Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2.    Cannonfodder reacted to a post in a topic: E&C recoil
  3. Dumphole

    Time Left: 6 days and 23 hours

    • FOR SALE
    • NEW

    Bought new by me but never used. I only got as far as putting the velcro on the outside. Never worn. Save on rrp. Prince includes postage.

    80.00 GBP

    , Hampshire

  4.    tiggeroo62 reacted to an advert: Genuine Russian Izhmash Mid Cap Magazines
  5. WompRat

    Time Left: 6 days and 23 hours

    • FOR SALE
    • USED

    Here are three genuine Russian Izhmash brand converted magazines. These are real magazine shells that have been converted to accept Airsoft mid caps. They have a steel front and rear insert lip so unlike most Airsoft AK magazines that are mainly all made of plastic which break often, these converts should be good forever since they're designed to originally go into real AK's. Due to the war in Ukraine these magazines have become nearly impossible to buy now and are now significantly more expensive to boot. These are for the collector/impressionist! £80 x1 magazine £240 x3 magazines They feed flawlessly in ALL of my E&L and Cyma AK's and two of the magazines feed flawlessly in all of my LCT AK's apart from magazine "11" which doesn't feed amazingly in just one out of my three LCT's for whatever reason. All three are around 150rds. Just be aware that because these are genuine magazine shells they may not feed well or fit well into your specific AK without a bit of filing but having tested them in all of my AK's I'm fairly certain there should be no issues.

    240.00 GBP

  6. sirbutterbeard
    sirbutterbeard joined the community
  7. Today
  8. Leigh562 left Positive feedback for Predator731
  9. Grave Squirmer

    Time Left: 6 days and 22 hours

    • FOR SALE
    • USED

    I’ll cover cost of fees and postage for purchases over £15. _________________________________________________________________________ Holy Warrior Sig Tango 6T LPVO (illumination control turret need repairing, priced accordingly) - SOLD Tokyo Marui MWS Bolt Carrier w/Angry NPAS Nozzle, Dynamic Precision Sealing Buffer & Guns Modify Nozzle Return Spring - £100 SOTAC M640DFT Scout Light Pro: Spotlight Version (new) - £40 Repro Surfire X300V Light (strobe & white light) - £25 Claymore Device w/Remote Detenator - £40 GoPro Hero3+ (inc 3 batteries, charging dock and water proof case) - £30 Tokyo Marui MWS 250mm Inner Barrel - £20 Boafeng Radio w/Charging Dock - £15 FMA PMAG Double Clamp x2 - £10 Magpul CTR Stock Butt Pad - £5 AIM Kill Flash for M2 & M4 Dot Sights - £5 SOTAC Surefire pressure pad - £5 MLOK Sling Point - £5 Replica Magpul Gas Pedal - £5 Canted Flash Light Mount - £5 Eotech style sight cover flaps - £5

    Ask for price

    - GB

  10. Dreadnought left Positive feedback for Tackle
  11. AbsoluteHeresy13

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    Wts We mp7-a1 (new version) Got this for sale includes 4 gas mags 4 mags tapped for HPA (reversible) 1 mag shell ( needs hammer valve , router and feed lips) Hard case with pluck foam Airtac Fingersaver for loading the mags Value is over 700 Asking for £400 posted 1st class tracked

    400.00 GBP

    Chesterfield

  12. Hawkeye450
    I was looking i to some PTW parts for a project… I have heard a vicious rumour that they fit in WE GBBR receivers… wondering if that might be the case for the Katana Cylinders too. Might be worth a punt? one of the blokes I go airsofting with swears by Defcon and Milspec Solutions. I believe that both are uk based & might have some things in stock. hope that’s of some help.
  13. Tackle left Positive feedback for Dreadnought
  14. gricey01
    gricey01 joined the community
  15.    Muzzer reacted to a post in a topic: Odd issue with Cybergun Perun P90 (Carries on firing for a second or two after releasing trigger on full auto)
  16.    HZR13 reacted to a post in a topic: Macks airsoft dreamers of the week thread
  17. Punisher3990
    Thanks for the suggestion Muzzer, its possible I got some grime or fingerprints on the sensor when I was installing it. Following up from last night post i went to test it again this evening and the full auto was just shooting semi. I recalibrated it and now its full again but it seems odd that happened. Also noted that if i pull the trigger hard enough it does seem to get slightly stuck. Never noticed before because the full auto would kick in long before reaching that point. Worth noting this is only if I pull all the way back with a bit of force. It could just be me hitting the end of where it can go i guess? Unfortunatly I have neighbors so I can't really shoot alot this late which makes it hard to diagnose. Hopefully I can do some proper testing on Friday PS: this is a Cybergun p90 with a stock motor/gearbox
  18.    Punisher3990 reacted to a post in a topic: Macks airsoft dreamers of the week thread
  19.    Tackle reacted to a post in a topic: Macks airsoft dreamers of the week thread
  20.    Galvatron reacted to a post in a topic: Macks airsoft dreamers of the week thread
  21.    Galvatron reacted to a post in a topic: Macks airsoft dreamers of the week thread
  22. Galvatron
    What makes me chuckle even more is that Ultrair isn't the best choice now it's a wee bit nippy outside. People should be looking at "red" or "black" gas now for more consistent cycling. Firesupport makes the seller's case look even worse as you can buy 6 cans in bulk and have change left over for lunch from the £50 the seller presumably wants for all 5 cans.
  23. Muzzer
    Im no expert but it is possible it could be a dirty or malfunctioning optical sensor. Quick test: put a 7.4 V battery on it and try again. If the issue goes away then that kind of confirms it for me. But i would 100% clean the sensor with an appropriate cleaner, anyway.
  24.    Galvatron reacted to a post in a topic: Macks airsoft dreamers of the week thread
  25.    Galvatron reacted to a post in a topic: Macks airsoft dreamers of the week thread
  26. Predator731 left Positive feedback for Leigh562
  27. Jacob Wright
    Storm grip and Diemaco stock arrived. Now the only question is - do I paint it or not?
  28. VonGrimm left Positive feedback for Matt19891947
  29. Petford25 left Positive feedback for Johnboy
  30. Regamuffin

    UH1 Sight

    Regamuffin posted an advert in Gear

    This advert is COMPLETED!

    • FOR SALE
    • NEW

    UH1 sight for sale, working condition price so posted

    45.00 GBP

    - GB

  31. m4zi
    m4zi joined the community
  32. ChrisC98
    ChrisC98 joined the community
  33. Dani930

    Time Left: 6 days and 19 hours

    • WANTED
    • USED

    Looking for the two below - L85A3 Deluxe “Standard issue set” new or used. - L129A1 DMR AEG new or used. Thanks, Dani L129A1

    Ask for price

    - GB

  34. Wildcard996
    Wildcard996 joined the community
  35. Hawkeye450
    So, I’ve had a look through the forum & can’t find any info, so reaching out to anyone who might know. I have had an E&L Mk18 for quite some time now, & pretty happy with the tech side of things. I’ve gutted and upgraded various RIFs from various manufacturers (G&P, G&G, TM, Cyma, Specna Arms, ICS etc) over the years… re-shimming, short stroking gears & pistons, replacing pistons and compression parts, as well as re-wiring and replacing trigger components etc, so would claim to be “competent” when it comes to the inside of a V2 gearbox. Now, the current mechanical trigger is on its last legs, I’m contemplating options… what I want to know is if the E&L v2 gearbox is the same dimensions as a standard V2 (Quick change spring system or whatever), and whether you can just switch it out? pretty sure it’s based off the VFC ambi-gearbox… Anyone able to answer this?
  36. johnnyj
    In my never ended quest for g&p parts got this transformer upper set in a boneyard box..
  37. Harry_Airsoft
    Harry_Airsoft joined the community
  38. Matt19891947 left Positive feedback for VonGrimm
  39. Enid_Puceflange
    Im quite digging the Bazooka Green colours that are coming out That’s look sweet with a sublimated Tiger Stripe shadow airbrushed over it
  40. Adolf Hamster
    Tbf, when i was running the dragonuv i found myself doing that to the point that i basically gave up running the scope at all, not helped by the clip on cheek riser making it impossible to get your head low enough for the irons. But at least that was a quick release mount....
  41. TangoTango
    TangoTango joined the community
  42. EntityManiac

    Time Left: 6 days and 17 hours

    • FOR SALE
    • USED

    1 x Tokyo Marui Scar-H Black Recoil Next Gen 3 x Tokyo Marui 90 RND Mid caps 1 x VP Airsoft LiPo Battery (1300mAh, 7.4v, 25c) 1 x ASG Dot Sight Red / Green 1x30 w/ Mount All kit is practically brand new, barely used. I basically purchased in my early airsoft days, but quickly realised I preferred a faster more lightweight play style Tested and working fine, happy to provide further photo's/video if required. All OEM, no modifications or aftermarket parts. PayPal only. Can post if needed, will confirm shipping costs upon interest.

    450.00 GBP

    Nottingham

  43. Austeyr
    "Hang on mate, don't shoot me! I've got to take my scope off so I can flip up my iron sight!!!!"
  44. Adolf Hamster
    Gotta keep them backup irons available, should one need to engage close up......
  45. EntityManiac
    EntityManiac joined the community
  46. HawkerHarrier
    Is this still available?
  47. HawkerHarrier
    Is this still available?
  48. Mtemprell left Positive feedback for lucaslu1709
  49. Mtemprell
    This fun little mini colt. Looking forward to trying to get a kill with us in a skirmish. Perfect to conceal in a pocket.
  50. Chev Chelios
    Unity's new OMNI mount design is pretty cool.
  51. Chappers504 left Positive feedback for Mookster63
  52. Austeyr
    Probably holding the handguard on, lets be honest. It is S&T after all 😂
  53. Kls77

    Hpa set up .

    Kls77 posted an advert in Parts

    Time Left: 6 days and 16 hours

    • FOR SALE
    • USED

    Moved away from hpa so selling what's left I have. sold as complete lot please AMP hpa line. Only been taken out bag and tested as was spare line Mancraft hrr regulator . All working but dial is stuck Balystik 3000 bottle with ninja SLP 4500 bottle reg Guerrilla carbon 68/4500 bottle , this will need a service and retest but worth it for the bottle regulator alone ( small version)

    160.00 GBP

  54. hjspec

    Time Left: 6 days and 15 hours

    • FOR SALE
    • USED

    The gun works great. Comes with a high cap, 3 printed handguards, barrell nuts, charging handle and spring. You will need to re install the charging handle. Postage is £9

    200.00 GBP

    - GB

  1. Load more activity
×
×
  • Create New...