![](https://airsoft-forums.uk/uploads/set_resources_70/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
rj1986
-
Posts
552 -
Joined
-
Last visited
-
Days Won
2 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by rj1986
-
-
-
On 24/06/2021 at 05:48, rocketdogbert said:
Nice, but pricey
Describe Archwick, without using the word Archwick
-
-
Thread revival time - any suggestions on where I can get extended magpul butt pads printed?
-
-
15 hours ago, Shamal said:
Wow! Is there not a chance that would blow your eyeballs out! Looks v powerful 👍👀
I'm trying to work out a way to keep the pressure up. If i put the fan exhaust next to the goggles, or run a very short tube, its like a leaf blower, but when its tubed up the pressure drops to the equivalent of a person exhaling, which to this point has been enough.
If i tape the box up, theres not enough airflow coming in for the fan to work.
So thats my next thing to tinker with.Or try with 2 smaller fans in a series circuit, but last time i ran out of time, tubing and patience
-
-
17 hours ago, Tactical Pith Helmet said:
When I rode bikes for a living, I often advised the new lads to wipe the inside of their visor with a raw onion.
Was that an actual suggestion or was it a can of headlight fluid and pack of skyhooks type thing?
-
54 minutes ago, Rogerborg said:
Best results I've got are from 12V blowers, often sold as 3D printer fans, run off a spare 7.4V lipo, and a piece of tubing to get the air inside the goggles. Or ExFog, if you want the commercial alternative.
I built something similar, ran in in the back panel and a switch on my right shoulder.
I used a bigger blower rather than 2 micros as I ordered the wrong one.But it works when paired with the revision wipes. The next revision i will make to them is to use some more rigid tubing to stop them collapsing on themselves, and then find a way to keep the air pressure up
-
Played a test day for Rift Redcon 2.1.
Good sight and saw some people I haven't seen in a while. Weather was a fog fest for goggles for most people.
Only downsides were some people being generous with the MED for BAR's, and i dropped a glock mag which unless its literally on the main walkways, anything you drop will be gone forever. -
Spent the last 6 weeks buying things that i should've bought over the last 2 years - ammo, batteries, mag o-rings etc.
Now to re-assemble my plate carrier, fix and re-wire various things and hopefully have a good game on Sunday
-
-
*checks calendar* Oh wow, it's April again...
-
-
So one of my glock base plate mags was leaking, so i bought these
https://www.leesprecision.com/rebuild-kit-for-tokyo-marui-g-series-xdm-40-magazines
But the base plate o ring is circular and when in place, doesn't seal fully, compared to the more angular stock one.
Is it a case of leaving it to soak a wee bit in silicone?
-
- Popular Post
- Popular Post
I put it to you m'lud, that Pop...Rocket...123, would INDEED get some arse, despite his preference of facial hair
-
7 hours ago, Speedbird_666 said:
the lens failed. A hole in the middle, and the edge chip/cracked away.
3 hours ago, Druid799 said:Unfortunately mate I can more than unhappily tell you from personal experience of dealing with the walking abortions that troop in and out of my A&E Dept everyday with the most bone headed injuries you could possibly imagine
I told you, i just fell on that ketchup bottle, whilst doing naked yoga...
-
Outside of it being an MP5, i think this a big step forward - built in / new FCU, LIPO ready out the box. Thats 50% of what people do to most NGRS out the box.
-
-
1 hour ago, Druid799 said:
Not arrogance , just plain old inbred stupidity , this nobber is obviously thicker than a bucket of pigshit 🤪 so should we expect any thing different ? 🤣🤣
Remember the old adage - Never argue with an idiot. They will take you down to their level, then beat you with experience.
- PopRocket123 and Druid799
-
2
-
I would say the bubble seems to be bursting on some of the non mint/ BNIB ones recently.
Mint ones seem to be listed at £700-800 and selling after a few days with a handful of mags and spares.
As @rocketdogbertmentioned, the others seem to be hanging around a bit longer even at lower prices.
-
3 hours ago, Hatchet said:
Well, since he hasn't grasped the difference between slander and libel, I think you'll be okay.
-
I'm assuming a private group? Shame, the microwave popcorn just pinged
-
1 hour ago, Jamerz said:
Not to mention the helmet (if safe to start with) has now had its structural integrity modified with screws, if someone was to mount a gopro etc and had a big slip or a fall, who knows how it would fair now up on a direct impact
Isn't that what is rumoured to happen with Schmacher Snr? His gopro mount weakened the helmet which meant it exploded on impact
What have you just 3d printed (for airsoft)
in Guns, Gear & Loadouts
Posted
So gone down a rabbit hole - the Ender 3 printer is like £130-150.
Worth the investment?