GiantKiwi

4x Templar Assault Systems Single .338LM Mag Pouches OD Viper Tactical Elite Lazer Battle Belt OD Condor Ambi Molle Holster OD Long rifle time

Depends who you order it from on the spring, i've been told mine will be coming with an M130 giving approximately 430fps. The ones for the US market are coming with m150 springs as standard.

From what I gather, the only things that can be upgraded per se, is the spring (AEG), the hop up bucking (VSR) and the inner barrel (VSR). But the bits that interested me the most was the built in trigger adjustment and the direct feed mags. Will have to wait and see though, as I won't be picking it up until the 16th.

Ares Amoeba Striker AS-01 in Urban Grey 3 extra mags for it. Because it was cheap.

Found this gem. Brand New, an AGM 416 costs between £150-180, the combined total of all the accessories and the gun new, is less than his used collected price.

5x PTS EPM midcaps from firesupport and a PTS EPS stock from PTS Syndicate directly. (even if i'd bought both from PTS directly, would have cost more, go figure)

Small adjustment, by way of AFG (and back to typically crap photos, because of crap lighting) - Now installed a jefftron V2 unit, and thoroughly impressed with it, to the point i'm replacing the stock G&G fet with one in another gun. Only thing left is to wait for the PTS Enhanced Polymer Stock's to arrive in the UK, as the CTR is a PITA to take off to put the battery in.

HMRC finally coughed up for my (hefty) tax rebate, so i've updated my machine a little bit, this is primarily for working, but side effect of it being slightly insane in games - hopefully excluding the GPU's this will keep me going for at least 5 if not more years. *denotes items already owned OS: Windows 8.1 (because certain components are still reported as unstable on 10, a year after release, stability is king.) CPU/s: 2x Intel Xeon E5-2699v4 2.2GHz 22 Core/44 Threads each. Coolers: 2x NZXT Kraken X61* Motherboard: Asus Z10PE-D16* (bios flashed for Broadwell-E) RAM: 128GB Samsung DDR4-2133MHz ECC/REG CL15* (8x16GB, still got 8 slots free for further upgrade potential) SSD's: 512GB Samsung SM951 Boot "drive"*, 2x Intel 750 NVME PCIE 1.2TB GPU: 2x EVGA GTX Titan X (Maxwell)* (as soon as available, will be getting Pascal Titan X's) PSU: Corsair AX1500i* (even for this, PSU is massive overkill, but when it was bought, it was on a deal which made it £45 cheaper than the 1200i) Case: Coolermaster Cosmos II* Fans: Lots of Corsair ML140's no led version(Maglev fans, virtually silent compared to standard fans)

Finally managed a reasonably good photo of this that isn't completely blurry Edit: even if it's monster dimensions :/

Yeah, a paltry sum of £741.95 o.o

Should be excellent, as its just a GHK G5 in a TAR chassis.

Clone CTR Stock (black) Clone AFG (black) ACM Surefire M300 ACM Dual function rail mount tape switch 3x Jefftron V2 mosfet 1x Lonex Titan A2 motor 1x Lonex M4 hop chamber & hop bucking 6x VP 1300mAh 11.1v LiPo's (deans)

8x KJW KC-02 CO2 Mags 250 CO2 Capsules Should keep me going for a few months

Baofeng's are Kenwood dual pin for PTT's.

I still don't understand this fascination

Have to question what the point of the MOSFET in them is (outside of the obvious) if it can't do cycle completion but hey ho...

You would be looking at about £360 without the Modelworks stock, and £460 with it. (excluding p&p)

but but magpul x22

£160 better spent on a G&G Combat Machine, it will last longer.

Good luck with that. Airsoft was only legalised in the Netherlands a few years ago, and to take RIF's over you have to apply for an exemption for them with the Dutch Airsoft Sports Club (NABV) months in advance (I was told 3 months was usually minimum acceptable by a cousin who plays over there and holds NABV Membership).

As it explicitly says airsoft guns, its pretty well clear cut that its going to affect us.

They are all clones regardless, which is why those convoluted semantics make no sense whatsoever.