enzo47

if this is a ps14 then it will not have the variable gain like a pvs14 and it could be a fat or slim anvis tube - if its gen3 then i would think slim anvis ,as may have been  said above - black faint marking while looking at light sources can be normal especially streaking as you move across them .should fade quickly.usually does it when first used and not so much when been on for a few minutes
if there is condensation inside then best to get it dried out as it will do harm , if its put together in a dry atmosphere then purging should not be needed

matter been resolved. they sent me my p2 acro plus few more things with free shipping I've requested. very friendly people just bit unorganised I think .
wasn't that bad experience I will try them again if needed. 
 

matter been resolved. they sent me my p2 acro plus few more things with free shipping I've requested. very friendly people just bit unorganised I think .
wasn't that bad experience I will try them again if needed. 
 

More revolvers. Sorry. 

excellent  , how is the magazine insertion on yours ? Heard reports of incredibly tight fit , to the point you feel like it might break  
 
 
 
A little tinkering with an RMR plate on this little beauty  
 

Only been waiting since February 😁

Strike Industries TM MWS completed(?)
Might experiment with a small red dot or something, but I can't see it changing much more than that. Started in March last year! Time flies. Love how it turned out.


 
To match, also built a Strike Industries TM G17 (decided to not go with the EMG/G&P prebuilt one in the end). Waiting on a nicer red dot to arrive, but God knows when that will be.

 
Make quite a nice pair!

Not movie accurate of course but fun all the same  
 

EmG or Jag Precision x Taran Tactical International Licensed JW3 Combat Master

Purchased the Samoon Co2 Kit for the GHK Glock, while they include a few steel parts that aren’t steel in the pistol originally which seem of reasonable quality, the Co2 mag is awful and the Co2 ( Supposedly ) nozzle broke after 3 capsules. 
To be fair it was great shooting it with Co2 for the very limited time I could, but for what is a very expensive kit, especially with posting and charges, my advice, DON’T. 
 

Any 1911 fans out there? Here's the latest build that I tried. It won't be replacing my glock for skirmishes anytime soon, but a cool build nonetheless..
 
Did you know people do bowling with 1911's? Apparently it's called "pin shooting" and there are specific styles of 1911's catered to that. Here's the post that inspired this build -> https://www.thearmorylife.com/bowling-with-a-pistol-a-guide-to-pin-shooting/
 
Wanted to get a short compensator like the real-steel examples in the article, but couldn't find any similar so I went with a 45" muzzle chamfer instead. With the looser tolerances of airsoft it doesn't look as blended to the bushing as RS, but I think I like it. I had to learn the hard way that stainless takes a lot longer than you think to grind out using hand tools...😅
 

 
In certain angles it makes the bore of the outer barrel look bigger than it actually is

 

 
 
some real-steel examples that I referenced:
 
 

Considering the OP just wants it for a display and occasional fondle I don't see any reason to consider a plastic version.
 
So you're worried about the gold paint coming off?
Just touch it up with a gold felt pen and when dry put some nail varnish on top.
It'll look great and feel much better than a plastic replica.
 
Those are beautiful @enzo47
 
@Shamal Yeah, I love my WE M9A2 v2  Action is sooooooo smoooooth
 

I love my WE berets m9s. Mind the Barry Bolton V2 to be the best because it's more robust. less likely to blow of the back end when in full auto. 
 
if you worried about the emblem on grip just touch it up with art fixative spray. That will retain emblem for much longer. 
 
 

I love my WE berets m9s. Mind the Barry Bolton V2 to be the best because it's more robust. less likely to blow of the back end when in full auto. 
 
if you worried about the emblem on grip just touch it up with art fixative spray. That will retain emblem for much longer. 
 
 

Me personally I’ve always thought when you come down to it getting tech work done if your not confident doing it your self is like standing on a ledge in the pitch black and all you can do is grab your nuts and jump , your either going to land on something soft and squishy 🥰or your getting something sharp and spiky up your arse when you land ! 😖

Something a bit different: WE M14 (with Ra-Tech trigger group) inside a realsteel TROY S.A.S.S. (Semi Automatic Sniper System) chassis.
 
Very nice high-end chassis, CNC aluminum, the M14 needs a few adjustments, the trigger box doesn't fit in flawlessly yet. Will see how to fix that.
 

 

Heres all the British stuff I have at moment. Some are still wip. 
And currently working on a retro model 725 as used by sfsg. 
Next will be the G3 turned into a G3KA4. 

Lovely as always Andy. 
Need to get my collection out for an updated family photo 🤣

ive should done more research and not took this matter so lightly . i guess i will have use my local dive shop. 
 
Thanks guys stopped me from doing something stuipid  lol

I’m going to guess that the compressor produces around 150psi
Not enough to generate decent pressure for a bottle, and would need additional filtering to avoid contamination 

This is come great stuff. i brought a hpa setup. was hoping use with my compressor at home. 

the John Wick challenge.
risky but very statisfying if you manage pull it off that is. i like to akimbo moslty 

the John Wick challenge.
risky but very statisfying if you manage pull it off that is. i like to akimbo moslty 

So finally got the ICS UKSR sniper rifle stock and added it to my KWA Kriss Vector GBB. So given that the LayLax components are made for the Krytac AEG and not the KWA GBB, I'm guessing this is the only custom LayLax GBB Vector in existence (?). 😁

TM 1911