BigStew

I had a WE SVD it was decent.

You can get a c02 conversion for it. But again why get a bolt action version of a semi auto DMR.

There are multiple ways depending on how mechanically skill you are (all methods require a chrono). 1 use a more powerful gas( not a bad idea to have a variety of gases for different ambient temperatures). 2 fit an adjustable NPAS (would be my choice). 3 change the knocker valve spring to release more gas per trigger pull (no on the fly adjustment could suddenly find your gun is hot and unusable). 4. probably best way to get consists power would be to fit HPA valves to the mags( but HPA).

I though the HFC versions were based on the old KSC system not their current system 7 and so not compatible.

Well they were cheapest for PTS recoil mid caps. So ordered. So far email confirmation up dates have been good.

KSC=KWA=ASG all parts are cross compatable.

As the title says anyone bought from Empire airsoft. having been let down by airsoft direct saying they have in stick what they don't would like a bit of feed back before I place an order.

Try searching Google by part number. But most likely you are ordering abroad. UK retailers are extremely poor for parts support except for the more common guns(even then not great).

honestly yes 30m is bad 50ish meters should out the box performance. however there is no point doing anything until you have actually used it. when you get it clean the barrel. get several different strengths of gas(temp will effect performance) get a crono, a couple different weights of bb and set the gun at an actual measured range and see which gas/bb combo gets you the best performance at sub legal power limit

is the suppressor screwing on straight. if its misaligned that would cause random flyers. also worth checking that the exit hole in the suppressor is large enough and actually in line with the barrel. i can't imagine that that there is an air vortex issue as the BB is ahead of the pressurised air.

WE are good for spare part support but you will most likely have to order from Asia. £130 is an ok price but you could end up spending more than buying new you are looking about £50 just for a mag.

Made by the same OEM. I do wonder how many airsoft manufactures actually make guns rather than just rebrand.

Needs must if no one else has it.

Came through fine into UK but ups were a Ballache to deal with. it was about 3 weeks to get the thing out of customs to my door.

The TM doesn't really need up grading it shoots far enough and consistently enough to be competitive in woodland. Whole point of TM guns are that they are just well built guns that run consistently and reliably. If it wasn't for how much fun my recoil HK416 is the p90 would be my go to gun.

Going by reveiws the Novi is based on a CYMA which is TM clone. Do not get any of the sport lines especially classic army it's garbage. I personally run a TM RD with MAG 170RD mid caps( high caps are clever but prone to jaming). No experience of krytac or novritsch p90 but other than a mosfet cannot see what they offer over in this case the significantly cheaper TM.

Pretty much yeah

Google is your friend https://www.octagonairsoft.com/product-page/flintlock-workshop-x-toystar-k2-aeg-custom . You just won't get yhem.in the UK. I have imported from octagon before. Not brilliant communication or fast delivery but they did deliver.

You shouldn't leave co2 bulbs in the mag. co2 dries out the rubber seals.hope fully seals aren't damaged but I would soak them in silicon oil.

Yeah that's not right. Have you cleaned and lubed it? Might be causing issues

Is this a recent thing? Temperature drop means gas efficency will be down and once it gets down to single digits a lot of pistols will be next to useless. Simple answer is something Tokyo marui they have the best design/quality control and being mainly plastic they are much more gas efficient than the metal clones. If you want a 1911 the M45A1 is the most recent TM design and has very good efficiency for a single stack. I personal rate the HK45 Tactical. It's a double stack mag so large gas capacity. Grip is adjustable depending on hand size, controls are ambi, comes with a threaded barrel so can fit a pistol tracer. If you want to go cheap the AAP-01 is really good value for money and has massive after market support. They do gave a reputation for breaking though.

the fact you can get them would assume TM sorted them you couldn't get a TM Glock for a long time.

Can't add anything to the legal side of things, but regards the painting of the pistol depending on your skill level and which gun it is. it may not be possible to get a good finish either after stripping or painting over the two tone paint. It will certainly get you a better result just purchasing an OEM replacement (frame or slide)

Eclan for the look other wise pretty redundant on a support gun the idea is to suppress rather than aim. When I ran an support gun I had a tracer to get a general idea of range (honestly I do this with all my guns). I mixed same brand same weight tracer/standard bbs to be a little cheaper. I also tended to run .2g bb as accuracy really wasn't the goal.

According to Tokyo maruis Web site it's purely cosmetic.