-
Posts
679 -
Joined
-
Last visited
-
Days Won
17 -
Feedback
100%
Reputation Activity
-
mightyjebus got a reaction from Cocha in Marui G36c+
Valid comments however Army made a nice clone of the recoil M4's (I've got one here that works a treat) and CYMA knocked out a recoil AK which was slightly better than the TM version because it took normal AEG AK mags straight out the box.
I still think TM lead the way as all the other innovations have either been expensive, failed or both. Systema PTW, ICS split gearbox, GBLS, TOP shell ejecting AEG to name a few.
Now it's unlikely TM will be reading this but just in case, hurry up and make a recoil G3 and stick a mosfet in the M4 recoil platform.
-
mightyjebus got a reaction from BigStew in Marui G36c+
No, it's a copy of the original type 3 AK recoil from TM. It's a CM.046 if you want to check it out.
-
mightyjebus got a reaction from rj1986 in What have you just 3d printed (for airsoft)
I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.
-
mightyjebus got a reaction from PopRocket123 in What have you just 3d printed (for airsoft)
I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.
-
mightyjebus got a reaction from johnnyj in What have you just 3d printed (for airsoft)
I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.
-
mightyjebus got a reaction from sp00n in What have you just 3d printed (for airsoft)
I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.
-
mightyjebus reacted to HuttArmouries in What have you just 3d printed (for airsoft)
Looks good! Though I had to do a double take at first. That sling made me briefly think it had a thumbhole stock on it XD
-
mightyjebus got a reaction from HuttArmouries in What have you just 3d printed (for airsoft)
thinking about getting a rail extension for my Scar so I printed a 3D version to see if I like the look.
-
mightyjebus got a reaction from Enid_Puceflange in What have you just 3d printed (for airsoft)
thinking about getting a rail extension for my Scar so I printed a 3D version to see if I like the look.
-
mightyjebus got a reaction from gavinkempsell in What have you just 3d printed (for airsoft)
thinking about getting a rail extension for my Scar so I printed a 3D version to see if I like the look.
-
mightyjebus got a reaction from RostokMcSpoons in New Double Eagle UTR DRP9 ... tidy little SMG with new feature
I like it. it's a Striborg SPG9 which is unofficially known as the poor mans ARP9 but seems well liked by the shooting community in the US. I made a 3D printed version a while back.
-
mightyjebus got a reaction from Egon_247 in What have you just 3d printed (for airsoft)
did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
Next up I printed some of the impact grenades in a luminescent filament I had floating around.
and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.
-
mightyjebus got a reaction from Jacob Wright in Tokyo Marui MP5 NGRS SMD identification
so good news and bad news. I replaced a few more parts and managed to fix the ECU. It ran for about 1 mags worth of BB's and died again once I did a bit of rapid semi auto.
*EDIT*
So I stripped it down again and luckily the motor connector had come away from the motor and once reattached the MP5 is now running fine. I'll give it a run out next weekend to see if it holds up.
It's looking like I fixed the ECU.
-
mightyjebus got a reaction from sp00n in What have you just 3d printed (for airsoft)
did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
Next up I printed some of the impact grenades in a luminescent filament I had floating around.
and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.
-
mightyjebus got a reaction from Scythian in What have you just 3d printed (for airsoft)
did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
Next up I printed some of the impact grenades in a luminescent filament I had floating around.
and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.
-
mightyjebus got a reaction from DanBow in Gun picture thread
Bought the S&T HK416 PDW with the idea of stealing the front end for my TM 416C recoil but sadly the rail doesn't fit. Since that meant I was keeping the S&T in one piece I binned the terrible PDW stock with a HK marked stock I had floating around and stuck on some HK iron sights as well. turns out it's quite a nice budget AEG.
-
mightyjebus got a reaction from GenuineGerman in Gun picture thread
Bought the S&T HK416 PDW with the idea of stealing the front end for my TM 416C recoil but sadly the rail doesn't fit. Since that meant I was keeping the S&T in one piece I binned the terrible PDW stock with a HK marked stock I had floating around and stuck on some HK iron sights as well. turns out it's quite a nice budget AEG.
-
mightyjebus got a reaction from BigStew in What have you just 3d printed (for airsoft)
did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
Next up I printed some of the impact grenades in a luminescent filament I had floating around.
and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.
-
mightyjebus got a reaction from Enid_Puceflange in What have you just 3d printed (for airsoft)
did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
Next up I printed some of the impact grenades in a luminescent filament I had floating around.
and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.
-
mightyjebus got a reaction from gavinkempsell in Gun picture thread
Bought the S&T HK416 PDW with the idea of stealing the front end for my TM 416C recoil but sadly the rail doesn't fit. Since that meant I was keeping the S&T in one piece I binned the terrible PDW stock with a HK marked stock I had floating around and stuck on some HK iron sights as well. turns out it's quite a nice budget AEG.
-
mightyjebus got a reaction from Scythian in What have you just 3d printed (for airsoft)
I just used a bunch of old aeg springs I have floating around. doesn't seem to need a M110.
-
mightyjebus got a reaction from ak2m4 in What have you just 3d printed (for airsoft)
update on the grenades, I had 3 break, friends steal 5, had one go off in my hand killing 9 of my teammates which was a comedy gold moment and generally they performed as well as I hoped they would. I'm going to knock up another load (and increase the infill on the parts that broke).
they cost about £1 to make and I can't fault them.
-
mightyjebus got a reaction from ak2m4 in What have you just 3d printed (for airsoft)
Building a load of these impact grenades. It cost's about £1 to make and they work flawlessly.
big shout out to the original designer (FULCRUMAIRSOFT) and the files can be bought here:
https://cults3d.com/en/3d-model/game/airsoft-micro-grenade-impact-cap-gun-ring-sound-grenade-meteorite-meteor-lite-e-fulcrumairsoft
-
mightyjebus got a reaction from HappyFox in What have you just 3d printed (for airsoft)
update on the grenades, I had 3 break, friends steal 5, had one go off in my hand killing 9 of my teammates which was a comedy gold moment and generally they performed as well as I hoped they would. I'm going to knock up another load (and increase the infill on the parts that broke).
they cost about £1 to make and I can't fault them.
-
mightyjebus got a reaction from HappyFox in What have you just 3d printed (for airsoft)
I found that by flipping the spring over (i.e. what was at the top is now at the bottom) fixes that issue.
I ended up printing 10 of them and I also found that my Quake impact deadly customs holder is a good fit.