Jump to content
Updated Classifieds rule 5 - username and date in photos ×

Asomodai

Members
 View Profile  See their activity

  • Posts

    3,093

  • Joined

  • Last visited

  • Days Won

    35

  • Feedback

    100%

 Content Type 

Everything posted by Asomodai

  1. Asomodai

    Stuck an SLD High Torque 22TPA motor in my stock ICS L85 (Which had the anaemic ICS Infinity 2000 in it.) ROF is a little bit better, the response has improved a fair bit and it doesn't sound like a weak old man going number 2 for a change! 

    1. nathan13n

      nathan13n

      I was looking at dropping on of these into my srs. How are you finding the motor? You got it from Ak2M4? 

    2. Asomodai

      Asomodai

      The motors seems solid enough. Be wary though, the screws that keep the armature in the can had a very long head and I had to dremel into my CYMA P90 gearbox to get the motor to sit low enough. 

       

      Its not easy to replace the screws either because its partially threaded and longer then most I have seen. 

       

      This is a torque motor, so great trigger response, but slow rate of fire.

       

      And yes I got it from there. 

  2. Asomodai
    Aftermath of a SEXY Chrono Party. FPS Results with no hop: TM AUG High Cycle: 275FPS TM FAMAS F1: 349FPS ICS L85A2: 330FPS Umarex ARX160 Sport line: 336FPS CYMA P90: 336FPS ICS CXP-15 M4: 347FPS Both pistols had hop on, more on the SW TM M9: 234FPS on 144a and 272FPS on Ultra TM Strike Warrior: 204 on 144a and 246FPS on Ultra Missing half of the collection through modification and repairs. Currently receiving care are the Umarex GBBr Tavor, JG MP5, TM FAMAS F1/SV Hybrid, CYMA F2000, SRC XM8, TM KSG and JG SL8 DMR.
  3. Asomodai

    It's here, it's here! 

    Need to Dremel the legs and rear sight down to fit though! 

    49555781_10156706877770560_995882674037981184_o.jpg

    1. Immortal

      Immortal

      interesting looking thingy

  4. Asomodai

    Next site to review has been chosen. Lift has been procured for this Sunday! 

    1. Show previous comments  2 more
    2. DopeYourScope

      DopeYourScope

      Ah sounds interesting. I decided to book on for an Apocalypse game day as it's my local field.

    3. Prisce

      Prisce

      Where you heading?

    4. Asomodai

      Asomodai

      Still haven't decided. But will PM you when we decide. Announcing ahead of time just gives the game away to the site organisers ;-).

       

       

      @DopeYourScope I did love the game area of Apoc, one of the best in Kent. But needs improving on the organisation. 

       

      We would like to go back on day. 

  5. Asomodai
    Lonex P90 Air Nozzle.
  6. Asomodai

    Its amazing how much an aftermarket nozzle can screw up feeding. But also how much FPS you can lose going back to the original one!

     

     

    1. Show previous comments  2 more
    2. Adolf Hamster

      Adolf Hamster

      well who have you got to blame for that ;) :P

    3. Asomodai

      Asomodai

      Pro Airsoft for selling a Proline CXP15 for only 120 quid!

    4. Adolf Hamster

      Adolf Hamster

      Good comeback, i'll accept it lol

  7. Asomodai
    https://gunfire.com/en/products/xm26-shotgun-replica-1152208906.html Gunfire are selling this shell ejecting xm26 for about 80 quid. Very good price!
  8. Asomodai
    EhobbyAsia sent me an email saying they couldnt provide the stock of some items. (5 G36 midcaps, 1 MP5 RDS, 1 AUG Highcap, 1 Guarder barrel) So ordered ZCI 407mm 6.02 barrel to go in my ARX160 Acetech Mosfet to go in the ARX160. Also ordered Pistol retention strap Guarder G36 Cylinder/piston set. Just have to get the mags some other time and I can live without the RDS.
  9. Asomodai

    Anyone with transport going to a Skirmish within the next month around London/SE area? My battle buddy wont be able to play this month and relying solely on public transport to get to new sites means I am very restricted. I can meet you at any London underground/overground station to get to you at a rail or underground station. I can pay petrol money and bring my good cheer! 

    I can do Saturdays and Sundays. 

     

    Cheers for reading :)

    1. Show previous comments  2 more
    2. Robert James

      Robert James

      Im in Enfield pal. If youre in Cheshunt i can pick you up

    3. Asomodai

      Asomodai

      That sounds great mate. Lets make it a date :)

    4. Robert James

      Robert James

      Ping me your address when you have time, also Bring your own food and drink as there is no catering. 

  10. Asomodai
    ICD Tactical rail handguard for MP5SD types. Ugly as sin but the only bonified rail system available anymore. Two Prometheus purple buckings.
  11. Asomodai
    Just picked up the only CW 14mm tracer unit I could find in the world and in stock. https://www.davescustomairsoft.co.uk/Weapon-Accessories/Flash-hiders-and-Suppressors/FMATracer I am one happy chappy as this will fit on my JG MP5 SD. Its not quite fat enough, but happy to take that compromise!
  12. Asomodai
    I'd like to know how you get on with this as well. I am looking to do the same with my JG.
  13. Asomodai
    260mm ZCI Barrel for my P90 229mm ZCI Barrel for my MP5SD6 M110 Spring to see if I can avoid short stroking my ICS CXP by another tooth.
  14. Asomodai

    Are ZCI Barrels an upgrade over stock TM ones?

     

    I have read fairly decent reviews. I usually buy exclusively Laylax Prometheus barrels. But as I get more guns, the upgrade costs rack up. Looking to put new barrels inside my P90 and JG MP5. 

    Is the Laylax worth the more then double cost? 

     

    Did you find much difference between the two?

    1. Show previous comments  1 more
    2. L3wisD

      L3wisD

      @ak2m4 can tell you. Peter's been selling them for ages with good reviews. How they stack up to stock TM though, I don't know.

    3. Iceni

      Iceni

      Never had a stock TM to compare one with.

      What I do know is they beat most stock 6.08 JG/Cyma/APS barrels. There about the same as an LCT 6.02.

      You can polish them and they get better if you do that.

      If you are in doubt ask @ak2m4 He sells enough of them to know what's what with inner barrels.

      There certainly better than anything made from alumimiun. I'd have a ZCI over the like of a madbull any day of the week.

      If you really wanted an upgrade you might get one of the newer polished tolleranced Lambda barrels from ak2m4. Those should certainly be an upgrade. The 6.05 lambda 5 with the 1 micron finish should outperform pretty much all stock barrels out there if the polish is right. At £40-50 I will be taking a punt on one the next time I need an upgrade.

      https://www.ak2m4.co.uk/internal-parts/inner-barrels/lambda-five-aeg-inner-barrel-363mm
       

    4. Asomodai

      Asomodai

      Cheers guys. 

       

      I forgot AK2M4 sold them. I have picked up one for my P90 and one for my MP5. 

  15. Asomodai
    This is long awaited for me. EBay have a 15% off voucher til midnight tonight so finally picked up this badboy. Real Steel FAMAS full length scope Mount. It will need some dremelling to fit, I have never seen this particular rail mentioned in any English speaking Airsoft forums. A cool 140 quid direct from France.
  16. Asomodai
    Still had to dremel it to fit!
  17. Asomodai
    I just came. Lonnnnng Boi
  18. Asomodai
    Picked up quite possibly the worlds most expensive metal delayer chip. The King Arms one for £12. Also a plastic Lonex one and a set of rare Guarder ALICE clips.
  19. Asomodai

    Some work has been done on my P90 build. Come into a couple of potential issues though! 

     

  20. Asomodai
    Damn. Nice price. Where did you snag that?
  21. Asomodai
    Purchased some more parts from Ehobbyasia. That sale is addictive! Apple Airsoft ARX160 Air Nozzle ARX160 Long style outer barrel Guarder 6.02 407mm inner barrel (For ARX160) Element Aimo MP5 RDS 2x APS Aug High caps 6x G&P 130 G36 Mid caps UFC V3 metal bearing spring guide. P90 extended butt plate. Element aimo 2x42 scope for my DMR
  22. Asomodai
    I can bodge it if I accidently break the feed tube. I got a supplier for a spare hop unit if needs be as well!
  23. Asomodai
    The ARX160 has arrived. Seriously has the worst feeling ABS plastic (Similar to my TM Famas). Feels flimsy. But the plus side is that it is incredibly lightweight for the size which is more important to me. Everything else seems fairly solid. Decent high torque motor, good sounding gearbox, Hop unit seems flimsy but have worked out how to release the barrel and hop unit with just one external switch. 5 minute hop bucking change is pretty easy with this! Haven't fired it beyond dry firing but seems fine otherwise! Worth the 105 quid considering how unique it is. I just wish they did the Elite version in Tan! If you want the best rifle for your money and don't care about being unique, go for a JG G36. @Skara Edit: The Hi cap mag it came with broke within 2 shots. My ICS Hi cap then broke straight after, which was random, fixed it and all works fine now. It wont fit PTS style midcaps. Chronos at 318 with the hop on with a 6 +/- Variance and 328 with hop Off with 6+/- Variance.
  24. Asomodai
    I couldn't be bothered to return it if it arrived faulty. It'll get gutted and upgraded before I play with it anyway . I should receive it on Thursday! Did the cylinder get knackered?
  25. Asomodai
    Verrrrry interesting. If I can never get around to affording an SRS silverback then i'll have to consider this!
×
×
  • Create New...