Supporters Monty Posted April 25, 2014 Supporters Share Posted April 25, 2014 Just need a rail system... Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted April 25, 2014 Supporters Share Posted April 25, 2014 Everyone starting out with an AR with plastic handguards says that, then the reality hits that quad rails are very heavy and the facilitate the adding of even more weight to the area of the gun where additional weight makes your arm hurt and detriments 'pointability'. Haven't bought a quad rail myself in... at least 2 years, maybe 3 or more. I mean if you want one that genuinely is entirely your choice and it's airsoft so go for it, just passing on some experience. I'd recommend putting the rail budget in to something like hydro dipping the gun/parts thereof, or some other handguard that doesn't have a rail on all 4 sides. The real MOE set can be had for less than a lot of dodgy ACM RAS sets and far less than a high quality airsoft rail. Same amount of attachment options if not more, less weight, better integration with VFGs. Ideally wait for the new MOE Slimline handguard to get to the UK, shouldn't be that long and then you'll be right on the cutting edge (seeing as they were literally just announced). Monty 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 26, 2014 Supporters Share Posted April 26, 2014 I'd have thought the link between inertia and accuracy was obvious, Cap'n, but whatever... the plain fact of the matter is that the German 20mm cannon was a very effective weapon and whilst they may well have stripped the armour off it in latter production, that doesn't mean that it wasn't useful ,or even that the gun wasn't better with it. The Germans did have bigger fish to fry at the time, after all. Link to comment Share on other sites More sharing options...
Guest PT247 Posted April 26, 2014 Share Posted April 26, 2014 the home made airsoft version above is very cool tho, even if it isn't an exact replica, it still looks bloody effective! :-) Link to comment Share on other sites More sharing options...
remus Posted April 26, 2014 Share Posted April 26, 2014 ^^Needs an AK, methinks... i intend to at some point get an ak and a g36 at some point. think a new pistol is higer in priority though atm... Link to comment Share on other sites More sharing options...
Supporters Monty Posted April 26, 2014 Supporters Share Posted April 26, 2014 I do have a set of MOE rails, so I'll go with that. My previous M4 (S-System) felt like the front end was made from led, it was ridiculously heavy. Do you know when the hand guards come out? Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted April 26, 2014 Supporters Share Posted April 26, 2014 I do have a set of MOE rails, so I'll go with that. My previous M4 (S-System) felt like the front end was made from led, it was ridiculously heavy. Do you know when the hand guards come out? They only just popped up in the states, probably a couple of months until they make it to the RS retailers over here I'd say. The 2 main places to keep an eye on/enquire with are Lantac and Arc Precision, although a lot of airsoft retailers here and in HK have been stocking RS magpul stuff since PTS lost the license. Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 26, 2014 Share Posted April 26, 2014 Put a Magpul hand guard on it, you can get attachments that fix straight in to the existing apertures on it or fix rails on where they are needed. Plus you get to keep the battery in there. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted April 26, 2014 Supporters Share Posted April 26, 2014 Just the front end of the 14.5" Avalon BCM gun. Waiting on a chance to take full shots. CaptainSwoop, murph, Monty and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Monty Posted April 27, 2014 Supporters Share Posted April 27, 2014 Put a Magpul hand guard on it, Where did you get your Magpul hanguard? Been looking around on ebay for one but I'm not sure if they're going to be PTW spec or AEG spec. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted April 27, 2014 Supporters Share Posted April 27, 2014 Maybe I'm mis-understanding the question, but there shouldn't be any difference. The PTW is built to real AR dimensions and I've fitted PTS and RS MOE handguards to AEGs, EBB and GBB rifles, never had any problems. Shouldn't be any reason for there to even be two different specs on sale. Link to comment Share on other sites More sharing options...
Supporters Monty Posted April 27, 2014 Supporters Share Posted April 27, 2014 Maybe I'm mis-understanding the question, but there shouldn't be any difference. The PTW is built to real AR dimensions and I've fitted PTS and RS MOE handguards to AEGs, EBB and GBB rifles, never had any problems. Shouldn't be any reason for there to even be two different specs on sale. I was aware that AEG spec M4's are slightly fatter than PTW's? Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted April 27, 2014 Supporters Share Posted April 27, 2014 The receivers are a bit wider in some ways, that doesn't affect the specs of the barrel nut or handguard cap though (those being the parts which dictate fitting of plastic handguards). Like I say I've fitted RS MOE handguards to various electric guns no problem. Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 27, 2014 Share Posted April 27, 2014 Same here. I just got the lowest priced one off Ebay Link to comment Share on other sites More sharing options...
Supporters Monty Posted April 27, 2014 Supporters Share Posted April 27, 2014 The receivers are a bit wider in some ways, that doesn't affect the specs of the barrel nut or handguard cap though (those being the parts which dictate fitting of plastic handguards). Like I say I've fitted RS MOE handguards to various electric guns no problem. Cool, thanks for the info! Link to comment Share on other sites More sharing options...
cropzy Posted April 27, 2014 Share Posted April 27, 2014 2 Crappy pics of a DW 2'' C02 I picked up today for £60 Going to upload proper pics of my UMP and DW later on when I can have proper time. Airsoft_Mr B and Monty 2 Link to comment Share on other sites More sharing options...
Mack Posted April 28, 2014 Share Posted April 28, 2014 Scar H arrived Airsoft_Mr B and Monty 2 Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 28, 2014 Share Posted April 28, 2014 What sight is that? Link to comment Share on other sites More sharing options...
Supporters Lozart Posted April 28, 2014 Supporters Share Posted April 28, 2014 What sight is that? That'll be an Elcan Spectre. Possibly a Spectre DR if it's the variable zoom. Link to comment Share on other sites More sharing options...
Mack Posted April 28, 2014 Share Posted April 28, 2014 As above, Elcan Spectre Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 6, 2014 Supporters Share Posted May 6, 2014 my M4A1 SOPMOD Block 2 is very nearly complete: perfectly skirmishable as it is, but I'd ideally like to stick a decent functional PEQ 15 on there and maybe a torch too. TacMaster and Monty 2 Link to comment Share on other sites More sharing options...
Supporters Popular Post TheFull9 Posted May 7, 2014 Supporters Popular Post Share Posted May 7, 2014 And now for something completely different. Lozart, Airsoft_Mr B, DEF and 5 others 8 Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 7, 2014 Supporters Share Posted May 7, 2014 Oh god, it's hideous. I'm a little bit saddened that you can buy rail ladders in hot pink! Ian_Gere and TacMaster 2 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted May 7, 2014 Supporters Share Posted May 7, 2014 Dude, everyone knows that all the worlds elite paint their guns yellow now. The Leprechaun!, CaptainSwoop and Ian_Gere 3 Link to comment Share on other sites More sharing options...
cropzy Posted May 7, 2014 Share Posted May 7, 2014 I actually really like it. I really like stuff like this too. two_zero, TheFull9, Caliber and 1 other 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now