Supporters Popular Post TheFull9 Posted December 30, 2014 Supporters Popular Post Posted December 30, 2014 Thread title says it. Built myself a pistol rack out of some cheap wood last week, much better solution than I had before (i.e. all the handguns just sort of crammed haphazardly next to some other gear on a shelf). Josh95, Monty, Mack and 4 others 7
Adam3088 Posted December 30, 2014 Posted December 30, 2014 Bloody hell that's a lot of pistols! Looks good though. My guns are all in those cheapo Swiss arms carry cases which are then left at the bottom of my wardrobe, would like to have something better to keep them in but lacking space. Airsoft_Mr B and TheFull9 2
straffham Posted December 30, 2014 Posted December 30, 2014 Thread title says it. Built myself a pistol rack out of some cheap wood last week, much better solution than I had before (i.e. all the handguns just sort of crammed haphazardly next to some other gear on a shelf). Nice job! Nice collection too. TheFull9 and cavninja 2
Supporters Ian_Gere Posted December 30, 2014 Supporters Posted December 30, 2014 Good job, Chris. Like the way there's room for some more Airsoft_Mr B and cavninja 2
Supporters TheFull9 Posted December 31, 2014 Author Supporters Posted December 31, 2014 Yeah.. there actually isn't, just missing 2 Glocks from the picture, ha. That was as wide as I could make it to fit in the space available though, so cest la vie. Main thing is I learnt a fair bit during the build process and the shopping for the materials about what's available to work with and ways to make maximum possible use of the space. Mk2 will probably be an upside-down T shape to double capacity while still just using the one vertical board, a different hole pattern for the pegs and proper wood instead of reconstituted stuff. The plyboard does work alright, takes a stain and is mega cheap, MDF would make for neater results but looks even uglier than than the ply. Looking around B&Q and Homebase though I found all-pine 'furniture board' which comes in pieces far wider than the average plank, as well as stuff called 'hobbyboard' which comes in some nice hard woods and looks to be planks that are glued and heat pressed together to essentially make one piece. Costs about £15-20 for a big enough board to make what I need, but that will be essentially the entire monetary outlay; which is very reasonable for a quality storage solution I'd say.
TacMaster Posted December 31, 2014 Posted December 31, 2014 That's extremely reasonable compared to some of these airsoft specific rifle/pistol storage solutions- the modular rifle rack sold on AW is ridiculously expensive!
Popular Post Mack Posted December 31, 2014 Popular Post Posted December 31, 2014 Made myself something similar a while ago. Although most rifles are sold now and it now looks like this GingerBreadMan, cavninja, Monty and 4 others 7
Russe11 Posted December 31, 2014 Posted December 31, 2014 This has got me thinking. I am going to need a case for my Owen gun. it should come apart for storage so 3 sections for Stock, Reciever and front end. Hmm, something like this maybe: http://www.amazon.co.uk/gp/product/B0049PBLEQ/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3WSG2SBMDT50 Add some dividers and some elastic or velcro straps for mags inside the lid and it will even work as a seat. Hehe could be the most unusual gun case for the most unusual gun
Supporters TheFull9 Posted January 1, 2015 Author Supporters Posted January 1, 2015 Pretty good looking setup mack. Never lived anywhere I've been able to have any RIFs or gear out so I'm pretty envious I have to admit. cavninja 1
Adam3088 Posted February 12, 2015 Posted February 12, 2015 /revive Needs some finishing touches, such as finding something to pad out the rifles as they're all wonky like. DEF 1
cavninja Posted February 12, 2015 Posted February 12, 2015 Lovin' the Man-Cave Mack! Tacti-cool!!!! i gotta make me one of those PC/Helmet display stands!! And it's in camo too!!! I'm moving in to a new place at the end of the month that has a spare down stairs reception room, I'm thinking Man-Cave/Study/workshop/gun room/memorabilia!!! I'm looking at some peg board and hooks to display all my gun on one wall, if any one has any experience or trip for me, I'd much appreciate it Lovin' this thread already!! airsoftwarrior147 and Mack 2
Supporters Ian_Gere Posted February 13, 2015 Supporters Posted February 13, 2015 Peg board is really versatile and relatively hardwearing, but only if used right - if you accidentally overload it, it tears easily and looks so shit - like a 1970's hardware shop TBF it doesn't look much good even when it's freshly painted. You might be able to find something cooler intended for shopfitting. Perhaps even cheap on fleabay if you're prepared to collect it in person. cavninja 1
cavninja Posted February 13, 2015 Posted February 13, 2015 Hmm interesting Ian, got any pics or names of the stuff I could search for? I have two rifles and three pistols at the moment, so I guess you're looking at about 13kg all up weight. I found some 18mm and 25mm pegboard on Amazon, I'm guessing it's referring to the thickness, I would have thought 1" thick would be pretty strong?
Supporters Ian_Gere Posted February 14, 2015 Supporters Posted February 14, 2015 Hmm interesting Ian, got any pics or names of the stuff I could search for? I have two rifles and three pistols at the moment, so I guess you're looking at about 13kg all up weight. I found some 18mm and 25mm pegboard on Amazon, I'm guessing it's referring to the thickness, I would have thought 1" thick would be pretty strong? Yeah, I'd imagine so too, but I have seen it mangled so it is possible - I'm guessing that if you don't fit the hooks properly they rip out. The only stuff I can remember the proper name for is "Twin Slot" - it's not as inherently customisable as peg board, but it is definitely strong enough to take any of the abuse hanging guns from it may present and, being steel, it doesn't scuff up. cavninja 1
airsoftwarrior147 Posted February 14, 2015 Posted February 14, 2015 Lovin' the Man-Cave Mack! Tacti-cool!!!! i gotta make me one of those PC/Helmet display stands!! And it's in camo too!!! I'm moving in to a new place at the end of the month that has a spare down stairs reception room, I'm thinking Man-Cave/Study/workshop/gun room/memorabilia!!! I'm looking at some peg board and hooks to display all my gun on one wall, if any one has any experience or trip for me, I'd much appreciate it Lovin' this thread already!! I've got some similar to peg board, Out of the post office over my road, they were refurbishing so I just asked and took some, just need hooks and whalla cavninja and Airsoft_Mr B 2
AirsoftTed Posted February 14, 2015 Posted February 14, 2015 Hmm interesting Ian, got any pics or names of the stuff I could search for? I have two rifles and three pistols at the moment, so I guess you're looking at about 13kg all up weight. I found some 18mm and 25mm pegboard on Amazon, I'm guessing it's referring to the thickness, I would have thought 1" thick would be pretty strong? Slatwall? The type with the metal reinforcing in the groove. You can get all sorts of hooks for that I think. Seen it used in plenty of airsoft shops. Airsoft_Mr B, Ian_Gere and cavninja 3
skeeter Posted February 14, 2015 Posted February 14, 2015 Those displays and collections are fantastic. My own modest collection dwells in gun cases in the spare room. But I can at least show the current Mrs. Skeeter that I have some way to go to before she can say I have too many. Ian_Gere 1
cavninja Posted February 14, 2015 Posted February 14, 2015 Slatwall? The type with the metal reinforcing in the groove. You can get all sorts of hooks for that I think. Seen it used in plenty of airsoft shops. http://www.theshopfittingsstore.co.uk/slatwall-panels/2400x1200mm-slatwall-panels/white-slatwall-panels-click-to-see-discounts-/prod_164.html Top tip Ted! Thanks, I think I may have just found the solution for my gun displaying - book shelves - and eclectic military hat collection needs!! Airsoft_Mr B and AirsoftTed 2
Undieing_Lust Posted February 15, 2015 Posted February 15, 2015 http://www.theshopfittingsstore.co.uk/slatwall-panels/2400x1200mm-slatwall-panels/white-slatwall-panels-click-to-see-discounts-/prod_164.html Top tip Ted! Thanks, I think I may have just found the solution for my gun displaying - book shelves - and eclectic military hat collection needs!! This is the Pegboard that I use and I love it to death. http://s13.postimg.org/pmt66pqsn/DSC_0096.jpg Metal ones are brilliant because I can stick the magnetic dishes for screws and stuff onto the board. And you can mount guns and stuff onto it, you can see my power screwdriver mounted to it on the bottom left. cavninja and Ian_Gere 2
Supporters Ian_Gere Posted February 21, 2015 Supporters Posted February 21, 2015 I bought a plastic peg-board & tubs kit a while back but didn't get round to attaching it to a wall - this thread has finally guilted me into pulling my finger out: ...although this is actually only half of it: there's another back board & more tubs but i ran out of rawlplugs and motivation For the moment i've just tossed a bunch of stuff that was lying around on my desk into it, but when I fit the 2nd board above this, I will have a major boost to the tidiness and efficiency of my gun teching efforts. I'm tempted to buy a few of the back boards to use to attach my guns to a wall in my back bedroom too, so I can use the same tubs for accessories, but that will depend on whether ordinary peg board hooks will fit into the holes... So, Undieing_Lust, what diameter is the steel rod your hooks are made from, please? cavninja and Undieing_Lust 2
Russe11 Posted February 21, 2015 Posted February 21, 2015 Well I have my case just about finished for my Owen gun. It is a wooden box bought off amazon, lined internally with craft foam and externally with lots of different pictures relating to WW2 Australia (recruitment posters, newspaper clippings, photos, paintings) glued on with PVA. I then varnished it and replaced the flimsy hinges with T hinges and a hasp and staple. I am still debating handles or lee enfield sling loops (I will have to carry a sling anyway so why not use it to carry the box). I will try to have photo's next week, when I have the Owen gun. Ian_Gere, cavninja and Airsoft_Mr B 3
SgtTalbert Posted February 21, 2015 Posted February 21, 2015 Although all the posts are 'display' based, the title does include transport, so here is my packed gun case (Hopefully I can twist the other halves arm around to letting me have a display area - until then, its all stuff in a wardrobe airsoftwarrior147 and Ian_Gere 2
Supporters M_P Posted February 21, 2015 Supporters Posted February 21, 2015 Remembered I got this year's ago from an American PX in Wiesbaden so now stores some of my stuff. ​ Airsoft_Mr B and SgtTalbert 2
Undieing_Lust Posted February 24, 2015 Posted February 24, 2015 So, Undieing_Lust, what diameter is the steel rod your hooks are made from, please? I dont know off the top of my head. there are two types of sizes Type Spacing Thickness Hole dia. A 1" 1/8" 3/16" B 1" 1/4" 1/4" I think mine is A Ian_Gere 1
Recommended Posts