Cheeky vimto

It's not jamming now but it's screeching like a mofo..

I've upgraded my EBB GR16 gearbox and found after a few shots it would jam up. Taking the gearbox out shows it always jams with the spring pulled back under tension. A little history on what I've changed; - Disabled EBB by changing cylinder to SHS ported. - Cut off 2 teeth on piston for AOE - changed cylinder head for a red SHS double o-ring - installed 70D sorbo pad - Changed spring guide for one with a bearing - Changed gears for SHS 13:1 - Changed to 8mm bearings - Shimmed gears - Installed mosfet - Changed motor to Lonex A1+ I've managed to open the gearbox and the first thing I've noticed is the end of the spring guide has unscrewed itself; Closer inspection shows as it's all come loose the washer covering the ball bearings rattled around and the spring has damaged the bearing runner, making it useless. Could this cause the whole thing to jam though? I still have the stock spring guide, I'll try it with that in it.

After reading this I'm glad I went with a used EBB raider vs a cm. It's the little things like the charging handle having a purpose that makes the difference.Although the first thing I did with the EBB was to change the cylinder to stop the blow back . Thanks for the review flex.

Maybe it's just me but I can't see a massive difference.

As far as I can see the only difference is built in m4 mag pouch and a steel wire? What else?

Looks a lot like the WAS DSC plate carrier http://www.uktactical.com/p-6361-warrior-dcs-plate-carrier-base-multicam.aspx

Raise a dispute. If it shows up you can always cancel it.

Hi, welcome!

$60 with free delivery, bargain!

Holy smokes!

My work mates repsonses are usually somethine like "Why don't you just join the army and go to Afghan". I understand from the outside looking in we're a bunch of grown men running round with toy guns but it's not affecting their lives in anyway so stay the f*ck out of it.

Thought about buying used? Both of my guns have been used and I've not had a problem (Granted my 2nd gun I completely changed the gearbox). Most internal parts on an aeg are relatively cheap to change if theres a problem. You could save yourself a bit of cash buying used and getting your gear separate rather than a package and it would probably be a better spec. I find with most hobbies there are always "starter packages" availble but what they put in the package you will end up replacing after a couple of uses as you find the quality isn't very good.

Don't forget you'll need a die wrench!

http://www.rdgtools.co.uk/acatalog/14MM-x-1.0-SPLIT-DIE--CARBON--LEFT-HAND--fine--1290.html

Dies only cut in one direction. If you think about the way the thread spirals it will be going the same way if you flip it.

About time I got a proper bag for my guns and stopped using a rucksack. It's smaller too so forces me not to carry all the random sh*t I never use on a skirmish but bring anyway. £18 off ebay

https://www.facebook.com/groups/AirsoftUKsale/?fref=nf I'm pretty sure I seen one for sale earlier on today.

I always see used grenade launchers for sale on Facebook. It's just a phase. Once you realise how little you use it you probably won't want to carry around so much.

It arrived today. On the back of the package it shows all the motors and what they're used for. Looks like the "supreme edition" is the A1+ motor which is the same as the A1 but made for stronger springs. So it must have more torque? The paper inside the box doesn't mention the A1+