BigStew

There is second hand sales section on this forum. For snipers power limits are often different site to site best bet is to check with the site your son intends to play at. I would do a forum search on the SSG10 many think there are better guns for less money.

ICS sell a replacement outer barrel that has a 14mm thread. fire support might have them in stock. Other option is to get a die and cut a thread on your existing barrel.

The gun as is in the picture £80ish the MOSFET makes little difference they're only 40ish new.

No decent photos on my phone. I have an aluminium set of armour made by a guy in Germany couldn't bring myself to spend 4k on a Terry English set. My pulse rifle is a snow wolf kit fitted to a WE Thompson and a golden eagle m870 I still need to figure out how to plumb it at the moment. Before all no going near people used to go to cons with the UKCM http://forum.alienslegacy.com/index.php. now the cqb sites have started to reopen I need to get it out of storage and play a game in it. Either that or finally build my Mjolnir MK5 armour.

Oh if you are going to order from KY get confirmation they have it in stock before you pay I am at month 4 waiting on parts from them.

You also got volume issues retailers won't get a decent price break on one offs most wholesalers will have pricing tiers they would most likely have to order dozens of a particular Rif to make it even possible to have a reasonable mark up.

has Krylon got their act together haven't used any in years the consistence was poor and very thin. i have used Halfords OD for Colonial Marine armour had good results.

poor sportsmanship all round there. used what you want play how you want to play. however i have never come across a gear snob running a stock TM its usually something overly upgraded (stupid rate of fire and running a ball hair below site limits) that breaks ever other game but in the end if that's how they want to spend their money all power to them. As always the golden rule of airsoft is don't be a dick.

back on topic I personally would not leave bulbs in mags for any length of time, but with airsoft it could wreck your seals in a day or stay gas tight for years. for the cost of a bulb is it worth finding out?

used them a few times coms anti brilliant but the stuff has always turned up

oh they will work i ran a couple with my TM 18c i just noticed a performance difference between the WE and the TM mags

yes but it won't seal as well as a tm mag

Seconded on the WE Glock mag

They appear to be ITAR restricted so odds of getting a genuine one is not good. If you know anyone in the states they might risk sending it you.

Hop should not be stopping the gun from firing is the gun dry firing ( if you put a gassed but unloaded mag in the gun and fire it) does the gun cycle?

BBs rolling out sounds like you have double fed the gun. That shouldn't stop it from firing. Have you checked the mag is holding gas if you have done everything else suggested. There is a valve on the back of it there should be serious resistance if you push on it. If there is not there is no gas in the mag. You should be holding the mag up side down when filling the mag should take 10 Seconds to fill.

Has anyone tried the 3d printable quick release holster file available on cults3d https://cults3d.com/en/3d-model/gadget/mp7-holster not sure I'd trust it but a quick release with a kydex sleeve would be good.

Have you tested the chrono with another gun just to make sure it's reading consistently? Also what ammo are you using a miss shaped BB could cause the drop. Next I would check the barrel make sure it's not damaged, hop unit make sure rubber is not damaged or and loose parts in the unit it's self. After that it would be open up the gear box check piston seals though odd it's not consistent.

If you watch a few negative airsoft vids on pistols he likes to fit metal kits on to TM 1911s and he states you don't need to upgrade parts to get them to cycle fine it will just cost performance so is the feel and weight worth the trade off for you?

And the only good CO2 1911s are KWCs. They are howeve prone to leak (CO2 in general) can be hot depending on time of year and how new the bulb is.

Cyma ak74 side folding stock. I want to swap the polymer furniture for wood at some point.

I ordered a CYMA AK from Daves customs it did arrive just within the 2 weeks

It requires more force to compress a stiffer spring so unless you up the pressure it will slow the the gun cycle rate. Anyway point being with out using a higher pressure gas a metal slide will reduce performance and using a higher pressure gas will run a greater risk of the gun breaking. If the OP wants a metal slide Guarder is the cheapest you should go and no after market metal slides, even the high end stuff is drop in. They all require modification to fit right.

just don't you'll make it perform worse. it will cycle slower due to weight and the additional force required to over come a stiffer spring.

So was doing a frame swap on a 1911 and I unintentional made a sacrifice to the airsoft gods when despite my best a efforts a sear spring flew across the room to who knows where. I really resent paying £8 for a set of replacement springs, so is there any way to find out spring specs so I can just order off an ebay seller?