, could that be the reason or I am braking up the wrong tree . Thanks in advance.

Hi all, My TM 1911a1 used to drop mags when firing occasionally. However I've just put a metal kit on it and the problem is much worse. I'm using the original springs but it seems the extra weight of the slide moving forward is enough to dislodge the mag, I've tried a guarder mag release but the mags don't lock in at all when using it. Any ideas guys? Thanks

Hi all. New here, but I've searched the forums expecting to find an answer and was surprised not to. I have a couple of 1911 lookalikes (a Well & a BV, nothing expensive, NBB screw-in CO2 bulb holders, not mags, with slim BB mags), both of which appear to have the same internals and the same problem. When you load the CO2 bulb, the gas emptys out the barrel. This isn't the bulb seal, so I guess the vavle/expansion chamber seals have gone on both. Does anyone know where to get replacements? I've dropped one out easy enough, looks to be a simple brass & polythene seal, but I can't seem to find any anywhere on any Airsoft sites? Thanks, …

Hey folks,I'm putting together a kit to take care of and run my gbbr. Trying to find v3 loading nozzles is proving challenging and was wondering if there are any compatible nozzles that will work? Thank you for your time and help

Has anyone ever experienced where your hi capa slide doesn't rack so far back for slide catch to engage at all. I am wondering what is going on right now, I checked my slide plug with recoil spring and it seems that spring is really right to get inside slide plug for the spring. Any way I can sort this out ?

What is the technique for getting that little pin through the trigger and trigger bow? I tried hammering one and it ended up flattening the end before the pin was all the way in.

So I lost one of my hi-capa mags a whgile back and the other one was leaking. I've decided I want to try and fix the leaky mag rather than have to buy a new one, but I can't figure out why it's leaking and I'd rather do that before I start pulling it apart. The co2 leaks from the gas router at the top, not the knocker or where the c02 sits. Would anyone be able to at least point me in the right direction as to why it's leaking and how to fix it? Please ignore/delete. I managed to find a video that explained my issue and how to fix it.

I know that when the mag is removed the trigger will return to the forward position after it has been pulled. Unlike on other TM Glock models. Why is this ? And since WE gen4 Glocks are copies of the gen4 Maruis, I'm assuming that the trigger on the WE Baby Glock works the same way. Is this the case?

Hi guys, new to GHK, but that my new AKM really disappoints me, don't know why the bolt action frequently jamed (either semi or auto). Anyone meets the same problem ?

Am I correct in thinking that the frames and internals of these two guns are identical? Can the slides just be swapped over?

I am on page 213 of the MWS thread and haven’t come across a reference (I don’t think). What does the dynamics precison nozzle valve do if fitted in a stock MWS. Is it a significant jump in fps. I bought some parts second hand and there were 2 brand new in the bottom of the box.

So, I gifted my WE XDM 45 to my littlest brother last year, mostly as a cool paperweight for his PC desk. He has since had me repair the damn thing (I'd have kept it if I realised I could fix it) and now needs some non leaking mags as he's gotten into airsoft too. I've searched online and the original green gas mags for the WE xdm seem to be out of production or at least very scarce, however I have found some co2 magazines for the XDM, from WE. What would ned to be done to make the pistol "safe" or strong enough to use co2? Is it even possible? I'm really starting out with teching GBB stuff, so I apologise if this is a dumb question.

Been thinking about this for a while and would open it up to the hive mind to see if I am on to something or talking cross-eyed badger spit. There are plenty of videos out there where someone fills a mag with gas, but no BBs, and proceed to fire until the bolt or slide won’t lock back. They then proclaim that “tHiS GnU iZ ThE bEsTs bCuZ tWeLfTy tHoUsAnD sHoTs oN oNe MaG” But here is the rub, there is no BB being fired and thus less gas used. Usually the pressure in the barrel due to the BB blocking it keeps the rocket valve open. Once the BB leaves the barrel and the pressure drops the rocket valve can close against the little spring. This diverts …

I have a second hand asg mp9 on the way which comes installed with power down flute valves, i was wondering if there was anywhere i could source stock flute valves, to re increase the fps of the gun, preferably in the uk. Thanks in advance

HI Anyone know where I can buy tag innovations green gas shell launchers? The plastic case that TAG rounds go in to so they can launch? Cheers JOn

Hi! Looking for some input. So I’m using a TM G18C for my next build. Usually I get a metal slide and a metal outer barrel. But this time I’m using a plastic/ carbonfiber slide for the first time. I haven’t decided on the outer barrel yet but would like to get one made of steel or aluminum. Has anyone tried this and experienced any issues? Grateful for any input.

Hey guys, I currently have just bought and mtr with an NPAS installed. From my knowledge I know there is a grub screw in the nozzle which adjusts the position of some internals. Thing is I have fully unscrewed the screw and I think it may have gotten lost as when I was trying to screw it , nothing was there. I have ordered a new screw but without that screw the gun is shooting only 140 fps on .25s where it was shooting 350 before the screw disappeared. What has happened? Because without the screw should the spring for the npas push the little internal all the way to the left causing it to achieve max fps even without the screw. If so, does anyone know why I’m getting only…

See Video. VID20230628222410.mp4 Bought this glock second hand and have had this problem since day 1. Does anyone have any idea what's wrong with my Army Armament GBB Glock 17? So sometimes the slide would stick and gas would come out and I thought that was the issue but I have stripped it down and given it a really good clean then re lubed with silicon gun oil and gun grease (where needed) and put it back together but still having the same issue with gas exploding out after a few shots. I have tried using Abbey predator maintenance gas 144a as it's not as powerful and therefore not as harsh on a plastic GBB like this…

I've just remembered these are a thing, they were seeming a fairly popular RIF at one point (maybe 4-5 years ago?). Now I never even hear anyone mention them. Any owners on the board still enjoying theirs?

I've tried a few different brand mags in the pistol so far and none fit, the closest I got was the raven co2 1911 mag that went roughly 3/4 of the way in. Unfortunately the parkerised mags are out of stock, so just wondering if anybody has the same gun and knows which alternative mags fit it? This is the original mag:

Hello looking for a different sort of setup now for the G18c . cant seem to find a threaded barrel anywhere though any one know? thanks