Mack Posted February 26, 2014 Share Posted February 26, 2014 Got a bit trigger happy with a can of bronze paint image url two_zero 1 Link to comment Share on other sites More sharing options...
Supporters Nutster Posted February 27, 2014 Supporters Share Posted February 27, 2014 Bit too shiny? Or is it just the picture Link to comment Share on other sites More sharing options...
Mack Posted February 27, 2014 Share Posted February 27, 2014 It is pretty shiny, may give it a buff with some sandpaper to tone it back a bit. Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted February 27, 2014 Share Posted February 27, 2014 Monty 1 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted February 27, 2014 Share Posted February 27, 2014 My CQB-R M4 + Palco NBB USP khaki frame (needs new mag) As you can see from my signature pic, I have plans to upgrade this externally, including a box set of 8 mid-caps from MAG. Bought the MAGPUL MOE PTS carbine handguard but it's in Foliage Green so I might re-paint it at some point. Link to comment Share on other sites More sharing options...
Sako Posted February 28, 2014 Share Posted February 28, 2014 My KA S&W M&P15 MOE Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
CaptainSwoop Posted February 28, 2014 Share Posted February 28, 2014 that's pretty Airsoft_Mr B and Sako 2 Link to comment Share on other sites More sharing options...
toothpick-NL Posted February 28, 2014 Share Posted February 28, 2014 Problem with that is UK forces don't use the LSW as a supporting weapon in a conventional sense- it's only useful for range support as the barrel is fixed, so if you start spraying rounds in long bursts without giving it a chance to cool the barrel will warp and accuracy will decrease. That's why they patrol with Minimis and GPMGs. i know it. i was a MAG gunner at the dutch army. that gun also has 2 barrels because of heat and because of runout from fire-ing Link to comment Share on other sites More sharing options...
TacMaster Posted March 2, 2014 Share Posted March 2, 2014 Got given a free RIS handguard by a mate. I've got the battery jury rigged to the outside until I can afford a fake PEQ box: Link to comment Share on other sites More sharing options...
Guest PT247 Posted March 2, 2014 Share Posted March 2, 2014 If you have an old canvas pistol magazine pouch try that for size mate Link to comment Share on other sites More sharing options...
TacMaster Posted March 2, 2014 Share Posted March 2, 2014 If you have an old canvas pistol magazine pouch try that for size mate I have an Osprey MK4 pistol mag pouch- how should I fix it on? Rubber bands? Link to comment Share on other sites More sharing options...
AirsoftTed Posted March 2, 2014 Share Posted March 2, 2014 Got given a free RIS handguard by a mate. I've got the battery jury rigged to the outside until I can afford a fake PEQ box: Thats pretty clever and tidy looking tbf mate, I'm a thick c*nt so gave up with mine thinking I'd have to rear wire it which would involve new stocktubes etc. lol Did you have any trouble getting the RIS on? I couldn't for the life of me get one on my G&G because of the front sight block, I might pick up a cheap one and try again, what make is yours? Link to comment Share on other sites More sharing options...
Guest PT247 Posted March 2, 2014 Share Posted March 2, 2014 I have an Osprey MK4 pistol mag pouch- how should I fix it on? Rubber bands? You could try rubber bands, or if ya got a sister/long hair you could try a couple of black hair bands which would be a lil more subtle Link to comment Share on other sites More sharing options...
TacMaster Posted March 2, 2014 Share Posted March 2, 2014 Thats pretty clever and tidy looking tbf mate, I'm a thick c*nt so gave up with mine thinking I'd have to rear wire it which would involve new stocktubes etc. lol Did you have any trouble getting the RIS on? I couldn't for the life of me get one on my G&G because of the front sight block, I might pick up a cheap one and try again, what make is yours? I have no idea about the make, it took a little while figuring out the fit as you need to push the second smaller part to it down to fit in the D ring gear. It's a pretty weird product though; it comes in 2 parts. One part has 3 rails and the other has 1- they slot together very tightly, I had to file the fuse holder down to get it into the gap between the outer barrel and the first hand guard part. It looks a little like this, just without the markings and the hex screws: Link to comment Share on other sites More sharing options...
AirsoftTed Posted March 2, 2014 Share Posted March 2, 2014 Aye, it was the same type I've had before, barring this had a little swingy trap doory thing on the inside which kept getting in the way. Least I know theres a way now, so I'm going to give it a try with a new one, if not I'm shelling out for a G&P (any excuse). Cheers mate! Link to comment Share on other sites More sharing options...
Supporters Popular Post TheFull9 Posted March 2, 2014 Supporters Popular Post Share Posted March 2, 2014 Grab a Lipo? Plenty of those that'll fit inside a KAC RAS replica without breaking a sweat. No jury rigging required, no fake PEQ box or anything else like that. If you've got to make do with what you have that's absolutely fine don't get me wrong, but NiCd & NiMh are the battery equivalent of a VHS tape. CaptainSwoop, Unrustle_Thine_Jimmies, jcheeseright and 5 others 8 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted March 3, 2014 Supporters Share Posted March 3, 2014 Black cable ties might help in the meantime, Tac. Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
TacMaster Posted March 4, 2014 Share Posted March 4, 2014 Yeah I'm ordering a 7.4v 25c LiPo w/mini tamiya connector and charger from componentshop soon, should fit inside the Ris. Monty, TheFull9 and Ian_Gere 3 Link to comment Share on other sites More sharing options...
Supporters M_P Posted March 4, 2014 Author Supporters Share Posted March 4, 2014 It's worth getting some deans connectors and swapping out the tamiyas too. Ian_Gere 1 Link to comment Share on other sites More sharing options...
CaptainSwoop Posted March 4, 2014 Share Posted March 4, 2014 Black Cable ties always help Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 4, 2014 Supporters Share Posted March 4, 2014 Black Cable ties always help You know what they say - there's no problem in the world that can't be solved with cable ties, gaffa tape or explosives. Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted March 4, 2014 Supporters Share Posted March 4, 2014 You know what they say - there's no problem in the world that can't be solved with cable ties, gaffa tape or explosives. Missed out WD-40... Link to comment Share on other sites More sharing options...
CaptainSwoop Posted March 4, 2014 Share Posted March 4, 2014 WD-40 is good as a fish bait. Carp and Chub go mad for the smell of it. Link to comment Share on other sites More sharing options...
Nickona Posted March 4, 2014 Share Posted March 4, 2014 Here a picture of Widecard's, ZuluSix, TM Recoil SCAR-H To see more up and coming pictures of the team's it check out the FTZ Facebook page: https://www.facebook.com/fireteamzuluairsoft TacMaster 1 Link to comment Share on other sites More sharing options...
TacMaster Posted March 4, 2014 Share Posted March 4, 2014 It's worth getting some deans connectors and swapping out the tamiyas too. I've got deans already installed in my M4, the gun came with a deans-tamiya adaptor, so I'm fine for anything from that end. Componentshop offer deans on their batteries with installation for £1 so I'll get it ordered with that option ticked. (not sure about the difference aside from appearance however if you guys recommend them, I'll take it ) Oh yeah is this charger any good? 700mA Charger for 1S to 3S (3.7 / 7.4 / 11.1V) Li-Po and LiFe battery packs Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now