Jump to content

MiK

Members
  • Posts

    407
  • Joined

  • Last visited

  • Days Won

    4
  • Feedback

    0%

Everything posted by MiK

  1. @Enid_Puceflange playing Devils advocate here........ If you was actually dead and was indeed walking back to spawn and someone hosed you down would you be pissed off/kick off/moan to marshalls ?? You would only pull that one once with me as I would “trip-tap” you any time I saw you in the game zone
  2. Decided to slap my tracer on my AAP-01 and turn on the “Fun Switch”

    sorry for wobbly piccie couldn’t see jack till I started to fire

     

    video0.mov

    1. Show previous comments  6 more
    2. Shamal

      Shamal

      Hi Mik 

      Still cant download mov.☹

    3. MiK

      MiK

      @Druid799 LOLOLOL DAAAAAMN!! My Halloween surprise has been found out :(

      @Shamal even the upload to the site @ 21:36 doesn’t work ?? :(

    4. Shamal

      Shamal

      Hi Mik 

      Do you mean the Full size render.mov? Cause that failed to download.

      🤔

  3. WOW!!  Come Friday 00:01 the whole of Nottinghamshire is in Tier3 Lockdown - unlucky Notts ‘Softers :( 

    1. Shamal

      Shamal

      Does that apply to outside games?

    2. MiK

      MiK

      tier 3 has these (amomgst others)

      You can meet up in groups of up to six people in parks, beaches, countryside or forests

      You are advised not to travel into or out of tier three areas, other than for work, education, youth services or caring responsibilities

      Nottingham (shire) is also having a 9pm alcohol rule too

      So it’s not looking good for anyone in Nottinghamshire 

    3. Shamal

      Shamal

      Cripes!

      Robin hood wouldn't have put up with it.... lol

      Regards 

  4. Silverback MK23 suppressor just arrived - so quiet....... OH SO QUIET !!

    1. sonofsammo

      sonofsammo

      Shhhhhh..... Shhhhhhh

    2. Shamal

      Shamal

      YOU ARE RIGHT. 

      IT'S BLOODY DAMN NEAR SILENT!

      Oops sorry 

       

  5. Skirmshop UK has got Silverback MK23 Suppressors back in stock so they have just gained 29 of my finest Great British Pounds & 10 of my Shiniest pennies
  6. So Mr stupidboi stood on his MK23 silencer with his hoofs of doom - a replacement is needed I see the silverback one is sold out everywhere - I know this question might offend some but is the “N” one any good ? Or anyone offer up a half decent replacement??

    1. Show previous comments  2 more
    2. MiK

      MiK

      @Hatchet function over form - you know the make of said Stubby ?

    3. Hatchet

      Hatchet

      I'm afraid not. It was just some generic plastic one, probably pick one up for £15-£20. The beauty of the adapter is that you can just select whatever takes your fancy/is available. You can also take a slightly different route as Lee's Precision does a threaded 14mm barrel, but it's about £40, which is a relatively expensive way of achieving the same result.

    4. Samurai
  7. @Cr0-Magnon it’s all black and I’m a little freaky/ocd over having manuals for stuff
  8. AAP-01 arrived early doors - seems to fire well but haven’t had much time to mess about with - Yes the manual is in “French” - any translators about ^^
  9. I bought a AAP-01 for 75£ from PB this evening (soon as I got the email really) - coming Friday /edit just looked on PB for optional extras but the guns all sold out in all colour options
  10. Part one of the outdoor mask build well underway !

    Converting a ski mask that my spectacles fit under - mesh conversion done :)

    now waiting on the “goo” to arrive ;/

     

    1263B413-336C-4D26-9F21-793596CEBEBA.png

    1F10C378-6143-4384-94E8-7B82C1CE07F0.png

    1. Rogerborg

      Rogerborg

      Looks really nice.

       

      Why mesh though, versus putting the time into a fan conversion?

    2. MiK

      MiK

      For sniper mode - I already have a gung-ho/CQB fan mode one :)

      DD90663B-4645-4146-8E2B-698B70377B30.jpeg

  11. Best Sunday Ever !!

    Wife is out - Watching the GP - Well into new Goggle build 

    and if LCFC loose I make £50 :)

    1. MiK

      MiK

      Bah ! City won 0-3 bye bye fifty quid :(

  12. What happened to my AFUK badge ?? :(

  13. @Steveocee Yea I had a nice can of WD40 Specialist Anti Friction Dry PTFE in my stockpile of “things bought for one job ages ago” stuff
  14. @Hudson All sorted !! After stripping it all down and remember that white peg I was asking about yesterday ?? Well it wasn’t tight enough got that sorted had a nice seal and was firing around the 460-465 mark then I tweaked the hop-up a little and it went 472-475 - don’t have any screenies as I did a firmware update when it popped up and I lost everything and now it’s tipping it down so can’t get back out. But if it’s nice tomorrow evening I’ll try again and get some numbers for both .2 and .4 /cheers for the pointers
  15. @Hudson Ok I striped that down to trigger/upper/cylinder when I fire I can hear a kind of “faint bubbling” inside of the cylinder - sounds like air is coming out of the middle/back of the cylinder nothing seems to be coming from the nozzle
  16. @Hudson cheers bud I’ll take a peak for the leak - should I lube the outer cylinder to make the pull a little smoother ?
  17. Ok done the install - wasn’t as scary as I thought it would be - just really took my time. I did some Chrono on .2’s and .4’s I haven’t adjusted the hop yet - just wanted to see what was what - there’s some variation in FPS tho ( I had changed to .4’s on the chrono just forgot to change it on the app but the numbers match the chrono) with the variations is that a air leak or just a bedding in thing ? Also the mags a little stiff getting it in - any reasons for that ?
  18. Do I keep this screwed in or take it off ? lots of pistons don’t seem to have that solid peg (it’s not a nozzle)
  19. @leadly Was that on everything or just the spring or piston ?
  20. Dumb question (spose it isn’t if you know) as most YT vids seem to “gloss” over what they/you should use ..... What lubricant should I use on the Spring guide ? Spring ? Piston ? Cylinder ? oh and with the PSS10 piston do I leave the white “pokey nozzle” on it ?
  21. Oki doki - I’m back!! (‘sorry for disappearing mid build) All the parts have been sat idling for the last two months on my bench but due to serious real life stuff (not the C-19 thang) having to support my Wife and family after Emma’s brother collapsed one Monday morning and ended up in a coma - he is awake now and in a hospital closer to home but we can’t visit (FU C-19) and things have settled down family wise to a point I can turn some of my attention to the T10 that was/is collecting dust. So I actually did buy the following from SkirmshopNL Maple Leaf Omega Nub Tensioner Maple Leaf Autobot Bucking 75° Maple Leaf Autobot Bucking 70° Maple Leaf 430mm Crazy Jet Innenlauf für VSR MARUI VSR-10 FN-SPR Action Army VSR10 / T10 Hopup Chamber Laylax PSS10 High Pressure Piston (Zero Trigger Version) For VSR-10 Bolt Action Rifle Series Action Army Twisted Cylinder For VSR10/T10 - Silver Grey STALKER Panthera Concave Nub Set (3pcs) I'm gonna get on to it this weekend, so I’m gonna hit up the YouTube for some how-to’s and finding out what lubricants is needed where/which parts.
  22. @leadly Gun Cost £55 from PB and £103.83 (including all postage) in parts & .40 BB’s from LongbowBB & Skirmshop NL - excluding green gas/bits needed to mod the gun like a drill bit etc I've just chrono’ed it - And it was 325-345 ave 335 with it untouched but went to 337.8-344.3 ave 341.4 with about half a turn of the TDC nubs - admittedly they really shot out well but by hell they flew up cloud bound I slapped some 0.40’s in and got 229.2-264.8 ave about 240.8 - I was around the 0.98-1.30 ave about 1.08 joules I forgot to reset the chrono for the heavier BB’s /nubcake but the 0.40’s flew like a laser - dead straight at about 40 metres \o/ first shot is from the unit then I remembered I had the Acetech chrono app for my Tracer unit 😗
  23. Ok been to collect the bits n bobs and going very very slowly drilling/filing and putting back together - mods are done (admittedly I have to open it all back up to put that pin back in).
  24. @Steveocee It’s what’s been mentioned on a few MK23 upgrade vids I’ve watched over the past week or so 😕 I have just ordered a 8mm bit & a needle file set from toolstation for click’n’collect in the morning - only £6.79 in total which should do the jobbie
  25. Oki doki a little tappy-tap-tap action to get that back in but I think I’ll test hop/feed before I do it - just in case I’ve bodged something up
×
×
  • Create New...