AlphaBear Posted August 19, 2021 Share Posted August 19, 2021 (edited) 1 hour ago, Druid799 said: Me three ! I do love a bit of TM when I wanna shoot my white load over someone ! 🥴 I hope it’s biodegradable 😂😂😂 Edited August 19, 2021 by AlphaBear Davegolf and Druid799 2 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted August 19, 2021 Supporters Share Posted August 19, 2021 2 hours ago, ImTriggerHappy said: Mate you missed all the best bits because @Jedi_Master the miserable fucker deleted it😜 Well bugger ! 🤬 58 minutes ago, AlphaBear said: I hope it’s biodegradable 😂😂😂 It is , but does leave a sticky residue ! 😬 Link to comment Share on other sites More sharing options...
EvilMonkee Posted August 20, 2021 Share Posted August 20, 2021 On 18/08/2021 at 07:17, Cromulon1994 said: Out the box... I should add. I traded it yesterday for KC02 set up. Someone apparently jumped on my sales post but I never actually saw it. Frankly, the AK is perfectly fine. It has its niggles, such as the wood being plastic, however its biggest issue is Marui not dealing with anyone outside Japan and the magazine supply. I know one airsoft shop was managing to sell spare mags for £120. I told the guy I did the trade with this. It's going to be weeks or even months before more arrive, which is crap. I would, in all honesty, buy an early GHK AKMS given all options, but mates who had a look at this TM were all pleasantly surprised. I would have another, but in 12 months. Mine was perfectly shootable out of the box. My mate hasnt really touched his either and it runs lovely. People fuck with them and then go, oh this is shit....when its their own fault sp00n 1 Link to comment Share on other sites More sharing options...
tokyo-joe Posted August 20, 2021 Share Posted August 20, 2021 Tagging in for news on a short hand guard and folding stock combo. I got a first gen unit and while the recoil is impressive the fake wood is terrible. SBoardley 1 Link to comment Share on other sites More sharing options...
AlphaBear Posted August 23, 2021 Share Posted August 23, 2021 Another chap reviewing the AKM. He's got quite a few videos on his channel.... Link to comment Share on other sites More sharing options...
chrislocho Posted September 12, 2021 Share Posted September 12, 2021 On 15/08/2021 at 04:39, Cromulon1994 said: Mind sharing how you fit the wood stock? Did you modify the protrusion or did you cut into the stock? I've seen someone able to put aftermarket stocks on, wondering how that could be done Link to comment Share on other sites More sharing options...
TadsJ2 Posted September 13, 2021 Share Posted September 13, 2021 (edited) Got an AKM too, I want to upgrade the hop arm to accept omega nub/i-key but i saw that @sp00n is gonna 3d print it - so I am gonna wait for it before trying to file down the og one Also, all the GHK fans just go and create your own thread, yes we know, its not real steel receiver, its not real wood - go and be happy about it in GHK thread and leave us to be happy about our AKM's here Edited September 13, 2021 by TadsJ2 Link to comment Share on other sites More sharing options...
AlphaBear Posted September 13, 2021 Share Posted September 13, 2021 (edited) Anvil Airsoft TV and Clearwater Airsoft did a BIO BB test on various airsoft gnus two of which were the AKM and the MWS. Phil Bucknell of Clearwater Airsoft really likes the AKM and he quoted that it's really growing on him . Oh, the results of the BB test which are interesting too lol Edited September 13, 2021 by AlphaBear TadsJ2 1 Link to comment Share on other sites More sharing options...
TadsJ2 Posted September 13, 2021 Share Posted September 13, 2021 (edited) 7 hours ago, AlphaBear said: Anvil Airsoft TV and Clearwater Airsoft did a BIO BB test on various airsoft gnus two of which were the AKM and the MWS. Phil Bucknell of Clearwater Airsoft really likes the AKM and he quoted that it's really growing on him . Oh, the results of the BB test which interesting too lol Just watched it... And yeah i kinda had the same reaction from guys in my range this sunday... Guys were like - oh its a GBBR AK, noice, what manufacturer - TM - oh, is it that new one? is it real steel? - yes and no - meh not a real steel receiver... not interested, after i fired at the enemy seconds later the same guys that talked to me previously - damn that sounds nice, can i have some test shots - * after firing couple rounds * - damn, thats nice! i got to get one... What i want to say, its really well made, there is no play between parts, no jankyness, everything is smooth, really a quality product so it is easy to be loved, only the hop up arm has to be fixed to accept nubs and it will be shooting heavier bbs no time. Edited September 13, 2021 by TadsJ2 AlphaBear and crimeblitz 2 Link to comment Share on other sites More sharing options...
AlphaBear Posted September 13, 2021 Share Posted September 13, 2021 2 hours ago, TadsJ2 said: no jankyness, everything is smooth That should be an Airsoft patch 😂 TadsJ2 1 Link to comment Share on other sites More sharing options...
gunbod007 Posted September 13, 2021 Share Posted September 13, 2021 I have regrettably sold mine. Just won't get used as often as the MWS but it was very satisfying to shoot. Link to comment Share on other sites More sharing options...
TadsJ2 Posted September 14, 2021 Share Posted September 14, 2021 8 hours ago, gunbod007 said: I have regrettably sold mine. Just won't get used as often as the MWS but it was very satisfying to shoot. I will probably have to sell sth in my collection as well but not gbbr's Link to comment Share on other sites More sharing options...
TadsJ2 Posted September 14, 2021 Share Posted September 14, 2021 (edited) So, first diy "mod" that you can do and gives me great performance - and doesnt include filing of hop up arm I've found an easy fix for hop up arm not being able to accept nubs - just make the nub fit What I did - i took a hollow round shaped AEG nub (pretty much the same as TM MWS stock nub, but softer rubber) and cut it in half and i've put it inside my hop up arm -> since it fits perfectly inside the round shaped compartment of the hop-up arm -> it applies more consistent and stronger pressure on my 2021 Decepticon 60o -> I am now perfectly hopping 0.36g bbs with hop up set on 5/8. Its probably not the best solution - i think it would be better to fill in the rounded compartment of the hop up arm with something like omega nub rubber cut to the size, if you would do it neatly it would act as omega nub itself and give a flat pressure on the hop up rubber. Gonna give it a try. EDIT: So with omega nub cut to the size it hops 0.4 g bbs with ease, but there is another issue, its really hard to get for it to consistently hop lighter bbs as this combination is too stiff Gonna go back to aeg nub since i wont be playing with more than 0.3g With omega nub cut to size AEG nub cut to half, along side is the TM MWS stock nub With aeg nub inside hop up arm Now this is probably not the best of the solutions and aftermarket (or filing it down) should make it even better but it is a great solution until aftermarket becomes available and it is light on your wallet Edited September 14, 2021 by TadsJ2 Link to comment Share on other sites More sharing options...
Supporters sp00n Posted September 21, 2021 Author Supporters Share Posted September 21, 2021 Well my initial plan of making a 3d printed hop wheel won’t work, as it’s pretty maxed out atm. I have not had the time to design a better arm, but I am gunna try a cheap fix …. I cut some electric tape and put it over the hop arm around 6 layers, then trimmed it to suit … no idea if it’s gunna work and not had chance to test it yet … hopefully gunna get some range time soon Link to comment Share on other sites More sharing options...
Supporters sp00n Posted September 22, 2021 Author Supporters Share Posted September 22, 2021 Tested the hop tape mod, and it hopped .36’s fine on its lowest setting. I didn’t have any other bb’s to test different weights etc. now I just need to drop the FPS down from 275 to below 260 Link to comment Share on other sites More sharing options...
TadsJ2 Posted September 30, 2021 Share Posted September 30, 2021 Did this to my AKM Lucros 1 Link to comment Share on other sites More sharing options...
sjhirst Posted October 2, 2021 Share Posted October 2, 2021 (edited) Hey folks, I'm hoping to get the AK shortly, but its firing at 1.1 Joules Here in N.Ireland we have a 1J limit. Is there a mod or anything to reduce the fps available or will be out shortly? Thanks Edited October 2, 2021 by sjhirst Link to comment Share on other sites More sharing options...
Supporters sp00n Posted October 3, 2021 Author Supporters Share Posted October 3, 2021 I have ordered a blowmaster low power rocket valve, no idea what it’s like etc as it coming from Hong Kong. I am gunna try and use that to get mine under when using .36’s was too hot at last chrono Link to comment Share on other sites More sharing options...
sjhirst Posted October 3, 2021 Share Posted October 3, 2021 ah right, cheers. Yes, saw Ollie mention Bowmaster and didn't realise there was other items! as it is, the deal fell through on the used one i was looking to buy Link to comment Share on other sites More sharing options...
SBoardley Posted October 16, 2021 Share Posted October 16, 2021 Not trying to start (another) argument, but I was looking at the nuance between 47 & 74 gas blocks the other day. What I noticed is that the Tm akm gas block looks , well … wrong? They seem to have straightened it. Traditional 47 has a curved front to the 45 degree sweep, as opposed to the 90 degree 74. Anyone else noticed this? Link to comment Share on other sites More sharing options...
SBoardley Posted November 7, 2021 Share Posted November 7, 2021 If anyone is interested, saw this on YouTube the other day and thought of you guys…. It’s a start…https://www.octagonairsoft.com/product-page/fcw-marui-akm-gbbr-nylon-m4-tube-adapter-set-1 Link to comment Share on other sites More sharing options...
Lucros Posted November 16, 2021 Share Posted November 16, 2021 Hello! I just ordered my AKM a few days ago, and was trying to pick a new barrel but am getting alot of somewhat conflicting information. I would like to be in the 380-400 (1.5ishJ) range and was considering a crazy jet and the 370mm laylax mws barrel (6.03), opinions and suggestions welcomed and wanted lol I was also looking at the 60 silicone Mr Hop amd the 70 silicone autobot for buckings Link to comment Share on other sites More sharing options...
Lucros Posted November 17, 2021 Share Posted November 17, 2021 On 30/09/2021 at 01:58, TadsJ2 said: Did this to my AKM Please enlighten me as to what parts and how you fit them lol Link to comment Share on other sites More sharing options...
GREG_BURTON Posted January 10, 2022 Share Posted January 10, 2022 Here is mine currently. Just waiting on the new pistol grip to arrive. Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted January 10, 2022 Share Posted January 10, 2022 Holy balls that hand guard really changed the AK profile. Looks good! Got a parts list for the externals? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now