Tackle

Make: Genuine British Army surplus Black 75L Deployment Bag Holdall / Rucksack - used

Condition: Used - Grade 1 - used but all complete scuff, grubby mark, names / numbers on , really nice but may have names / numbers on Ill do my best to deliver it clean.

Price/Payment: £20 Posted buyer pays for paypal fee.

2 Available ( Item purchased may not be exactly like the picture but it will be in grade 1 condition)
British military issue deployment bag Black in colour - Used Graded condition end carry handle both ends with zipped pocket tough zip fastening holdall straps with velcro patch to join together to make it easier Rucksack straps to carry 2 velcro flaps to conceal the straps when not needed 3 top compression straps above the opening zip id slot with cover fold down top flap to cover the top of the straps side velcro patch pockets bottom plastic studs Grade 1 - used but all complete scuff, grubby mark, names / numbers on Super grade - really nice but may have names / numbers on Newer vertion of the bag only has 2 compression straps and no flaps on either end Styles do vary Thank you for looking.

Stay safe!

I have this here KJW/Novvy SSP01 mag. 
 
It's in good condition with not much in the way of usage marks. it has a Nineball Purple gas router installed and is gas tight. 
 
£16 posted. 

Hi folks,
 
Picked this up as part of a bundle, I already have 4 Glocks so this is something I'm looking to move on.
 
Everything seems to work as it should in regard to function and the mags all hold gas, though given the age I imagine everything would benefit from a once over from someone that knows what they're doing.
 
Doesn't have the weird rail section that looks to fit on the front, outside of that everything is present and correct (including paperwork, what I assume is a hop adjustment tool and what I assume is a speedload attachment of some description). Condition wise the photos below do a better job than I ccould do with words, I'd probably go with 'decent condition but definitely used'.
 
Looking for £120 including PayPal fees and postage.
 
Please note that I'm currently limiting myself to one post run per week, these tend to fall on Wednesdays.
 
All the mags will be emptied when packaging up for shipping and marked as 'empty/depressurised vessels', this is for safety reasons. Be sure to get some gas in them as soon as they arrive to best prevent leaks occuring, this is simply the nature of shipping GBB mags unfortunately.

Bought new but never used a couple of times in the garden so selling as not been used. Comes with RMR mount in the box. Fitted a maple leaf autobot 60 degree hop rubber

Make: WE

Gun/Model: PX4 SUB COMPACT BULLDOG BLACK

Accessories:

Original Box
1 x 25 / 1 x 15 rounds Magazine Leak free and 1 x 15 Leak free but in need of a new lip feed
Come with Six Different size and Color selective selective back straps
Instruction Manual

Condition: Used. Nice little gun with nice recoil. Metal slide and Polymer body. It needs a new hopup unit, the arm were the hop wheel sits broke. It still shoots fine but you cant adjust the hop.

FPS: 245

Price/Payment: £55 + £5 Post (Low price due to needing possibly a new hop unit)

Video available on request via Whatsapp.

Thank you for looking.

Stay safe!

New and unused Cyma P90 subgun.
I bought this solely to use the metal upper - as such this has a TM plastic upper on it.
Otherwise the gun is completely stock and hasnt even been fired.
 
Price covers PayPal fees, can post for £8, airsoft defence required.

Welcome Brave souls who have clicked on this advert. Obviously this pew is not for the faint of heart!
 
I built this for my wife after she finally agreed to try a game, one game in and she’s deemed it too heavy and has eyes on my M4!
 
The base gun is a Cyma M1A1 with a King Arms Silver metal body kit fitted. The original Cyma faux wood stock and grip have been Hydrodipped in a Carbon Fibre pattern and given a clear Cerakote top coat to keep the pattern intact for as long as possible. The rear sight block has been replaced with a Replica Sig Romeo red dot which is a surprisingly natural fit for quick target acquisition. Finally a real leather sling has been added as I wouldn’t trust the stock slings with anything of value! There are a couple of knicks in the finish on the stock that I’ve tried to photograph.
 
Internally, I wanted her to never be outgunned. It’s a standard Cyma V6, plastic bushings replaced with Modify V6. I fit a set of 13:1 gears and shortstroked three teeth on sector and the SHS metal toothed piston. The piston head was garbage so it got changed to a POM vented bearing  type from AK2M4. The Cyma nozzle was hilariously bad to it got changed to an O-ring type. Wiring loom replaced for standard Gate Mosfets and the Pew will be supplied with a Gate NanoHard. The bucking has been replaced with a G&G Green.
 
Hop has been set for 0.28g BB’s and it’s slinging them at around 290fps (+-350/0.2) the RPS is just over 20 with a 7.4 and just over 30 with an 11.1. There’s plenty of room in the stock for my largest nunchuck style lipo (11.1 2600)
 
The trigger response is super fast and the gun could make for a very unique CQB load out 
 
But Wait, there’s more!
 
Included are three Cyma Hicaps and a Cyma 450rd drum.
 
The case won’t be included, I needed it to get the pew to work to take some photos in decent light.
 
Contact me if you’d like to pick my brains about any of the work on the internals. Price includes next day tracked delivery 

**COLLECTION ONLY - WEST LOTHIAN**

Fidragon 36" black padded gun bag - £10.
 
Can hold up to 2 primaries in one internal compartment with velcro straps to secure (model/size dependent). I had an AK74MN and an AKS74U stored in this for example.
Also has secondary compartment on front with space for carrying magazines. 4 pockets inside, but more can be fitted either side. Elastic cumberbund within to help secure mags.
Has carry handles with velcro closure if you want and a carry strap on the rear to sling over your shoulder when walking from car to safe zone.
 
Too large to ship without considerable hassle/expense, hence collection only.
Used, like new and good quality item.
Located near Bathgate, West Lothian.

Make: Ares Amoeba

Gun/Model: AS03 - Sawn Off Striker Sniper Rifle

Accessories: 

1 x Magazine

Condition: Like new. really amazing portable sniper.

FPS: 400 on .20

Splits/Swaps/Part Exchange: 3XN

Price/Payment: £100 + £10 p&p

Thank you for looking.

Stay safe!!

Toystar K-2 AEG and Accessories for sale,
including all components showing in pictures
This is Daewoo K-2 Rifle AEG model, manufactured by Toystar.
Original product was made of plastics but I partly replaced some parts with metals to use this one for airsoft game.
 
 
Components
 
Toystar K-2 AEG w 20mm Rail ( Bought in July 2020 ) - Clean Condition, used in field two times Metal parts ( Replaced in March 2021 ) - Barrel, Gas tube, Front sight, Rear sight, Gas blocker, Flash hider & Ring, Delta ring, Hand guard 8 ring, charging handle, magazine catch, Trigger guard, Front body pin Ares Amoeba EFCS Gear Box ( Bought in July 2020 ) - Please read Defect section, used in field two times SHS High Torque Motor ( Bought in July 2020 ) - Great Condition, no damage, used in field two times ZCI Tight bore 6.02mm inner barrel ( Bought in March 2021 ) - Great Condition, no damage, haven't used in field G&G Hop-up Rubber ( Bought in March 2021 ) - Great Condition, no damage, haven't used in field Aimpoint M4S replica ( Bought in July 2020 ) - Clean condition, top cap has loosen, used in field several times VX Viper Sling ( Colour : BK / Bought in Sep 2020 ) - Great condition, no damage, used in field several times Revision Sawfly Ballistic Goggle ( Colour : BK / Bought in Dec 2019 ) - Clean Condition, no damage, used in field several times 60rd Pmag ( Bought in Dec 2019 ) - Great Condition, no damage, haven't used in field 190rd Marui short magazine ( Colour : BK / Bought in Dec 2019 ) - Clean Condition, modified for K-2, used in field several times 19+@rd stanag type plastic magazine ( Colour : Red / Bought in Dec 2019 ) - Basic magazine BBs ( March 2020 ) - 0.20, 0.25 Begadi Rifle case ( Colour : Black / Bought in Sep 2020 ) - Clean Condition, no damage, used several times  
* Paypal fee is not included in price
* If you need more photos and informations, please feel free to contact
 
Defects
Motor connecter of red lead has broken Can't rotate selecter 360', it stucks near safe mode, I guess gear box is not perfectly match with body Doesn't have front lanyard ring  
Shipping
 
Sorry, shipping not available, because there is no box fits for this gun and case(92x36cm)
Collection Only
 
 
Contact
 
Please feel free to contact with me via personal messenger. Thanks.
 

Hey hi hello. Here is one design of a few railed outer barrel extensions I've been working on for the AAP-01 GBB airsoft pistol.
This is a replacement for the original outer barrel and uses the same screws so make sure you have those hand.
 
So recently I've had a bit of a personal dilemma. I've always wanted to experiment with a DMR kit/extension but I've always hated the most common ones out there. 
Their pseudo-futuristic-frankenstein appearance just really doesn't do it for me and I love my AAP-01 far too much to taint it that way.
 
What I do like however is Big. Chonky. Hand Cannons. Especially the Desert Eagle.

Which is where I got the idea for this design.  I wanted something sleak enough to serve as a standalone pistol but long enough for a potential DMR loadout whenever I felt like slapping a stock and a foregrip on without it looking like some rejected Battlefield 4 concept art or just a simple afterthought. 
 
My crap patter aside here's a look at the unit itself:

- This replaces the pistol's default outer barrel so make sure you're familiar with how to remove and replace that first. (Its not difficult, its just a two different types of hex head screws).
- Outer barrel length is approximately 178mm in length. (it fits the official Action Army 200mm inner barrel with a bit of room to spare.)
- Outer barrel width is 30mm. 
- The top rail is about 235mm in length
- The bottom rail is around 169mm in length.
- Printed in PLA at 50% infill. Sturdy but not unbreakable. Its not CNC Steel so don't go treating it like it is.
- Lightweight at approximately 180g (according to filament used in Simplify3D)


 
PLEASE NOTE THE FOLLOWING BEFORE YOU BUY:
These are made to order. I will always try to get UK orders sent out first but as I have this listed on more international sites I get a lot of attraction from yankee airsofters across the pond which clogs up my work load. Please allow for 4-7 days production but if its urgent feel free to drop me a message prior and I'll see what I can do. 
 
The stand out bit of the top rail is a weak point due to it's dimensions and will most likely break if mishandled or dropped especially if you have a large optic mounted there. If it does snap off the barrel can still be secured without that top screw mounting point and I'm actually going to list a version without the sticky-outy top rail in the future because it can be paired with the official Action Army AAP-01 top rail and secured together with the optic's mount or a rail riser for a full front-to-back top rail.
 
The sloped end of the muzzle has an imperfect finish which is unfortunately unavoidable due to the way it has to be printed with supports but I know it can be done better so I'm always looking into ways to lessen its ugliness. I've tried to show this in one of the images. The best fix for this is to sand it down gently with some 300-500 grit sandpaper then buff it out and repaint it.
I'd advise painting it to match your AAP-01's top slide/receiver portion anyway for a nice uniform look.
 
 
 
 
If you have any questions at all feel free to ask

Feel free to check out my lacklustre facebook page; https://www.facebook.com/VonGrimmArmoury
(If social media links aren't allowed just give me a slap and I'll remove it)

hello everyone! I am French.... and yes no one is perfect! I am desperately looking for detachable parts to reassemble my M60 someone would have it thank you in advance

Bit of an impulse purchase over a month ago, this is literally brand new, and hasn't fired a single BB, or had any C02 cartridges plugged in.
 
I originally wanted to turn it into something funky and sci-fi looking, but I'm going to be seriously slimming down the airsoft collection moving forward.
 
This is the Gen 2 with the adjustable hop up and green fibre-optic style sights.
 
£60 posted, payment by PayPal Goods and Services for your own benefit.
 

Bought this gun a long while ago and im a little reluctant to part with it. Problem is its in such nice condition that I dont want to skirmish it incase I scratch it and I dont like having guns that dont actually see any use. The holster is a custom one made by me with a soft suede lining. The gun is in near perfect condition and comes with the original box, speedloader and fill tube. Price includes fees and postage.  

Selling parts most o them as new.
 
 
G&P M4 Stock DE with Pad, modified to hold a 7,4 Lipo in the butt pad for rifles like NGRS MARUI  -  24 GBP posted
Night Evolution Rifle torch DE, with strobo : works with 1 CR123 battery included   26 posted,
Visionking scope flip up lens covers 49mm & 36mm - 7 posted for both
 
 

Classic Army G36 long barrel. All in good great condition no damage etc, gearbox, hop unit and barrel and wiring all seem good, needs a little bit of work to finish off. Comes with second hand working motor and new motor cage, these need installing/connector to the gearbox that’s in the rifle. Needs front handrail body pin as missing and stock rubber butt pad as missing and left fire selector missing. What you see is what you get. 
 
postage is £10 as it’s a large item and buyer to cover PayPal fees if using ‘goods or service. Cheers 
 
 

L1A1 S.A.W.E.S sight (Small Arms Weapon Effects Simulator)
I have this in the original box that goes with it.
It takes a 9V sqaure battery however this is untested.
Class 3a pulsed laser.
11mm dovetail mounting system
2x scope susat style
Dated 1985
Really cool and interesting bit of kit
I did intend to put this on a VSS to make a weird post apocalyptic build but it never happened
£90 posted or make me an offer

Herd we have a aps uar that has been rewired back to the rear as was front wired for some reason.
There is 1 issue known of which is tge spring in mock cocking handle is missing so needs sorting.
 
Has a micro rds (69.99)
3 mags 
Lipo 7.4v battery 
Sound hog 
Ppstage is included but Not paypal

TRMR for sale. Comes with the insert to run .209 primers, 9mm and 12g shells. Also has a kydex holster. £130 all in 

All metal, gas-powered shotgun. Metal foregrip attached to an M-lok hand guard, with rail and QD sling point attachment. Capable of 3 or 6 round shots from the 30-round TM-style shotgun shells.
 
Gun has not been skirmished (mainly due to lack of opportunity in the time since I bought it) and is, sadly, virtually unused.
 
There is a small scratch (pictured) that was on the gun when I received it. Apart from that the finish is fantastic.
 
Supplied with the three original Secutor 30-round shells, four additional Nuprol shells, Velcro cartridge holder, speedloader and cleaning rod.
 
£140 includes Parcelforce express48 delivery.

Make: ICS

Gun/Model: M4 Full Metal Anniversary 2006

Accessories:
External:
6 x Ares M4 Mid-Cap Magazine 140Rd
UTG 4.2" ITA Red/Green T-Dot Sight, 38mm Tube, Riser, Quick-Detach Mount
G&G SOPMOD Stock for GR16/M4/M16
NOVESKE FREE FLOAT HANDGUARD RAIL 10" RAS RIS OPEN TOP
Magpul RVG® - RAIL VERTICAL GRIP PICATINNY
US SOCOM Logo Suppressor 14mm CCW (196mm x 36mm)
Attached metal spare magazine holder (see picture) used to accommodate battery
NUPROL 7.4v 1200mAh LiPo Stock/PEQ Battery

Internal:
Maple Leaf Inner barrel
Maple Leaf Rubber & Nub

Condition: Used

FPS: 310 fps

Splits/Swaps/Part Exchange: 
Looking to swap. What do you have?
 
Thank you for looking.

Stay safe.

Secutor Velites G·VI 
Green gas shotgun hpa tapped currently. 
Includes 5 shells can add an m4 adapter for extra. 
Cover on receiver removed and missing did this so easier to change from 3 to 6 shot. 
£140 posted. 
£170 posted with m4 adapter. 

Here I have a lovely CQB weapon, a Tokyo Marui MP5K. Well built and reliable piece of kit. Used condition with plenty of skirmish marks, but still a great gun.
 
Bought as a project but I might not keep it - in which case, I'd rather it went to someone who will look after it. It will be cleaned and regreased before shipping. 
 
Includes six 200rd hicap mags. Rear wired with Deans connector, fitted with scope rail and M4 stock tube with fixed lightweight stock.
 
£150 ONO - in no hurry to sell. Payment via PayPal or cash on collection from Woking, Surrey.

Condor modular set, an all in one rig RRV style with split front. Inc 6x mag pouches, hydration pouch, 2, Velcro pockets
As new with no damage I’ll also throw in a free low profile triple mag pouch  – £40
 
Emersongear AOR2 gen 3 trousers W38 L34 as new - £30
 
Helikon CPU shirt shadow grey as new  XL – £25
 
None have been skirmished and are new but without labels
 
All prices + PP fees and postage or I can arrange meet in Manchester / Cheshire area 

Make: Ares

Gun/Model: Striker AS03 OD

Accessories:
1 x Original Box
3 x Ares Mags
1 x Marchwood 4×32 Scope
1 x Ares Flash Hider adapter
1 x M-Lock rail
1 x Speed Loader

Upgrades:
Gunsmithy Pro Strike Hopup Arm + Rubber Nub
Original parts included

Condition: New.

FPS: 395 on .20g & 325 on .30g

Splits/Swaps/Part Exchange: N/Y/Y

Price/Payment: £110 + £15 for Parcel Force 48h and PayPal
£110 Collected Manchester or Bolton