Asomodai

Step one of XM8 DMR build. The most important thing, aesthetics. 5 inch barrel extension from @ak2m4
 
 

Guarder Strap for my big bugger A&K MK43 

Step one of XM8 DMR build. The most important thing, aesthetics. 5 inch barrel extension from @ak2m4
 
 

I am such a clutz and force my way through so much hedge on the average skirmish that I cant help that think everything will fall out. 

For my birthday the missus has purchased me another AirsoftPro G36 Hop unit, making it my 4th one and its going in my new XM8

in my experience they do, can't beat a velcro flap for knowing your mag's gonna be there when you need it.

For my birthday the missus has purchased me another AirsoftPro G36 Hop unit, making it my 4th one and its going in my new XM8

For my birthday the missus has purchased me another AirsoftPro G36 Hop unit, making it my 4th one and its going in my new XM8

For my birthday the missus has purchased me another AirsoftPro G36 Hop unit, making it my 4th one and its going in my new XM8

I'll be honest, I haven't much experience of motors outside of stock ones or the Rocket Green 16/22TPA and the SLD 22TPA.
 
The SLD is good for builds where you are going to short stroke or DMR, it's a bit slow for an aftermarket motor if using with a standard gearset, but it has all the torque you need to pull a heavy spring for short stroking etc. For best performance use with a 9.9v life or 11.1v lipo. The screw down tabs are quite long and I had to dremel out part of a V6 gearbox to be able to set the motor height. It's also a little noisy, so I wouldn't use it for quiet builds. 
 
The Rocket green TPA is my favourite motor, it's relatively cheap, very fast and relatively quiet has a good amount of torque for a 16TPA. Cant fault it and it's quite good for both short stroking and standard gear sets. 
 
The 22TPA version is incredibly powerful whilst still being fast and should only be used in DMRs and shortstroked builds, even when used on a 7.4 lipo it was over spinning my standard gear set F2000 double shot on semi. 
 
My favourite stock motors are the SRC Neo Magnatar series which has a surprising amount of torque and whatever S&T put in their ARX160s (Has the same can as the SLD but less Torque more speed) not sure if its Neo but is a good ferrite if not. 
 
One motor that completely surprised me was when I swapped out a Standard JG ferrite in my MP5 is the TM EG1000 ferrite and it goes like absolute stink on a standard gearset and 7.4 lipo, it needs to be heard to be believed. Goes to show that the EG1000 is still a very viable motor for standard builds. 
 
So my opinion is to spend a little extra over the tempting SLD and go for the Rocket Green. It's incredible value and according to Sam of KOA fame it's almost as good as an Action Army 40k. 

For my birthday the missus has purchased me another AirsoftPro G36 Hop unit, making it my 4th one and its going in my new XM8

I'll be honest, I haven't much experience of motors outside of stock ones or the Rocket Green 16/22TPA and the SLD 22TPA.
 
The SLD is good for builds where you are going to short stroke or DMR, it's a bit slow for an aftermarket motor if using with a standard gearset, but it has all the torque you need to pull a heavy spring for short stroking etc. For best performance use with a 9.9v life or 11.1v lipo. The screw down tabs are quite long and I had to dremel out part of a V6 gearbox to be able to set the motor height. It's also a little noisy, so I wouldn't use it for quiet builds. 
 
The Rocket green TPA is my favourite motor, it's relatively cheap, very fast and relatively quiet has a good amount of torque for a 16TPA. Cant fault it and it's quite good for both short stroking and standard gear sets. 
 
The 22TPA version is incredibly powerful whilst still being fast and should only be used in DMRs and shortstroked builds, even when used on a 7.4 lipo it was over spinning my standard gear set F2000 double shot on semi. 
 
My favourite stock motors are the SRC Neo Magnatar series which has a surprising amount of torque and whatever S&T put in their ARX160s (Has the same can as the SLD but less Torque more speed) not sure if its Neo but is a good ferrite if not. 
 
One motor that completely surprised me was when I swapped out a Standard JG ferrite in my MP5 is the TM EG1000 ferrite and it goes like absolute stink on a standard gearset and 7.4 lipo, it needs to be heard to be believed. Goes to show that the EG1000 is still a very viable motor for standard builds. 
 
So my opinion is to spend a little extra over the tempting SLD and go for the Rocket Green. It's incredible value and according to Sam of KOA fame it's almost as good as an Action Army 40k. 

Another order from @ak2m4. Part one of two eventual orders to fix various issues with existing and incoming RIFs. 
 
2 x Acetech Mosfets to replace my Pico Gate AB ones in the SL8 and XM8. I cant trigger spam with the gate without locking up. 
 
1 x 5 inch outer barrel extension for my XM8 DMR plan. 
 
1 x Maple Leaf 60 degree VSR bucking. Replacing a 70 degree one to see if I can lift .48s on my troublesome bolty. 
 
1 x ZCI 363mm 6.02 inner barrel. My newer XM8 is mechanically sound and shooting at a healthy 330 FPS, this should take me closer to 350 and tighten up the grouping. 
 
 
 

I was looking for something like that for my PDR-C. The Russian style We-Con just doesnt quite suit. 
 
Maybe i'll just get one of those cheapy Kral Aria Wide RDS's which are only a fiver. Bit worried it will be too low on the rail though. 
 
 

The JG G36c brand new from Gunfire costs £113 with postage to the UK (Even cheaper with the solid stock version) and the P90 not much more.... So not sure how your argument helps? 
 

I guess if you cant justify your pricing you dont really want to discuss it. Sorry you must have got burned buying these rifles in the first place at whatever inflated price you got them for, but its no excuse to knowingly charge those price to someone who could be gullible. 
 
A silencer can be had for as little as 6 quid same with the mag. Why would anyone buy a sprayed, second hand (possible ex two tone) G36c, when they can get a new one for much less? 
 
Ok, Phenix in France are doing the P90 for 115 quid add an additional 20 for shipping and its still priced under your second hand one. 
 
https://www.phenixairsoft.com/en/air-spring-rifles/18126-cyma-p90-ris-dominator-w-silencieux-cm060h.html
 
 

The JG G36c brand new from Gunfire costs £113 with postage to the UK (Even cheaper with the solid stock version) and the P90 not much more.... So not sure how your argument helps? 
 

The p90 is out of stock so you can’t buy it at that price anyway. And the G36c comes with silencer and an extra magazine. 
 
But you know what mate if your not interested that’s fine, but I can’t be bothered to keep going back and forth with you  have a nice day

This guy has posted a few things for dearer then second hand.
 
 
105 quid for the P90 at Gunfire on sale. Or 145 normal price. 
 
https://gunfire.com/en/products/cm060h-submachine-gun-replica-1152218248.html
 
99 quid for a Black JG G36, or 80 odd for the tan brand new. His looks like it has been  sprayed as well.
 
https://gunfire.com/en/products/jg0638-v2-subcarbine-replica-black-1152189535.html
 
 
 
 

This guy has posted a few things for dearer then second hand.
 
 
105 quid for the P90 at Gunfire on sale. Or 145 normal price. 
 
https://gunfire.com/en/products/cm060h-submachine-gun-replica-1152218248.html
 
99 quid for a Black JG G36, or 80 odd for the tan brand new. His looks like it has been  sprayed as well.
 
https://gunfire.com/en/products/jg0638-v2-subcarbine-replica-black-1152189535.html
 
 
 
 

S&T Tavor OD professional.
 
https://www.crownairsoft.com/collections/rifles-assault-rifles/products/t21-carbine-a-e-g-with-e-b-b-odprofessional-version
 
Only 95 quid but with 55 quid shipping. 

S&T Tavor OD professional.
 
https://www.crownairsoft.com/collections/rifles-assault-rifles/products/t21-carbine-a-e-g-with-e-b-b-odprofessional-version
 
Only 95 quid but with 55 quid shipping. 

This just arrived from Italy. My second new old stock SRC XM8 gen 2. 

MG36 project has now been completed with the addition of the C-Mag auto winding magazine. Had to take it apart twice already to look at how it works and how to unjam if needed. Hopefully will be using this on the field soon! 

MG36 project has now been completed with the addition of the C-Mag auto winding magazine. Had to take it apart twice already to look at how it works and how to unjam if needed. Hopefully will be using this on the field soon!