Lozart

Pin punch. Use the right tools instead of knackering the parts and your tools.

That's rubbish. With practice they're just as good, it's about you not the sight. Granted reflx and dot sights usually have a more open sight area so you can have more awareness by peripheral vision but seriously - iron sights are just fine (as long as you use decent ones).

Right - solution found! You need either this tool: Or a pair of needle nosed pliers. Have a look here for an explanation (around post #16) http://www.airsoftsociety.com/forums/f10/g-g-cm16-r8-l-93854/index2.html

OK. Looking down into the ring, there seems to be a couple of indents that might be registration points for a two pronged spanner (a bit like a tap fitting spanner if you've seen one of those). If you put a screwdriver in at an angle and hit it with a hammer does that rotate the inner black ring?

The two screws bottom left and bottom right - are you saying you can't get them out with an allen key?

You need to undo the hex headed bolts to split the outer ring. It's the same as the one in the first video.

Have a look at these:

Doesn't mean they don't work...

Why not just add a rail section to the moe guard?

http://www.dtic.mil/ndia/2005smallarms/thursday/taylor.pdf

I know. I meant that the "srs bsns" milsim types don't play with Hi caps.

Most milsim types tend towards low caps...

It's three in NO LESS than 2 months but NO MORE than 12. If you're OK with renting then yes, stick with it until you get your UKARA number (I'm assuming you're over 18). Gloves are good, "tactical" ones may seem pricey but normal ones are too think to properly feel what you're doing with the gun. Mechanix gloves are pretty much the de facto standard these days.

Technically I think you could but you'd have to provide proof and that is much easier if it's the same site 3 times.

Yeah, fit 'em anyway. Then they'll be AWESOME midcaps that will be the envy of all your friends.

Soooo....get a duty belt. Simples.

Yeah that's rubbish. Still, at least you know what the problem is.

Use two belts. A bdu one to hold your trousers up and a decent duty belt to hang your holster from. Also - difficult to recommend a holster without knowing what pistol it's for.

The package explicitly lists "full face mask".

More than likely just coveralls but I would ask them to make sure, either email/call or ask on their FB group https://www.facebook.com/groups/22134443544/

Sorry, I meant what brand of BBs...

From Wikipedia: Nice. Personally I'd say that unless you're fighting in deciduous woodland while it's all turning lovely colours (for that week before all the leaves drop off in a fit of laziness) that it's a bit red/bright.