Wo1f Posted October 13, 2019 Author Posted October 13, 2019 2 hours ago, EvilMonkee said: What weight ammo for stock? Also which way is more hop on the wheel? Think its towards me? heaviest you can hop. I found that to be a .28 but I've heard people saying they can hop heavier on newer ones. Start with some good quality .28's and if you can over hop them move to .30's
Mostly Retired Moderators L3wisD Posted October 13, 2019 Mostly Retired Moderators Posted October 13, 2019 21 hours ago, EvilMonkee said: Trying to hunt down some mags. Apparently Fire Support will have some in shortly Dave's custom airsoft has ten in stock: https://www.davescustomairsoft.co.uk/MWSMagazine?search=Mws
EvilMonkee Posted October 13, 2019 Posted October 13, 2019 9 minutes ago, L3wisD said: Dave's custom airsoft has ten in stock: https://www.davescustomairsoft.co.uk/MWSMagazine?search=Mws 7 in stock ? Seems to be able to lift .3s so will use them. Tbh the difference between a 28 and .3 is minor Sawyer 1
Sawyer Posted October 13, 2019 Posted October 13, 2019 8 minutes ago, EvilMonkee said: 7 in stock ? Seems to be able to lift .3s so will use them. Tbh the difference between a 28 and .3 is minor 5 EvilMonkee 1
DopeYourScope Posted October 13, 2019 Posted October 13, 2019 I also found .28s to be heaviest I could use. in reference to the 416 discussion; now that GHK have released their MK18 do we reckon that will push TM to make another Zet based AR?
Reapur Posted October 13, 2019 Posted October 13, 2019 I don't think TM gets influenced by anyone. They do their own thing and usually do it right.
hunter511 Posted October 13, 2019 Posted October 13, 2019 Just run my CQB upper today for the first time, on .25s with a gunsmodify hop set up, modify tan rubber and laylax arm (built up from scratch) it's impressive range and accuracy wise beebs were going straight like lasers and point of aim was basically point of impact at CQB ranges. The fps consistancy is a bit here and there (not bedded in yet tbh at this point a total of 12 mags through it) but I'm willing to attribute that to the site chrono as otherwise my 416C has magically lost 50fps since last being checked........ I did however find the bolt cycle "lazy" particularly the return stroke into battery, its a stock MTR lower with a stock bolt, weather was 16degrees c and gas was 144a. is it worth looking at a lightweight bolt carrier for the winter months and if so whats the recommneded option?
Whisky1 Posted October 13, 2019 Posted October 13, 2019 31 minutes ago, hunter511 said: Just run my CQB upper today for the first time, on .25s with a gunsmodify hop set up, modify tan rubber and laylax arm (built up from scratch) it's impressive range and accuracy wise beebs were going straight like lasers and point of aim was basically point of impact at CQB ranges. The fps consistancy is a bit here and there (not bedded in yet tbh at this point a total of 12 mags through it) but I'm willing to attribute that to the site chrono as otherwise my 416C has magically lost 50fps since last being checked........ I did however find the bolt cycle "lazy" particularly the return stroke into battery, its a stock MTR lower with a stock bolt, weather was 16degrees c and gas was 144a. is it worth looking at a lightweight bolt carrier for the winter months and if so whats the recommneded option? Go lightweight BCG and green gas should be snappy then.
hunter511 Posted October 13, 2019 Posted October 13, 2019 Uggg Was hoping to avoid the green gas mod. felt like it was more the return stage of the cycle than the initial recoil. meh.
Reapur Posted October 13, 2019 Posted October 13, 2019 Increased power and more gas capacity? Sounds like a win win to me. Just don't cut the tube TOO short, you'll get a lot of liquid coming out of the nozzle. Leave the outer tube about 5-6mm above the actual fill tube on the valve.
EvilMonkee Posted October 13, 2019 Posted October 13, 2019 Read somewhere that they arent compatible with real spec stocks? This true? Will this fit? https://www.fire-support.co.uk/product/magpul-real-moe-carbine-stock---mil-spec-black
Guest Yukarin Posted October 13, 2019 Posted October 13, 2019 1 hour ago, EvilMonkee said: Read somewhere that they arent compatible with real spec stocks? This true? Will this fit? https://www.fire-support.co.uk/product/magpul-real-moe-carbine-stock---mil-spec-black Buffer tube is commercial size which is slightly smaller than mil spec, stock will fit with a bit of wobble. Unless you shim the buffer tube with a bit of tape. Edit: Brain died and got mixed up between sizes for commerical and mil spec, ignore me.
Reapur Posted October 13, 2019 Posted October 13, 2019 33 minutes ago, UKCYukarin said: Buffer tube is commercial size which is slightly smaller than mil spec, stock will fit with a bit of wobble. Unless you shim the buffer tube with a bit of tape. This is not true. The stock is milspec. I installed a Magpul MOE adjustable stock and has zero wobble or need to shim. Upgraded the buffer tube to the angry gun milspec sized one also and stock has same fitment. sabaka 1
Guest Yukarin Posted October 13, 2019 Posted October 13, 2019 2 minutes ago, Reapur said: This is not true. The stock is milspec. I installed a Magpul MOE adjustable stock and has zero wobble or need to shim. Upgraded the buffer tube to the angry gun milspec sized one also and stock has same fitment. I also have a Magpul MOE stock, I needed to shim my buffer tube to eliminate wobble. Edit: Brain died and got mixed up between sizes for commerical and mil spec, ignore me. Turns out my Magpul stock was commerical spec.
Wo1f Posted October 14, 2019 Author Posted October 14, 2019 Mws is supposed to be delivered today and I might have to night out at work?. on a brighter note.. a small fortune spent at redwolf so at least she’ll be pretty Sawyer 1
RossF Posted October 14, 2019 Posted October 14, 2019 8 hours ago, Reapur said: This is not true. The stock is milspec. I installed a Magpul MOE adjustable stock and has zero wobble or need to shim. Upgraded the buffer tube to the angry gun milspec sized one also and stock has same fitment. I had this question too. I’ve stuck to a “for MWS” g&p stock but would like to know my options preferably without shimming with tape.
DopeYourScope Posted October 14, 2019 Posted October 14, 2019 I thought it was stocks were milspec but pistol grips are commercial? Or am I talking out of my arse?
EvilMonkee Posted October 14, 2019 Posted October 14, 2019 So basically noone knows LOL Comedy aside so it looks like that Magpul stock should fit?
Davegolf Posted October 14, 2019 Posted October 14, 2019 Stocks = MILSPEC Grips = STANDARD AR RossF, Sawyer and EvilMonkee 3
Wo1f Posted October 14, 2019 Author Posted October 14, 2019 As above. They’re Mil-Spec dimensions, just a shit 2 piece design. Grips are RS/gbbr grips
Pappahog41 Posted October 14, 2019 Posted October 14, 2019 hi gents, ive recently purchased a MTR16, will the MWS mags fit it? as finding 35rd mags is almost impossible. thanks
Wo1f Posted October 14, 2019 Author Posted October 14, 2019 The 35 round mws mags and the 20 round mtr mags are interchangeable
EvilMonkee Posted October 15, 2019 Posted October 15, 2019 18 hours ago, Pappahog41 said: hi gents, ive recently purchased a MTR16, will the MWS mags fit it? as finding 35rd mags is almost impossible. thanks Leave it a week or so and Fire Support will be getting some in - 72 if I recall correctly. Alternatively, Daves Custom Airsoft had a few left Pappahog41 1
DopeYourScope Posted October 15, 2019 Posted October 15, 2019 35 minutes ago, EvilMonkee said: Leave it a week or so and Fire Support will be getting some in - 72 if I recall correctly. Alternatively, Daves Custom Airsoft had a few left I’ve emailed defcon again asking if they’re due any otherwise I think I’ll cancel my order with them and then order from Fire Support.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now