Quick Questions & Simple Answers.

[djben9]

Silly question, and it is late!!!, but GBB pistols are new to me, do I need to get a TM g17 mag or are there suitable alternatives that will fit by others???, is it as easy as AEG mags compatibility with pistols ???

[djben9]

On 29/07/2017 at 10:25 AM, HellJumper said:

Question regarding BDU's?

What's the sizing like is a 32 in Bdu bottoms the same as a 32 in jeans? 

Also bare in mind some have waist adjustment, my waist size with say helikon combats are quite tight on legs so go size up.... but most will let you return, military 1st are excellent with that 

[Guest PT247]

1 hour ago, djben9 said:

Silly question, and it is late!!!, but GBB pistols are new to me, do I need to get a TM g17 mag or are there suitable alternatives that will fit by others???, is it as easy as AEG mags compatibility with pistols ???

use WE mags, they are cheaper and better

[Prisce]

Some TM guns don't cycle WE mags, I had a G18c that wouldn't cycle on WE mags.

[djben9]

I've got the billy basic M4 of the pistol world, TM G17 

[SeniorSpaz87]

Quick question - would the KWA Vector take glock mags like the real one does?

[Guest PT247]

doubt it, no money in making interchangeable parts! ;-)

[djben9]

Anyone else tried a WE mag in a TM and had issues or none at all??

 

just before i go buy a spare mag

[Guest PT247]

I run WE mags in my TM G17 with no issues

[djben9]

right, thats good enough for me!

[OrchMan92]

ASG blaster or ASG blaster devil BBs?

[Guest PT247]

makes no difference really

[jcheeseright]

On 8/6/2017 at 9:11 PM, SeniorSpaz87 said:

Quick question - would the KWA Vector take glock mags like the real one does?

 

Nope, top of the mag is different. Vector is .45 remember, all airsoft glock mags are 9mm scaled. 

[OrchMan92]

5 hours ago, PT247 said:

makes no difference really

Thanks!

[HellJumper]

Will the elite force 27round extended mag for the 1911 work in my KWL nighthawk recon?

[SkittlesRandom]

Hi All,

I am currently having an issue with my TM CQBR, i have fitted the angry gun wire cutter rail with no problems at all but i have noticed that the outer barrel is angled slightly to the right and is not in the centre of the barrel.

The gun still shoots constantly and is accurate as hell but i was wondering if there is a way to remedy this from happening as it bothers me more than it probable should.

 

Thanks in advance.

[Aengus]

Cheapest place to get TM M&P9 magazines?

[djben9]

radio users....

currently using standard UV5r ear piece and mic....

Looking on the web and here, i'd prefer something low profile as i wear the V2 mask that protects your ears (very useful on sunday!)

 

are there any good in ear pieces that would fit and would i still need some kind of PTT?...... the current mic is fiddly with gloves and when the cable gets caught!.....other issue is i tend to swap headgear often so something that's easy with cap / boonie and fast helmet....

 

probably similar to this.....

 

http://hwairsoft.com/airsoft-low-profile-helmet-integrated-headset-boom-mic-radio-black-z/

 

still browsing so may find an answer.

 

 

[Aengus]

Would this tank blow up this reg? (aka what is the max input pressure)

[Tommikka]

2 hours ago, Aengus said:

Would this tank blow up this reg? (aka what is the max input pressure)

That’s a standard 3000psi cylinder with a regulated output of probably 600 to 800psi

 

The airsoft regulator ought to easily accept that kind of pressure and output at a suitable airsoft pressure 

 

All should be good

[Guest PT247]

2 hours ago, Aengus said:

Would this tank blow up this reg? (aka what is the max input pressure)

You normally need a step down reg on the bottle 3000-800psi and then run the reg off that. You need to check with Wolverine the operating pressure of their reg

[Aengus]

18 minutes ago, PT247 said:

You normally need a step down reg on the bottle 3000-800psi and then run the reg off that. You need to check with Wolverine the operating pressure of their reg

Had a look and it should be fine. 300-1000 psi input so.

[Guest PT247]

does the bottle have a 3000-800psi reg built in? 

[Aengus]

25 minutes ago, PT247 said:

does the bottle have a 3000-800psi reg built in? 

Yes.

[Tommikka]

6 hours ago, PT247 said:

does the bottle have a 3000-800psi reg built in? 

 

For future reference, this is a High Pressure air regulator (in this case on a 3000psi cylinder, but a 4500psi is also about the same but starting st higher pressure) 

not in sight is a fill nipple (see picture 2)

the bottom nut is the high pressure burst disk (effectively a fuse in case too high a pressure of air is filled)

Next in the centre the pressure gauge with internal cylinder pressure

Then inside is the regulator wotkings stepping down 

On the right is the low pressure burst disk in case the regulator fails

 

 

Final picture is the valve on a co2 cylinder

That does nothing other than release the co2, and can either have (1) just a pin valve to release co2 when connected, (2) just have an on/off screw to release co2, or (3) have both pin valve and on/off screw

The co2 is naturally released at aporix 850psi in it gaseous state, which is why the original air regulators were set at 800-850 psi