All Activity
- Past hour
-
I’m looking to upgrade my E&L AK74 but I have been looking around and no sure where to start. Has anyone who done any got recommendations and sites if possible:)
-
Time Left: 6 days and 23 hours
- For sale
- Used
Underwater Kinetics 821 - 20.9in x 12.9in x 8.4in - Brand new 'pick and pluck' foam. 2x foam layers. This is the bigger case and has more wear on the exterior with some old stickers from previous owner. £75 Underwater Kinetics 518 - 17.8in x 12.8in x 5.1 in - Brand new 'pick and pluck' foam. 1x foam layer. This is the smaller of the two cases but has almost no wear on the exterior. £65 Due to size & weight these will be sent with Parcelforce on a 48 hour service. All prices include Paypal and postage fees. Open to offers.£75
Hartlepool
-
The 'What have you just bought' Thread
Impulse replied to Cameron364's topic in Guns, Gear & Loadouts
Yep! I'm so happy I finally got one. I have now put all the parts in it (Action Army hop unit and nub, 4uantum hop rubber and a 570mm Stalker barrel), so next time I get to an airsoft site I'll be able to test it out; action army extended mags are a bit loose in it, but the King Arms extended mag appears to fit great, as do all my short KJW m700 mags (and obviously the short Tanaka m700 mags I have). In the meantime, going to see about getting a KJW suppressor adapter and seeing if it fits. If not I'll just use it without a suppressor because I don't want to swap out the outer barrel since I want it to look the part of the m24 (there's a reason I got one instead of just sticking with my m700s which look incredibly similar) Oh, it's also a pre-ban (as the box says) and whoever had it before has already saved me the issue of having to do the standard "replace that tiny Tanaka nozzle with the nozzle she tells you not to worry about"
-
Time Left: 6 days and 23 hours
- For sale
- Used
Seen a couple of games. Front wired to mini tamiya (see picture) comes with 2 x 130rnd mid caps, a 200rnd high cap and a 500 round dual high cap. some issues: - rear drum sight fallen off (& lost) - foam from suppressor missing - stock latch broke so stock can slide all the way out (doesn’t affect locking- stock locks in each position fine) I’d like proof you go airsofting (pics of you & gear or ukara) £140 p&p Any q’s or offers just chuck a text£140
- GB
-
Hello all, I've just gone through the process of my first gearbox shim. Everything's gone well, Up until I put it mostly back together, And check the fire modes. Single... Works fine. Auto... As expected... Safety... Fires auto 😠 So I had a look online, Seen all the usual jazz about loose selector levers, Wasn't the problem. Cutoff lever is in shape and the springs just fine. The selector plate looks to be in good shape. The cutoff lever is engaging the cam on the gear to the piston perfectly fine, (single works, after all) So I'm at a bit of a loss to what's going on. The only thing I notice is that the small raised level (shown red on image) doesn't move forward enough to engage the cutoff lever which'd stop the trigger from moving. The selector gears can't even move the selector plate forward enough for that, So I presume I'm missing something. Thanks in advance, And if it's something stupid I've missed, I'm really really sorry.
-
Leo dods joined the community -
Hatchet reacted to a post in a topic:
The 'What have you just bought' Thread
-
Time Left: 6 days and 23 hours
- Swap only
- Used
Looking to swap for something smaller. Arp9 or kwa or try me.?£150
-
Time Left: 6 days and 23 hours
- For sale
- As new
NEW Tactical Molle Triple Magazine Pouch 5.56mm with nylon inserts - £15 Postage included£15
- GB
-
Time Left: 6 days and 23 hours
- For sale
- Used
Most of the parts you see here have either been brought and never used or removed from a new APFG MPX I purchased and tested before I upgraded it. Anything purchased will include postage. 1 - USED Kydex customs FNX45 mag carrier with utpo 2.25" shooter belt mount - £15 2 - USED complete APFG MPX bolt carrier minus the nozzle, included is a new reinforcement plate and a upgraded buffer pad - £30 3 - NEW RGW 4.5 inch APFG MPX tri lug and 14mm ccw outerbarrel - £20 4 - USED APFG MPX/MCX ambi charge handle - £25 5 - USED APFG MPX complete hop unit with bucking - £25 6 - NEW APFG VFC GBB grip - £15 7 - NEW APS ultra thin Fiber Optic Sight RMR for glock ( AC102 ) - £15 8 - NEW zenitco A1 picatinny sling mount repo - £5 9 - USED picatinny redot riser- £10 10 - NEW CNC aluminium MAXX o-ring seal aeg nozzle 21.50mm - £10 11 - NEW Maxx CNC Titanium Adjustable Air Seal Nozzle 19mm - 22mm aeg - £15 07833894017 for more info on anythingNO VALUE SPECIFIED
Kempston, Bedford, Bedfordshire - GB
-
Darkmikey22 reacted to a post in a topic:
Gun picture thread
- Today
-
Time Left: 6 days and 22 hours
- For sale
- Used
* FULLY SERVICED, READY TO SKIRMISH* Selling a 1 of 1 custom built ASG CZ Scorpion Evo 3 "Dark Knight" inspired airsoft rifle. Painted in a gloss Smoke Grey finish with "Joker" decals and comes in two modes in a SBR & CQB setup, The "Two Face" theme also reflect on how one side is left plain & the other side isn't. All modifications, accessories, and consumables etc. that comes with this listing are: • Upgraded to Deans connector • 2020 improved MOSFET • ASG Ultimate Polycarbonate Piston M170 Red • ASG Ultimate Cylinder Head Aluminium V2 Blue • ASG Ultimate Piston Head Aluminium Ventilation Hexachrome Black • ASG CNC Short Stroke Speed Trigger Black • Ripper Tactical Mag Release Lever • ASG Ultimate 18:5:1 Gear Ratio • ASG Ultimate M95 Spring (Blue) • ASG Ultimate Motor • Airtech Studios Butt Stock Stabilizer • Airtech Studios EHG Enhanced Hop Up Gear • Airtech Studios CHL Charging Handle Lock • x2 Modify 229mm (CQB) & 363mm (SBR) Hybrid 6.03mm Tightbore Stainless Steel Precision Inner Barrels • (New) Modify Baton Ryosuko FLAT hop bucking (Heavy) • Spare Modify BR Bucking with standard nub and inner barrel stabilizer rings • EVO ATEK Magwell Midcap • EVO ATEK Front Handguard • ASG Scorpion Evo Front Support Set • x2 ASG Adaptor 18mm to 14mm • ASG B&T Tracer Unit • Custom Mod SBR Carbon Suppressor • ASG Scorpion Evo Front & Rear Iron Sights • x6 Scorpion Evo 85 rnd Mid Caps in Smoke with Bullets graphic inserts • x6 SAS Elements 3D Printed Fast Mag Bases • G&P DBAL V1 (Black) with IR modes, rare and still goes for £80-100 secondhand. Fully working. • AS-M4 M LOK Angled Forward Grip Black • 45° degree angled 2" Rail • MGP CQB 6" MLOK Rail • FMA Weapon Link - Weapon Link Cage Mount attached to custom loadout, details below. • ASG LiPo/LiFe 30W/3A Balance Charger with Auto Stop • Spare Joker Sticker Decals • Bulldog Fast BB Loader • (New) ASG .25 Blaster Tracer BBs 3300 pcs Green • ASG .28 Cursed BBs 3.6k pcs • Nuprol .32 RZR BBs 3.3k pcs • x6 Pentel Paint Touch Up Markers in Grey • Krylon MAXX gloss smoke grey spray paint can *The RIF has gone a full service (23/04/25) from Bomb Up Airsoft in Warrington. Inspected and stripped down for the gears/seals,electrical connection cleaned/re-greased etc. New owner can request for me to setup the rif to either CQB or SBR using respective parts i.e inner barrel & attachments etc. This is a used airsoft gun so do expect signs of use or wear. RIF is ready to go and be enjoyed fully. All the hassle of it being maintained/serviced has been done and to a high standard. Asking price will include postage fee with Parcelforce 24. Payment via PayPal or Bank Transfer. Any questions regarding with this listing please do not hesitate to message me, thanks£350
-
Time Left: 6 days and 22 hours
- For sale
- As new
BNWT CamelBak hydration pack in DDPM, 2L bladder. Never had fluid in it and still has the seal on the mouth piece. Bought this but then found a 3L at a price I couldn't refuse so selling this on. Will be at Spartan woodland on 1/6/25 so can bring with me to save postage. £25+5 postage£25
-
Bud02 joined the community -
triggerz joined the community -
louiz joined the community -
Time Left: 6 days and 21 hours
- For sale
- Used
Selling due to retirement my upgraded ssg10. Fitted with tridos tdc hop, rapax spring and also wasp piston. £280 cash or transfer on collection. Post but buyer to arrange. Can be left or right handed, left hand bolt fitted.£280
BUXTON, Derbyshire - GB
-
Rogerborg reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
Time Left: 6 days and 21 hours
- For sale
- As new
All in perfect condition. CTM alloy mag floor plate. Retail £22 + postage asking £17 posted CTM alloy magwell. Retail £28 + postage asking £19 posted Action Army official mod adapter. Retail £12 + postagev asking £11 posted.£11
-
Dawsonv1 joined the community -
glockkidd reacted to an advert:
Tokyo Mauri MWS
-
I haven't been since they did the most recent work and, based on photos, am slightly concerned that it seems to be turning into an outdoor CQB site; is that the case? The choke points are a bit of a pain, but unavoidable given the slightly unusual shape of the site. I do miss the old Dragon's Lair.
-
Colin Allen reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
EvilMonkee reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Time Left: 6 days and 21 hours
- For sale
- Used
Tokyo Mauri MWS Repro SLK stock Magpul K2 Repro magpul trigger guard for mws Maddog HRF Maxwell PTS radian Charging handle G&P Sling plate Guns Modify GEI style adjustable trigger Holy Warrior Razor Repro Emissary development hand stop Wadsn Torch Maddog MK18 Rail 3d Printed Hurx suppressor GM Steel bolt release Jaeger Precision Zet Plate Jaeger Precision NPAS Jaeger Precision Nozzle Spring Jaeger Precision Titan Flamingo 60 Angry Gun buffer spring Mad dog Magpul dust cover Jaeger Precision MWS easy loader 5 Leak Free Mags£800
Okehampton - GB
-
Time Left: 6 days and 21 hours
- For sale
- Used
Having a clear out of parts I amassed for projects but am unlikely to get round too. 1. MK18 rail for AEGs does not include sights (will include for extra tenner ) or body / gearbox. £40. 2. M4 Metal Body/ gearbox.. Body comes with body pins and mag release. Unknown manufacturer but decent quality. Has had a respray in the past. Gearbox was sold tome as "V2 Gearbox Complete. - G&G 18:1 gears, fairly new full metal rack piston, fairly new wiring loom fitted with Deans connector. Worked fine when removed from a gun a while back but please consider this as BONEYARD as cannot test power. Connected a battery just now and held a motor onto it and cycles fine in semi and auto." I cannot verify this so as said consider it boneyard. £60 3. Keymod rail, possibly Noveke, comes with barrel nut, outer barrel and Inner barrel with hop unit. £55 4. Classic Army M4 Metal Body with gearbox motor grip and stock pipe.. This is an oldie and seen some use, front body pin and cocking lever are missing ( might have one somewhere ). The fake bolt release is snapped. Does not run.might be as simple as loose wire or could be worse I haven't opened it to see. Comes with the QD sling adapter and a QD Sling Swivel as shown. 5, 13" fluted heavy barrel for M4 AEG. £20 6. 9.5"Outer barrel with Noveske marked Gas block and fake gas tube. £25 7. Not pictured just found it KAC Style RIS for M4A1. £25 I also have some stocks, MOE forends and other bits n pieces that I will post later when I dig em out of storage. If interested in any of these items contact me by PM. Do not ask if I still have items, I will post on comments as items sell. Payment by Paypal buyer to pay fees, postage to UK is included.£12,345
Middlesbrough - GB
-
Time Left: 6 days and 21 hours
- For sale
- Used
Double Bell M416 Tan Crane Stock + Buffer Tube, has seen some fair use, otherwise is still in great condition. Price includes postage.£10
Enfield, Middlesex - GB
-
Tomarundale joined the community -
Time Left: 6 days and 20 hours
- For sale
- As new
Selling my Magpul PRS LITE Stock. Only used this for 20 minutes of game time. Just not my style sadly. Comes with a sling hook aswell. Posted £100 Collected £95 (Sandhurst, Berkshire)£100
- GB
-
Time Left: 6 days and 20 hours
- For sale
- As new
Krytac kriss vector in as new condition (skirmished once): - Suppressor - EoTech 558 replica - angled foregrip - 4 gas tight magazines - Case. Can provide original box also, if wanted (or just proof of picture) Price includes paypal fees and P&P£450
- GB
-
ButcherBill reacted to a post in a topic:
The 'What have you just bought' Thread
-
AlphaBear reacted to a post in a topic:
THE TM MWS thread
-
Time Left: 6 days and 20 hours
- For sale
- Used
VFC? USP 45 metal slide Licensed full trades. 25rd magazine(no leaks) seen minimal use, open to trades: Glock 17,19 sig 226 M&P 9£90
-
Macks airsoft dreamers of the week thread
Cannonfodder replied to Mack's topic in General Discussion
Rule 12
-
Baser reacted to a post in a topic:
Gun picture thread
-
Blimey, I got one of those when they first came out, that brings back memories! The actual red dot is (relative to what we're used to now) absolutely enormous, you do know that don't you? I returned mine because it was way too large (and therefore inaccurate) for the air rifle I had it on. Very cool though, all the same. -
Baser reacted to a post in a topic:
The 'What have you just bought' Thread
-
I'd have a look at the hop rubber too, and probably replace it , also check the O ring on the back of the piston.
-
Time Left: 6 days and 20 hours
- For sale
- As new
New AK Smersh, never used and coming with the original package. Newest generation juste released in 2025 ! If the color seem odd this is becaus of my camera lens Do not hesitate to DM me for more infos 👍 Price is negociable if too expensive for you£250
- FR
-
Chest Rig & Belt - Layouts and Suggestions
Cannonfodder replied to Kha0s's topic in Guns, Gear & Loadouts
It's a full size bottle but the pouch came in a bundle and I found a use for it, rather than buying it specifically for the job. It's definitely way more than needed and is usually only carried for long games or if I'm using the shotgun. -
Time Left: 6 days and 20 hours
- For sale
- Used
All direct action real gear . Quality Mosquito modular belt Mustang inner belt Warhawk nautic belt Tourniquet pouch ( with tourniquet) 2x pistol mag pouch . 1 rifle mag pouch All in great condition and over half the price new£125
