GiantKiwi

Shame the gearbox isn't even remotely noob friendly, I really hate V7's

I've had every airsoft MP7 in existence at one point or another - get the TM GBBR, the 1:1 Scale ones are a completely waste of money. WE: Magazine gas efficiency is by far the worst of any SMG, Hop unit is a joke, 10 inch grouping at 20ft. the trigger needs to be rebuilt OOTB to last longer than a few game days, very vague fire selector. Gen 1 is horrendous, Gen 2 is only marginally less crap, but at least the trigger lasts longer than a few game days. New Wave is just a gen 1 with a slightly better trigger group. VFC: Well its VFC for a start, so don't expect anything to last long. Mags leak like buggery, it came to me doing 420fps with no immediate availability of any velocity reducer (got it at launch), Mag efficiency was pathetic. KWA/KSC: NS2 system is brilliant for gas efficiency, unfortunately the gas reservoir is smaller than most and as such efficiency is only OK, NPAS or equivalent is a complete PITA but necessary as it can come stock as high as 460FPS. TM: Will need the stock nozzle replaced at some point if you're using Green Gas as propellant, so order it before it fails Other than that, by far the best of the bunch, reasonable mag gas efficiency, reasonable FPS (mine was doing no higher than 350 on green gas with the hottest day it was used on being 31 degrees C), Decent, reliable hop.

And you take it WAY too seriously. NCO's and Officer's? Really?

News to me as well

I was under the impression that the airsoft aspect of that show was no longer continuing after last year, when the people organising it quit.

Shiny...Unless thats gas or P*/SMP/etc based, Orga is a waste of time, you won't be able to produce enough consistent air volume to make use of its advantages.

That'll do

With it's relative age compared to the market and non-existent spares, no amount of fanboy-ism is going to make it last very long, it is by far the worst GBBR for mag gas efficiency as well.

I've got a 2.3L Ecoboost 2016 Ford Mustang (no V8, because i'd actually like to get more than 15MPG) on order, because fitting in normal cars is fun for my height. Just need to actually pass the test now (Insurance is £240 a month, which for a car I want isn't all that bad)

Wish some airsoft companies would start adopting M-LOK, getting accessories is proving to be a real PITA in the UK, already bought a load from the US, but would rather avoid that.

Silencer arrived, definitely looks much better - and as a complete surprise to me, it makes it noticeably quieter.

Got a over barrel silencer on the way, going to be about 24cm longer than that. The fluted barrel is RATech, and i'd rather not give any money to them if I can avoid it, as their QC is worse than WE.

Not so much. Back when I had one on a whim, sent it to them to get the LiPo mod and a (supplied) Eagle M100 installed. Came back with a standard AEG spring installed, the Eagle still sitting in the box in its packaging, stripped piston and them refusing to fix their cockup. Up until that point, i'd used the gun for 6 or 7 midcaps on a site range. Was working fine prior to being given to them.

This is a good start to my KC02 build - 10 minutes the gun to fit into a Magpul X-22 Hunter for Ruger 10/22 stock chassis. And it looks AWESOME. Not sure i'm going to bother with the GOOB silencer now.

ORLY? How's about the giant purple dildo swords from SR

Orga is a waste of time in an AEG without a bore up kit, which as far as i'm aware doesn't exist for recoils. Orga only works well with larger volumes of air than a standard piston/cylinder can provide. Added, it also brings the added bonus of a 35-45fps drop on the 6.13mm or 50-70fps drop on the 6.23 (hence the necessity for a much larger air volume potential), which would bring the OP back to square one.

Spent a few hours going through all the new G&G rental guns at my local site, and its a problem with the hop unit on all of the new design ones. Simple answer, you need to replace the hop unit completely, the unit is now made of a much softer plastic than they used to use, and the bit that engages the mag gets deformed too easily, and doesn't even engage it with some mags as its too short. We systematically replaced all the hop units with the metal lonex one along with a lonex hop rubber and sure enough, they have had no problems with any mag type since. One thing though, if you do do this, use the stock g&g barrel clip, yet to find a gun where the lonex one will actually fit in the receiver, courtesy of the pointless reinforcing strips on the outer diameter.

FYI physics dictate with no hop applied a maximum theoretical range of 50m at 350fps taken from an average shouldered height, and that is relying on perfect world situations ie no wind, 0% humidity, low temperature, low air pressure etc. 90-100m would not be possible on a site legal gun in the UK, as you would be needing 4.5J of energy, which roughly translates to 700fps on a 0.2g bb.

This will be the 3rd year in a row my brother spends in Mainland China for Christmas, Xinjiang for 2 years in a row, and now Beijing. I know exactly how much it sucks

Because the only place a Ratech inner should be installed is the bin. Literally the biggest cause of jam's in "upgraded" WE GBBR's. The Ratech carrier was only bought until the guy making the 3D printed ones gets his act together and starts letting people buy them easily >.<

Ok. This may take a while to type - ASG Special Teams Carbine (KJW KC02 V2) 5x Green Gas Long Mags, 6x CO2 Long Mags ASG 3.5-10x50E replica scope along with a custom killflash and sunshade Swiss Arms G.O.O.B. 320x45mm Silencer Tophatrunner VSR type Hop Chamber for KC02 Tophatrunner High flow Rocket Valve for KC02 Tophatrunner Barrel Spacers 4 Pack Kevin Forney Alu Piston RATech Steel Bolt Carrier for KC02 A+ Airsoft REAPS Bucking Orga Magnus 430mm 6.23mm inner barrel for VSR Magpul USA Hunter X-22 Stock for Ruger 10/22 in Black Magpul "" Hunter High Cheek Riser in Black Magpul M-Lok Bipod Lug Magpul M-Lok 11 Slot rails x 2 Magpul M-Lok MOE Grip

Sorry but the only person being a douchebag here is you, as per usual. You post shit like this as if you are the oracle of all things, when you clearly have no clue what you are talking about. If you don't like being corrected when you're wrong, don't post bullshit.

Nothing is "Gaming Spec" The entire concept is just marketing BS. Gigabyte aren't shite. Most prebuilt's use foxconn OEM boards, similar to those used by Dell for their cheaper office computers.

Needed the CPU and RAM for work back when I was working remote contracts, 1 titan x was won in a competition, the other bought on black friday for less than a GTX970, also the fact I'm running at 5120x2880 does start to necessitate the extra oomph