Supporters Nutster Posted June 14, 2013 Supporters Share Posted June 14, 2013 Not bad just needs a dirty paint job Link to comment Share on other sites More sharing options...
Mack Posted June 14, 2013 Share Posted June 14, 2013 Id love a dusted paint job on it I just dont have the cajones to do it Not bad just needs a dirty paint job Link to comment Share on other sites More sharing options...
Supporters Monty Posted June 14, 2013 Supporters Share Posted June 14, 2013 My Marui's. M16's a bit creaky, but it works. Link to comment Share on other sites More sharing options...
AirsoftTed Posted June 16, 2013 Share Posted June 16, 2013 G&P M16A3 G&G CM16 carbine Monty 1 Link to comment Share on other sites More sharing options...
Ragemelon Posted June 16, 2013 Share Posted June 16, 2013 Picture 004.jpg Ooooh, is that a penny? The Leprechaun!, Monty and Dan_W 3 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted June 17, 2013 Supporters Share Posted June 17, 2013 So here's the LM4 I picked up last December, finally managed to get 95% of the parts I wanted together along with all the necessary tools. Took this just as I finished rethreading the upper in order to fit the Midwest Industries tube. Just need to get a light mount and finish work on the bolt catch to fit the BAD and it'll be 100%. SheriffHD and Shinobi 2 Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted June 18, 2013 Supporters Share Posted June 18, 2013 oooh, going down the GBB route, let me know how it does for general skirmishing; I'm completely in love with my MP7 GBB but reticent to pick up a larger rifle for reasons unknown to even myself! Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted June 18, 2013 Supporters Share Posted June 18, 2013 Well I've owned the LM4 for about 6 months now, not really used it apart from a bit of plinking but the magazines have no issues at all staying gas tight. Unlike the 11 x G&P WOC mags I owned for about 2 years before switching over to the KWA platform, which were nothing but an enormous splooging of money down the drain, every single one. The good thing KWA did with their rifle is look at the various systems already on the market and properly think about which areas need to be beefed up/altered and parts made of decent steel. I believe It's the newest of all the GBB AR-15s (possibly excluding the weird new G&G that's rather unrealistic), and it really shows. Soon as I take it to a game I'll let you know how it performs. Link to comment Share on other sites More sharing options...
SheriffHD Posted June 19, 2013 Share Posted June 19, 2013 Well, new pistol came yesterday, and new paints came today. So as I started to sand down the slide, I noticed how fucking awesome it made the gun look. Half tempted to just keep it like this. Edit: Repainted it all now, I think the worn look was nice. But the black/gray two tone is better. Hubert, Shinobi, Monty and 1 other 4 Link to comment Share on other sites More sharing options...
Black Death Posted June 20, 2013 Share Posted June 20, 2013 Well, new pistol came yesterday, and new paints came today. So as I started to sand down the slide, I noticed how fucking awesome it made the gun look. Half tempted to just keep it like this. Edit: Repainted it all now, I think the worn look was nice. But the black/gray two tone is better. me likey very much Link to comment Share on other sites More sharing options...
SheriffHD Posted June 20, 2013 Share Posted June 20, 2013 I just noticed your forum signature "I shot the sheriff" I have a feeling if I see you at a game you will be singing that every time you get me. Link to comment Share on other sites More sharing options...
shaw3029 Posted June 24, 2013 Share Posted June 24, 2013 Loving the paint job on the pistol. Very nice. Did a little work on my TR4, Not the best photo I know and I've still a couple more bits to add. Just having a little trouble with the gas tube now that I've removed the front post sight. Shinobi 1 Link to comment Share on other sites More sharing options...
Supporters Nutster Posted June 24, 2013 Supporters Share Posted June 24, 2013 Re the gas tube, you can either remove the tube altogether or get yourself a low pro gas block of some description shaw3029 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted June 24, 2013 Supporters Share Posted June 24, 2013 Looks like a standard carbine length 7" handguard, the standard A-frame block/sight should go back on there no trouble theoretically. Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted June 24, 2013 Supporters Share Posted June 24, 2013 seconded, would remove the need for that lonely MBUS you've got up front there too! Link to comment Share on other sites More sharing options...
Supporters TPI Posted June 25, 2013 Supporters Share Posted June 25, 2013 My ICS L85A2 & KWA Glock 19 I Didn't want the L85 to look too British Military, You may Remember that Brief Chat Ed: so i Stuck the wrong FH on (From an M4 i think?) Avoided the Grip Pod (Regretably I'm considering getting one ) said no Thanks to the Light/Laser Block and stuck an Ultrafire on (It's second hand & Obviously a Clone of something but i cannot put my finger on what for just now) Next Steps are: Machine a Couple of Mounts to put a Dr Red dot on the Elcan (Variable Zoom i may Add!) some of those Fancy looking MagPul XTM's (Black & OD) Obviously a new Torch Mount Grip pod (OD if i can find one if not Black will do) The Glock 19 is Painted By our Very Own Junior in a Green Multicam, It's Rocking a Standard Glock Front sight and a Fi Dragon Green Rear Sight Next Steps Are: +1 Mag to make 3 Crye Precision Gun Clip (Tan) Streamlight TLR1 (i think their called?) Custom Machined Muzzle Break attachment (Like the Zombat but for a Glock and allowing the TLR to still mount on) and then it will go back to Sam to be repainted in a Green MC again and yes It IS Engineered to be Different for now.. (I can hear Optimus Prime doing the speech at the end of Transformers1 in my head and i've only seen it 3 times!) SheriffHD 1 Link to comment Share on other sites More sharing options...
SheriffHD Posted June 25, 2013 Share Posted June 25, 2013 to be honest, Its hard not to make a L85 look british. It isnt a gun you would see a PMC use, and you wouldnt expect to see naked generals in libera use em either. Its about as british as crumpets Im afraid. adam bussey 1 Link to comment Share on other sites More sharing options...
shaw3029 Posted June 25, 2013 Share Posted June 25, 2013 Cheers guys. I'm going to get myself a gas block. Il post some pictures up when I'm done. Thanks. Link to comment Share on other sites More sharing options...
SimonQuigley Posted June 25, 2013 Share Posted June 25, 2013 Just finished pimping my Dboys M4. pics to come Link to comment Share on other sites More sharing options...
Zak Da Mack Posted July 11, 2013 Share Posted July 11, 2013 So, now that school has finally finished, I decided to get off my arse and tape the stock of my rifle in Flecktarn. It looks sooo much better now. (note: I sheared off the front screw by accident a while ago, so the paracord at the front is holding it at the front.) The scope also needs redoing. Bottledtorment 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted July 11, 2013 Supporters Share Posted July 11, 2013 That's impressive^ for tape. The flecktarn stuff is so much better than the woodland, but regardless, you've done a good job with it. Link to comment Share on other sites More sharing options...
Zak Da Mack Posted July 11, 2013 Share Posted July 11, 2013 That's impressive^ for tape. The flecktarn stuff is so much better than the woodland, but regardless, you've done a good job with it. Thanks, I think because the camouflage is 6 dot and not striped, it doesn't cut off suddenly and so, it looks a lot better. Airsoft-Ed 1 Link to comment Share on other sites More sharing options...
Sam_G Posted July 12, 2013 Share Posted July 12, 2013 oooooo new optics!!!!!!! Going for a copy of the M4s used by the PJs in "inside combat Rescue" The 551 is already painted to match the gun. But unsure if i should paint the magnifier as i can use it on the SCAR as well as that has a 552. Link to comment Share on other sites More sharing options...
fivezerothree Posted July 12, 2013 Share Posted July 12, 2013 Here's mine! It's a tad on the basic side given it's my first but I put in a little effort with the SLR. Everyone seems to ask although I thought it was obvious. It's a real Aimpoint which is my only Gucci. Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted July 12, 2013 Supporters Share Posted July 12, 2013 Real aimpoint and a high cap mag :-( Ian_Gere and Shinobi 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now