BigStew

Just got an TM h&k 416 and want to run it on lipos. I have done a search and there appears to be a couple of plug in adapters but they run 20 to 40 quid. I have wire, connectors, shrink rap and a soldiering iron so want to know if there is a method to rewiring or should I just go with the conversion kits?

i get bored quickly. i only have like 10 guns at the moment.

I have no will power. Team mates got recoils so I got am H&K 416. Got an AA12 on the way

With airsoft very few manufacturer offer consistent quality control. For everyone that has nothing but praise for a brand/gun there are an equal number of people that will never touch that same brand/gun again. Buy the gun that ticks the boxes for you, look after it but expect it will break and if its after the first time you use it, the warranty means nothing. Airsoft is not a cheap hobby. After you get your first gun plan to get your next back up gun.

it will depend on the airlines policy regards firearms/replica fire arms. even if you have a valid defence they may not touch them with a barge poll or require a real steel locked case to transport a RIF so only proper answer you'll get is asking them.

7.4v yeah they don't need touching but the OP is talking about 11 1v with out a mosfet. You'll at least risk over spin in semi. Maybe damage trigger contacts.

Only if you run over powered gas on them. In 22 years I have never had a TM pistol slide break on me. pistols are only meant to be short range back ups they don't need high fps. If you want to out range AEGs then you need a MK23 Nbb.

Sadly the answer is maybe. It may drop in or you may have to sand it to get it to run. The tolerances just aren't good enough to say for certain. Not as interesting but you could put up a wanted add for a stock TM Hi Capa slide at least you know it will fit. Also if the slide is plastic you don't need to upgrade any parts

WE are clone-ish of TMs and its hit or miss whether parts are compatible. You might have luck contact WE directly.

Well you didn't buy a TM pistol so not really. the Umarex USP is a rebranded VFC who have a reputation for beautiful externals crap internals but their HK45 is meant to be good so maybe USP will be fine

Are this out fit still good to buy from?

I believe that classes you as a re enactor so technically yes but it will depend if a particular shop will except your membership. best to ask the airsoft shop rather than us.

TM AUG either the high cycle or standard are great guns. The cross bolt safety now comes with a third position that acts as a fire select as well as the progressive trigger. Not heard bad things about the Chinese clones just finish and tolerances aren't as good. They are easy to work on with a v3 gearbox which is only held in place by a few screws and can be pulled out the stock. You also have the fact it's take down so you can swap upper receivers and barrels. I personally have a fondness for a P90 red dot. Second hand wise a stock TM recoil scar is a fun gun. If you want something DMR CYMA M14 is great outthd box and relatively cheap. CYMA AKs are generally good as are their MP5s.

Looking for some help from WE M712 owners. Could someone give me the frame width, the height from bottom of mag well to top of receiver and length of receiver not including the barrel? Thanks

Wrong section

Honestly go with another TM springer. There are after market stocks available for the SPAS 12

what do you actually want to mount? scope, red dot, micro red dot? simplest option would be just to cut down the ris so the stock clears the ris when folded this will restrict the size of the optic. other option would be to tap the barrel shroud and screw a ris rail to it. honestly are you really going to have the stock folded in the field? the side mount will give you the most options for optics.

if you can find one CYMA M14 is an excellent AEG can be got for £150/170. I will add unless you live in the middle of nowhere with no neighbours back garden target shooting can get you in a lot of trouble.

communication is not brilliant, but never been ripped off by them

despite its size the TM Desert Eagle is a very good pistol. 1911 wise stick to TM and get a M45A1 as it has a more efficient system and larger mag gas capacity.

Just arse covering. Would not use an 11.1v lipo but a 7.4v with a higher than 15c rating will be fine.

Sounds possibly like you are short stroking when you pump the gun. If you don't pump with enough force and travel the loading mech can Jam. Ther possibility is that the charging arms are jumping out the guide rails that could mean something is damaged.

The KJ Works KC-02 GBBR is an airsoft version of the 10/22 but it is out of stock everywhere at the moment.

Really depends on your style of play. When I had a support gun 4500 a game day. Just using an aeg 800 to 1200 rounds a game day I used .28g BBs. Avoid blasters, neuprol bbs.

Ah didn't see that shit.