Shizbazki

I didn't mean this kid specifically, i was generalising across the board, sorry if it came across wrong, like i said at the top, bit of a rant, maybe i should have separated those two sentences to imply that they were not connected.
 
In "general", if you hear about a young lad who has died as a result of stabbing, shooting etc and they use those particular aspiring roles (often the chosen ones are artist, architect, footballer or rapper). More often than not, look into their backgrounds.
 
Case in point was Jaiden Moodie, painted as a young angelic 14 year old lad who was brutally murdered in London. WHO was also a drug dealer and drug runner for a notorious London Gang.
 
Yes, young Kai made a stupid mistake don't get me wrong, but i still think that the way police handled it was very good and would fully expect the same to happen to me had i been waving a gun around my front window.
 

I didn't mean this kid specifically, i was generalising across the board, sorry if it came across wrong, like i said at the top, bit of a rant, maybe i should have separated those two sentences to imply that they were not connected.
 
In "general", if you hear about a young lad who has died as a result of stabbing, shooting etc and they use those particular aspiring roles (often the chosen ones are artist, architect, footballer or rapper). More often than not, look into their backgrounds.
 
Case in point was Jaiden Moodie, painted as a young angelic 14 year old lad who was brutally murdered in London. WHO was also a drug dealer and drug runner for a notorious London Gang.
 
Yes, young Kai made a stupid mistake don't get me wrong, but i still think that the way police handled it was very good and would fully expect the same to happen to me had i been waving a gun around my front window.
 

Police did the right thing, full stop.
 
Going to go ona  bit of a rant, and some of you will pick out the "what if's" and "what about's" but do note that each case is taken at its own merit.
 
Police received a call from a member of public (MOP) who stated that they saw a boy holding a pistol.
You must remember, MOPs or Joe public don't know the difference between airsoft, air gun, and a real gun, they just see gun and report it as such.
Furthermore the same MOP probably only witnessed said boy with gun for probably a few seconds and lets be real, if you thing real danger is close, you Foxtrot Oscar (ill let you figure that out)
Also they saw the gun through a window, possibly through net curtains and also, as is often the case, in daylight indoors seem dark, in the dark colours lose their saturation so a dark blue (as we saw in the photos) can look like a slightly different shade of black.
 
For those that don't know, in London a typical "999" as such get sent from a call handler, who dispatches it to an Operator, before the Operator dispatches the call. Now especially in one involving firearms, the local Duty Inspector is made aware of it, also keeping a look out for such calls is a Firearms Command Officer (often another Inspector). They will basically ask 101 questions and triage the call to ensure what they do is right, they will also at times personally call the MOP and ask them about what they saw, how long for and sometime even ask what their knowledge on firearms is (you would not believe the number of calls police receive as shots fired when in reality ts a backfiring car)..
 
As part of this "TRIAGE" they ask what the description is and of course his skin colour would come up. Of course they would do intelligence and checks on the address and anyone who lives there fast time too. Meanwhile firearms officers are making their way to the location too. The description is for officers to ensure that they locate the right address, the right person and the right item. And yes they do screw up sometimes, they are only human.
 
Now someone mentioned the "W" word or warrant.
I'm not going to read it out here but please look up Section 17 PACE 1984, it gives officers power of entry without warrant under certain conditions if they have reasonable suspicion, and on this occasion the suspicion was reasonable. This "Do you have a warrant?" thing is pretty much from the US but yes Warrants here do exist. I mean you should see Tipstaff Warrants, if the officer even thinks you're lying, you get nicked.
 
Believe it or not, those that live in the UK, the laws here can be somewhat quite draconian in many ways, i mean look up some of the Royal Parks act, sheesh its an offence to even breath loudly in them.
 
The 12 year old is not the same as you see in the photos, those are the pictures chosen by family to make him appear as angelic as possible, whenever you hear aspiring artist, architect, footballer or rapper killed (often sadly in some kind of gang feud) then look through that, bet if you were to see their previous it might make you think twice. 
 
Also the area in general is pretty high on crime and gang warfare, it is not uncommon for senior gang members to give guns, drugs or weapons to younger gang kids they've recruited to carry their stuff as they think that they will be more unlikely to be stopped.
 
Yes officers forced entry into the home, officers are trained to deem anything and anyone as either Unknown Risk and High Risk, there isn't a Low Risk. They don't know what they are going into, a family home (in this case it was) or a gang den. Everyone was detained and led away from the address with the 12 year old boy cuffed (probably at the rear) and taken to a police vehicle, property was searched and a two tone airsoft gun was found, HE WAS DE-ARRESTED once it was established that it was an airsoft gun.
 
Due to the current political climate the family now thinks "ah we are entitled to some compo here", the body worn video has been viewed by a senior officer who is the lead in policing firearms  and stated that he viewed the body worn footage and saw that the officer behaved properly, professionally and conducted everything as per their training, cant wrong them for doing what the book says.
 
Also forget David Lammy, dont even get me started on that waste of space that is Diane Abbott, i think she is the second most hated MP after Theresa May by police officers

I didn't mean this kid specifically, i was generalising across the board, sorry if it came across wrong, like i said at the top, bit of a rant, maybe i should have separated those two sentences to imply that they were not connected.
 
In "general", if you hear about a young lad who has died as a result of stabbing, shooting etc and they use those particular aspiring roles (often the chosen ones are artist, architect, footballer or rapper). More often than not, look into their backgrounds.
 
Case in point was Jaiden Moodie, painted as a young angelic 14 year old lad who was brutally murdered in London. WHO was also a drug dealer and drug runner for a notorious London Gang.
 
Yes, young Kai made a stupid mistake don't get me wrong, but i still think that the way police handled it was very good and would fully expect the same to happen to me had i been waving a gun around my front window.
 

Police did the right thing, full stop.
 
Going to go ona  bit of a rant, and some of you will pick out the "what if's" and "what about's" but do note that each case is taken at its own merit.
 
Police received a call from a member of public (MOP) who stated that they saw a boy holding a pistol.
You must remember, MOPs or Joe public don't know the difference between airsoft, air gun, and a real gun, they just see gun and report it as such.
Furthermore the same MOP probably only witnessed said boy with gun for probably a few seconds and lets be real, if you thing real danger is close, you Foxtrot Oscar (ill let you figure that out)
Also they saw the gun through a window, possibly through net curtains and also, as is often the case, in daylight indoors seem dark, in the dark colours lose their saturation so a dark blue (as we saw in the photos) can look like a slightly different shade of black.
 
For those that don't know, in London a typical "999" as such get sent from a call handler, who dispatches it to an Operator, before the Operator dispatches the call. Now especially in one involving firearms, the local Duty Inspector is made aware of it, also keeping a look out for such calls is a Firearms Command Officer (often another Inspector). They will basically ask 101 questions and triage the call to ensure what they do is right, they will also at times personally call the MOP and ask them about what they saw, how long for and sometime even ask what their knowledge on firearms is (you would not believe the number of calls police receive as shots fired when in reality ts a backfiring car)..
 
As part of this "TRIAGE" they ask what the description is and of course his skin colour would come up. Of course they would do intelligence and checks on the address and anyone who lives there fast time too. Meanwhile firearms officers are making their way to the location too. The description is for officers to ensure that they locate the right address, the right person and the right item. And yes they do screw up sometimes, they are only human.
 
Now someone mentioned the "W" word or warrant.
I'm not going to read it out here but please look up Section 17 PACE 1984, it gives officers power of entry without warrant under certain conditions if they have reasonable suspicion, and on this occasion the suspicion was reasonable. This "Do you have a warrant?" thing is pretty much from the US but yes Warrants here do exist. I mean you should see Tipstaff Warrants, if the officer even thinks you're lying, you get nicked.
 
Believe it or not, those that live in the UK, the laws here can be somewhat quite draconian in many ways, i mean look up some of the Royal Parks act, sheesh its an offence to even breath loudly in them.
 
The 12 year old is not the same as you see in the photos, those are the pictures chosen by family to make him appear as angelic as possible, whenever you hear aspiring artist, architect, footballer or rapper killed (often sadly in some kind of gang feud) then look through that, bet if you were to see their previous it might make you think twice. 
 
Also the area in general is pretty high on crime and gang warfare, it is not uncommon for senior gang members to give guns, drugs or weapons to younger gang kids they've recruited to carry their stuff as they think that they will be more unlikely to be stopped.
 
Yes officers forced entry into the home, officers are trained to deem anything and anyone as either Unknown Risk and High Risk, there isn't a Low Risk. They don't know what they are going into, a family home (in this case it was) or a gang den. Everyone was detained and led away from the address with the 12 year old boy cuffed (probably at the rear) and taken to a police vehicle, property was searched and a two tone airsoft gun was found, HE WAS DE-ARRESTED once it was established that it was an airsoft gun.
 
Due to the current political climate the family now thinks "ah we are entitled to some compo here", the body worn video has been viewed by a senior officer who is the lead in policing firearms  and stated that he viewed the body worn footage and saw that the officer behaved properly, professionally and conducted everything as per their training, cant wrong them for doing what the book says.
 
Also forget David Lammy, dont even get me started on that waste of space that is Diane Abbott, i think she is the second most hated MP after Theresa May by police officers

I remember the jaiden moodie case, everyone coming out of the woodwork for their 5 minutes of fame exclaiming "what a good boy he was", all I could think was "why was a 14yo illegally riding a ped, what else was he up to ?", & obviously a lot more came to light.

Police did the right thing, full stop.
 
Going to go ona  bit of a rant, and some of you will pick out the "what if's" and "what about's" but do note that each case is taken at its own merit.
 
Police received a call from a member of public (MOP) who stated that they saw a boy holding a pistol.
You must remember, MOPs or Joe public don't know the difference between airsoft, air gun, and a real gun, they just see gun and report it as such.
Furthermore the same MOP probably only witnessed said boy with gun for probably a few seconds and lets be real, if you thing real danger is close, you Foxtrot Oscar (ill let you figure that out)
Also they saw the gun through a window, possibly through net curtains and also, as is often the case, in daylight indoors seem dark, in the dark colours lose their saturation so a dark blue (as we saw in the photos) can look like a slightly different shade of black.
 
For those that don't know, in London a typical "999" as such get sent from a call handler, who dispatches it to an Operator, before the Operator dispatches the call. Now especially in one involving firearms, the local Duty Inspector is made aware of it, also keeping a look out for such calls is a Firearms Command Officer (often another Inspector). They will basically ask 101 questions and triage the call to ensure what they do is right, they will also at times personally call the MOP and ask them about what they saw, how long for and sometime even ask what their knowledge on firearms is (you would not believe the number of calls police receive as shots fired when in reality ts a backfiring car)..
 
As part of this "TRIAGE" they ask what the description is and of course his skin colour would come up. Of course they would do intelligence and checks on the address and anyone who lives there fast time too. Meanwhile firearms officers are making their way to the location too. The description is for officers to ensure that they locate the right address, the right person and the right item. And yes they do screw up sometimes, they are only human.
 
Now someone mentioned the "W" word or warrant.
I'm not going to read it out here but please look up Section 17 PACE 1984, it gives officers power of entry without warrant under certain conditions if they have reasonable suspicion, and on this occasion the suspicion was reasonable. This "Do you have a warrant?" thing is pretty much from the US but yes Warrants here do exist. I mean you should see Tipstaff Warrants, if the officer even thinks you're lying, you get nicked.
 
Believe it or not, those that live in the UK, the laws here can be somewhat quite draconian in many ways, i mean look up some of the Royal Parks act, sheesh its an offence to even breath loudly in them.
 
The 12 year old is not the same as you see in the photos, those are the pictures chosen by family to make him appear as angelic as possible, whenever you hear aspiring artist, architect, footballer or rapper killed (often sadly in some kind of gang feud) then look through that, bet if you were to see their previous it might make you think twice. 
 
Also the area in general is pretty high on crime and gang warfare, it is not uncommon for senior gang members to give guns, drugs or weapons to younger gang kids they've recruited to carry their stuff as they think that they will be more unlikely to be stopped.
 
Yes officers forced entry into the home, officers are trained to deem anything and anyone as either Unknown Risk and High Risk, there isn't a Low Risk. They don't know what they are going into, a family home (in this case it was) or a gang den. Everyone was detained and led away from the address with the 12 year old boy cuffed (probably at the rear) and taken to a police vehicle, property was searched and a two tone airsoft gun was found, HE WAS DE-ARRESTED once it was established that it was an airsoft gun.
 
Due to the current political climate the family now thinks "ah we are entitled to some compo here", the body worn video has been viewed by a senior officer who is the lead in policing firearms  and stated that he viewed the body worn footage and saw that the officer behaved properly, professionally and conducted everything as per their training, cant wrong them for doing what the book says.
 
Also forget David Lammy, dont even get me started on that waste of space that is Diane Abbott, i think she is the second most hated MP after Theresa May by police officers

Police did the right thing, full stop.
 
Going to go ona  bit of a rant, and some of you will pick out the "what if's" and "what about's" but do note that each case is taken at its own merit.
 
Police received a call from a member of public (MOP) who stated that they saw a boy holding a pistol.
You must remember, MOPs or Joe public don't know the difference between airsoft, air gun, and a real gun, they just see gun and report it as such.
Furthermore the same MOP probably only witnessed said boy with gun for probably a few seconds and lets be real, if you thing real danger is close, you Foxtrot Oscar (ill let you figure that out)
Also they saw the gun through a window, possibly through net curtains and also, as is often the case, in daylight indoors seem dark, in the dark colours lose their saturation so a dark blue (as we saw in the photos) can look like a slightly different shade of black.
 
For those that don't know, in London a typical "999" as such get sent from a call handler, who dispatches it to an Operator, before the Operator dispatches the call. Now especially in one involving firearms, the local Duty Inspector is made aware of it, also keeping a look out for such calls is a Firearms Command Officer (often another Inspector). They will basically ask 101 questions and triage the call to ensure what they do is right, they will also at times personally call the MOP and ask them about what they saw, how long for and sometime even ask what their knowledge on firearms is (you would not believe the number of calls police receive as shots fired when in reality ts a backfiring car)..
 
As part of this "TRIAGE" they ask what the description is and of course his skin colour would come up. Of course they would do intelligence and checks on the address and anyone who lives there fast time too. Meanwhile firearms officers are making their way to the location too. The description is for officers to ensure that they locate the right address, the right person and the right item. And yes they do screw up sometimes, they are only human.
 
Now someone mentioned the "W" word or warrant.
I'm not going to read it out here but please look up Section 17 PACE 1984, it gives officers power of entry without warrant under certain conditions if they have reasonable suspicion, and on this occasion the suspicion was reasonable. This "Do you have a warrant?" thing is pretty much from the US but yes Warrants here do exist. I mean you should see Tipstaff Warrants, if the officer even thinks you're lying, you get nicked.
 
Believe it or not, those that live in the UK, the laws here can be somewhat quite draconian in many ways, i mean look up some of the Royal Parks act, sheesh its an offence to even breath loudly in them.
 
The 12 year old is not the same as you see in the photos, those are the pictures chosen by family to make him appear as angelic as possible, whenever you hear aspiring artist, architect, footballer or rapper killed (often sadly in some kind of gang feud) then look through that, bet if you were to see their previous it might make you think twice. 
 
Also the area in general is pretty high on crime and gang warfare, it is not uncommon for senior gang members to give guns, drugs or weapons to younger gang kids they've recruited to carry their stuff as they think that they will be more unlikely to be stopped.
 
Yes officers forced entry into the home, officers are trained to deem anything and anyone as either Unknown Risk and High Risk, there isn't a Low Risk. They don't know what they are going into, a family home (in this case it was) or a gang den. Everyone was detained and led away from the address with the 12 year old boy cuffed (probably at the rear) and taken to a police vehicle, property was searched and a two tone airsoft gun was found, HE WAS DE-ARRESTED once it was established that it was an airsoft gun.
 
Due to the current political climate the family now thinks "ah we are entitled to some compo here", the body worn video has been viewed by a senior officer who is the lead in policing firearms  and stated that he viewed the body worn footage and saw that the officer behaved properly, professionally and conducted everything as per their training, cant wrong them for doing what the book says.
 
Also forget David Lammy, dont even get me started on that waste of space that is Diane Abbott, i think she is the second most hated MP after Theresa May by police officers

Don't worry Dave, I have another one - exactly the same spec 😁
 
PS: the above listing is now sold. Which means another member of the MWS clan is now incoming...

Glad you went Prommy, for I while there I thought you were going to go Crazy.
Some like them but in testing I did not.
 
Before you get super excited and throw all your packaging away; roll the barrel on a flat surface and check it's true/straight.
 
Also inspect the crown/barrel exit for any little burrs.
 
95% of the time Prommy are bang on but sometimes there's the odd lemon
 

I have a Mk12 upper (With it’s own BGC) for my MWS set up as a DMR. Currently firing bang on 315 FPS on a .4g bb (318 FPS on a .4g bb is equivalent to 450 on a .2g bb).
 
I didn’t upgrade much as far as the internals go to get the power and accuracy my list was:
 
- SixG Brass nub (so I can hop heavy BBs)
- npas valve (so I can tune the FPS, it goes higher as well as lower than stock).
- Maple Leaf Crazy Jet 455mm VSR Cut Barrel.
 
That’s it in terms of internals. In terms of externals you will need either a silencer or an 18inch outer barrel to cover that inner barrel (I was always going to do a MK12 upper so just chose the longest inner barrel that would fit in the 18” outer).
 
other than that everything else (sights, bipeds etc.) is optional.
 
There are other ways to go (e.g tighter bore barrel will get more FPS, so won’t need to be as long), but this was very cost effective and has been super reliable as I’m not messing with spring tensions or other stuff that could impact reliability.
 
As an aside I have found the stock TM hop rubber to be the best balance of performance and durability. There are hops that perform better (some of the maple leaf buckings and the modify tan spring to mind), but I have found they don’t last that long at DMR FPS.
 
Edit: just to add there are still a few turns left on the npas so I could go higher FPS.
 
Second Edit: I also permanently modified the safety/selector switch to semi only (needed to comply with U.K. law). There is a YouTube video on how to do this.

Upgrade the inner to a 370 mm should get you upto DMR levels.

My new love has just arrived! Goes well with my Strike Industries build! Just awaiting the mount, Strike Industries buffer tube and takedown pins

Longtime lurker, first time poster. I blame this thread entirely for encouraging me to buy and modify an MWS 😁 (thanks?). Have had a number of AEGs and GBB pistols, but this was my first venture into GBBRs.
 
 I stupidly decided to go down the expensive and difficult route of modify my first MWS to recreate John Wicks TR-1, albeit with a few minor changes. It's more akin to the current version sold on Brownells as opposed to the version seen in the movie. A little bit of both I guess. So far its mostly externals, but I intend on working on the internals as well. Once I have some more money that is 😅.
 
AngryGun John Wick Conversion Kit (TTI TR-1) AngryGun High-speed Bolt Carrier (FDE) & MPA Nozzle AngryGun AMBI Charging Handle AngryGun Rear Receiver QD Mount BCM MOD-3 Keymod Forgrip BCM MOD-3 Gunfighter Pistol Grip BCM Gunfighter Stock BCM Trigger Guard BCM Keymod Panels GunsModify MWS Steel Dust Cover J P Enterprises 45º Canted Rail CYMA Quick Detach Dual Scope Mount (30mm) RMR Red-Dot Sight (Clone) VisionKing 1.25-5x Rifle Scope IronAirsoft PMag (Just for show. Terrible mags!!!!!) PMag Base Plate/Extension

Am I the only person in this thread to have a completely stock MWS and not be wanting to fuck with it?

You can actually hit someone at distance out of the box with it. It’s within FPS limits out of the box. It’s got a cerakote finish that’s really nice and hard wearing. Had a good hop setup, not an awful plastic one you need to dismantle the hand guard to adjust. Cheaper mags. Much better and less bitter community...
 
GHK pro’s: the trigger looks more realistic. Considering you can’t see it unless you’re cleaning it that’s kind of irrelevant. Trigger pull is nicer. Kicks a bit more but isn’t as ‘snappy’ unless you’re running £70+ co2 mags. 
 
Owned and build multiple GHK’s and MWS’

I will compile a summary post of everything I’ve tried so far and the pro’s and cons tonight if anyone is interested. That should save people 85+ pages of reading as a lot of things have changed. 

Hhmmm i see some pople having issues with their MWS, i will count my lucky stars then.
 
Took my TM MWS out on Sunday and my oh my di it impress.
 
Yeah Using Green Gas she was shooting 330FPS using .020g BBs and around 295FPS on .28g BBs.
 
Stock Hop chamber, hop arm, hop rubber and bucking the MWS was sending BBs so far i was losing sight of them.

My Vortex optics was so on point that where ever i pointed it at was guaranteed a hit!
 
Gas in mags were good enough for full auto dump (not that i do this, i use mostly semi).
 
Lock back worked everytime, i must say iw as mucho impressed and plan to take her out again.

Hhmmm i see some pople having issues with their MWS, i will count my lucky stars then.
 
Took my TM MWS out on Sunday and my oh my di it impress.
 
Yeah Using Green Gas she was shooting 330FPS using .020g BBs and around 295FPS on .28g BBs.
 
Stock Hop chamber, hop arm, hop rubber and bucking the MWS was sending BBs so far i was losing sight of them.

My Vortex optics was so on point that where ever i pointed it at was guaranteed a hit!
 
Gas in mags were good enough for full auto dump (not that i do this, i use mostly semi).
 
Lock back worked everytime, i must say iw as mucho impressed and plan to take her out again.

Trawling through this thread it seems the collective agreement is that the stock nub will hop up to .28 but no heavier, but I’ve also heard anecdotally that it will hop beyond this.  In my experience, with very little hop (maybe two clicks from off) I’m over hopping .28s @ 20m.

Well, go ahead and grab some coffee and hit play on that Spotify Playlist
 
Hello guys, Cheers from Panama City, Panama. (Central America just in case)
 
i bought my MTR16 a couple of months ago and was waiting to be a least on half of the build i am planing to share with you guys the excitement, the process and the findings with the journey
 

 
So, i have played once on a game and also several practices with my team as you can notice some scratches. 
I have to say that is one of the very best GBBRs that i have tested, i have shot with KWA LM4s, GHKs M4 and G5 and this is one of the most quality out of the box that i can feel.
Of course upgrades are necessary to give that personality and punch that the gun deserves to have
 
I play Milsim / Hardcore Milsim like 90% and even tho my main roll on my team is to be a sniper ( got a JG BAR10 tune up with Action Army Parts hitting 400 fps with 0.43 @3.07 Joules if you are interested)
i really wanted to go for the GBBR experience by being DMR/ Assault when i have the change or not allowed to play sniper at some areas or specific games. also being one of the instructors for some drills on the Practices with my team is great to have the your very own mainstream gun :v
 
Vanilla version of the gun was like this
 

 
 
 
My Limits for DMR are   2.23J máx. – 490 FPS
and for Assault are 1.60J máx. - 415 FPS
 
did some research since i was point blank on how GBBRs worked, had a clue but definitely not a Pro. decided to go for the ORGA LEX05 6.05 410mm for the inner barrel with the Modify TAN hop up and SixG nub ( classic copy paste from the 1st pages of the thread)
 

 
Dont you love that outer barrel? i really enjoy this design
 
Since the MTR comes with a 250mm even tho it came on a 16" barrel ( a shame on my opinion) i decided to go full on outer barrel length.  this barrel was a PAIN to get. since there is not much sites that sell them ( as far as i know) tried but finally got it from French (i believe) with POWAIR6.
 

 
here you can appreciate the good work of Dave. fitting perfectly  and in symphony with the Modify TAN that has a singular density... perhaps i will try the Maple Leaf Autobot and Decepticon here since i use them on my Sniper having good results just  to see or confirm the findings of Wolf1 on the first pages of the thread regarding the hop up buckings.
 
something i have to mention is that TM put Thread Lock on everything on the barrel, from the muzzle break to the NUTS! wink wink.... it was a PAIN in the ass to unscrew all the nuts from the M-Lok barrel, took hammer, a nail, and 4 arms to hold it and being able to take it apart... i though i would damage the inlays for the tool with it.. and to put it back was a pain too. while hammering the middle section, hit o the threads for the outer nut and was almost impossible to put back in.
 
So after installing these, i literally got NO changes on the chrono neither FPS or JOULES change with these. i was expecting at least some 20-40 fps up due to the length of the barrel. but it looks like what i gain on length, i loose it on the bore of the barrel. since is a 6.05. i originally was looking for a 6.01 but was not able to find anyone anywhere. well there was some 6.01 but most are 250 or 370 something around that, but for me that was a Nope.
 
but yes, i had an ace under my sleeve...actually two

 
to Power up i decided to go with some options on  so called "high flow valves"
on your Left (red one just in case) you will find the G&P CNC Enhanced Nozzle Valve Set 5.0 and pay attention to the numbers since they change with the number. the higher the number the higher the power. but it still adaptable with this part
on your Right you will see the Dynamic Precision Enhanced Nozze Valve.
 
Now.
with the Dynamic Precision i felt a little bit happy since i see some hope to power up this thing

 
so with the Dynamic Precision Valve i went almost 100 fps up with .50 joules up.  and by the way this is with NO other Nozzle Enhanced part but the Dynamic Precision Enhanced Sealing Buffer which i find better quality than tm's original, also a bit tougher

 
 
for a DMR that previous reading was still weak for what i was looking for, but dont worry , remember i got 2 aces and this time went full hardcore with no measurements or holding on the go
 
I went with the G&P Nozzle and i have to tell you that i really was expecting, not  poor quality but at least mediocre from this coming from the G&P since is a mid level quality company and it actually leave me with my jaw drop to the ground. you will see why
 
but did not tried just the Nozzle, but went also with some upgrades for the Nozzle parts from Dynamic Precision...
 
A full set of Enhanced Nozzle Spring Sets

 
there is the Valve Spring, the Guide Spring, the Nozzle Return Spring
they feel really good quality and the return spring is some tighter from the original and that helps on the performance
 
installed the G&P Valve and used the Valve Stopper ( i will call this part like that since i forgot the real name) all the way from what i thought could be the max power set up... these valves comes with this so you can tune up on 3 different settings. Min- Mid- And Max power. 
 
and i got... this monstrosity
 

 
520 Fps with 0.20 at 2.52 Joules, and this is not the 1st reading,  i forgot to take a picture of the first shots. it was at 2.8 joules almost at 545 fps
 
this might be nothing compared other builds here that i know could be shooting higher and harder but for me was joy, i was astonish with the results
 
Sadly it was TOO HOT, i actually over pass my team and also marshals limits
 
then i decided to put it on the minimum settings, and i went down all the back like back with the TM stock valve.
forgot to take a picture of this, since i started to worry, it was getting late on the day and i was worry that the last resort. the MID section will not be either enough or will still by over passing the limits......
 
so dismount and put everything back with the MID section... and at this point i was so frustrated that i laterally was making plans to sell the gun with everything if it does not worked out ... almost like a rage quit when you loose those ranked matches at league of legends due to some troller's fault
 
so back to topic... my limits are 2.23 Joules - 490 FPS and then finally i was.... drums roll!!!

 
JUST ON FUC^%&(* point!!!!
 
i almost cried when i saw these!! nothing was in vain!! all those over time hours of receiving calls from Kumar Patel with a problem on his Outlook were worth it!!!!
 
Finally hit this mark and im really satisfied with these results. the readings were very consistent.
 
i have not decided with what weight i will play... thinking about some .36s or .40s depending on the results .
 
 
Additionally have some extra parts.
 
i went with the Angry Gun Hard Kick Recoil Buffer. and i got to tell you that yes there is a lot of difference on this. even tho its angry gun, it fits just fine!
 

 
and by the way that whitey creamy thing is PTFE Grease.... and yes you might be thinking i am a dumb already, but i have still not find out if the is good or not for it. i cleaned it out already... putted also some on the bolt carrier but i dont think is good there so cleaned out too....
can you tell me what you use to clean and lubricate yours?
 
so wrapping up i am very happy with this DMR/Assault build.... half way trough it. now moving o the externals
 
if you guys have any questions or would like me to post the part list that i used including the externals you see on the picture so far just let me know or reply to the post with your inquiry!

I also want to say thanks to all of those who have shared their finding, experiences and knowledge on this thread, they have been of great help,  hoping to make it bigger and better!! to all of you keep up with the good work !!
 
 
 

My Recent TM MWS skirmishing experience yesterday on 03-03-19 at The Plantation Airsoft, Billericay, Essex.
 
I must say that often when i take guns out for their first outing i'm always a bit apprehensive of how they will perform because whilst i can tech and chrono at home, i have no way to test range and accuracy. My GHK M4 Mod1 and Ares WA2000 are recent prime examples of this when on their first outing they really failed to impress me with their range despite the amount of money i had sank into hop up and barrel upgrades hoping that they would hit the mark.
 
So recently as some of you may know i got hold of this TM MWS second hand, it had already had some some changes (i put the gold on it, it was stock when i got it), i didn't like the 7" RIS rail (too short), didn't like the fact that the inner barrel extended through the flash hider and whilst the pistol grip and stock were Magpul inspired, they weren't REAL Magpul (PTS i think).
BEFORE

 
SO i put a barrel extender on it to lengthen the outer barrel by 2 inches so that the flash hider would clear the inner barrel, but this necessitated a 9inch RIS rail which i bought from Wolf Armouries, i went to my GHK M4 Mod 1 and removed the Vortex Optics StrikeFire Red dot sight, the real steel Magpul pistol grip and Magpul MOE stock and put it on the MWS. Had a small issue with the BCG not locking back (see pages 31 to 33 of this thread) but between me and Nathan the Tech at Airsoft Zone we deduced that it must be the BCG and magazine springs, he also kindly installed a lightweight bolt catch in my MWS which i brought into the shop with me. Stretching the magazine springs out solved the issue.
 
AFTER

 
Now she was battle ready or so i hoped as i had not tested the accuracy or range of my TM MWS, i was hoping that it would be like how my TM M92FS wow'd me the first time i used it where the BB seem to travel for miles out ranging even AEGs.
 
First skirmish day at The Plantation Airsoft, Billericay. (MUDDY AF due to recent rain)
I'm apprehensive to say the least, i have brought the MWS but also my trusty SAI M4 HPA gun as i know that one works. Mags are loaded and gassed.
Take the MWS to the range, hop is set to completely off, using .25g BBs and fired the first shot.
 
OMG! BB flew decently far, with hop off? Adjusted the hop, a little of backward and forwarding and i got it just right. BBs flew for miles straight, i was IMPRESSED!
I played the first half of the day with the TM and loved it, more so than when i used the GHK M4 MOD1. I knew i could pull the trigger and the MWS would reliably work whereas the GHK was pull the trigger and please work?!
 
My only complaint is that i had to adjust my game style, no more burst autoing every where or i would have no more ammo, i had to go back to the safe zone twice in two staggered games to re gas and reload but i was much happier using the TM MWS.

It did make me wonder, why did i buy the GHK, when i wanted a GBBR the TM MWS was on my potentials list but i dismissed it since it would mean that if i wanted to install a keymod rail, i would have to buy a rail, a barrel spacer, get rid of that triangle sight etc etc. But i still would have saved money if i didn't buy the GHK, i am now strongly considering selling the GHK as its surplus to needs.
 
To the future, i'm probably going to leave the MWS like this because "IT WORKS". I know there's this magical brass nub thingy but I don't want to fiddle removing the hop and stuff otherwise the TM hop fairy dust might be blown away.
I might just buy some more Magpuls for the mags and possibly get a Gold BCG but that's it really.

So far everything has been a drop in fit! Actually surprised, even the SI dust cover fits perfectly. Only "strange" bit is that the forward assist stick out more than it probably should.
 
 

Great news everybody!! My John Wick set, it has been seized by customs, wonderful! The store where I bought it did not add a picture of my Dutch Airsoft Association card on the box, even though I specifically asked them to do so and they even acknowledged it. Now I will have to go through
a lot of trouble actually getting the bloody set. Last time I order from that store, if they can't handle a fairly pricey package decently they do not deserve any money from me :(.

Realized I never posted a picture of my MTR16 here.
Just ignore the odd colors at both ends.
Sadly they have to be painted this way due to legal reasons, as its demanded by law.