Leaderboard

Good thinking. Trying to get closer to the site limit would be a waste of time as you could easily go over and that extra 6fps will make bugger all difference anyway

A Sig 320 discharging by itself? Sounds like it's real-steel accurate.

How much

the G4 stuff is mixed between USA and the cheaper European made (NSPA ) so again the labelling is going to slightly differ .

The labelling can differ depending on the batch , age , and unit / commercial outlet. for example, three of mine - L-R G3 , AC , C

Went back and adjusted my sight the other way last week. At around 40m its pretty spot on. ?

So the chrono has arrived and I tested both the M105 and M100 springs in the UTR45. M100 - 346fps @ 1.12 joules M105 - 366fps @ 1.25 joules Looks like the M100 is the one for me!

By the time a Navy pilot pulled into a little town, every hotel room was taken. "You've got to have a room somewhere," he pleaded. "Or just a bed, I don't care where." "Well, I do have a double room with one occupant, a Marine pilot," admitted the manager, "and he might be glad to split the cost. But to tell you the truth, he snores so loudly that people in adjoining rooms have complained in the past. I'm not sure it'd be worth it to you." "No problem," the tired Navy pilot assured him. "I'll take it." The next morning the Navy Pilot came down to breakfast bright-eyed and bushy-tailed. "How'd you sleep?" Asked the manager. "Never better." The manager was impressed. No problem with the other guy snoring, then?" "Nope, I shut him up in no time." Said the Navy pilot. "How'd you manage that?" asked the manager. "He was already in bed, snoring away, when I came in the room, I went over, gave him a kiss on the cheek, said, 'Goodnight, beautiful,' ...and he sat up all night watching me."

A GIRLS FIRST TIME As you lie back your muscles tighten. You put him off for a while searching for an excuse, but he refuses to be swayed as he approaches you. He asks if you're afraid and you shake your head bravely. He has had more experience, but it's the first time his finger has found the right place. He probes deeply and you shiver; your body tenses; but he's gentle like he promised he'd be. He looks deeply within your eyes and tells you to trust him-he's done this many times before. His cool smile relaxes you and you open wider to give him more room for an ease of entrance. You begin to plead and beg him to hurry, but he slowly takes his time, wanting to cause you as little pain as possible. As he presses closer, going deeper, you feel the tissue give way; pain surges throughout your body and you feel the slight trickle of blood as he continues. He looks at you concerned and asks you if it's too painful. Your eyes are filled with tears but you shake your head and nod for him to go on. He begins going in and out with skill but you are now too numb to feel him within you. After a few moments, you feel something bursting within you and he pulls it out of you, you lay panting, glad to have it over. He looks at you and smiling warmly, tells you, with a chuckle; that you have been his most stubborn yet most rewarding experience. You smile and thank your dentist. After all, it was your first time to have a tooth pulled. You filthy minded feckers ?

Nozzle length isn't dictated by barrel length, but by the hop design. Sounds like you have a Hop Unit to Nozzle incompatibility which is very typical for bitza builds. Get an adjustable length nozzle and start working out what the ideal length is through trial and error.

A wee addition to my sniper/spr/dmr collection.

hop fully on isn't a great way to test, many a pew can have low fps to the point of even being incapable of firing with a full hop applied. the main thing is that with the hop set to an appropriate in-game level, that the fps is reasonable, fully on or fully off then things get weird. if you want a ballpark measurement, without needing a range to set properly, then ~0.5mm of protrusion into the barrel will be at least in the same postcode.

custom gbb workshop LaFrance M16K WE V3 gbb airsoft Receiver color grey steel out barrel steel flash hider complete steel trigger box detail fix

Flintlock custom workshop Saiga 12 drum mag turned up. 350 BB's of madness coming up.

O M G !!! if I may borrow the current vernacular , the CO2 mag was an absolute scream to use. Played 4 games today , 3 of them with the 249 and the 2 88g bulbs lasted the three games . I gassed out with about 5 minutes to go in the last one. Wasn't holding back either, much longer bursts then when I use the green gas mag. I recon I went through about 1500 rounds in total. If i use the co2 regularly I'll need more BB mags as I did run out in one game due to longer bursts and playing an offensive game. Otherwise , the range on the thing continues to amaze me , and the sound ! They'll ban 'em eventually 'cos they are too much fun !

So here it is, still in need of cable management and the grip needs to be installed but feeling good none the less. I aim to make this one a DMR, in as much as one can do in airsoft, and so will be doing my best to source the parts that you guys have recommended. I'll shoot it a bit first for fun and then start the upgrades as soon as possible. Next step will be paint followed by some killflashes and a fair amount of tape for the shiny bits.