Cheeky vimto Posted December 20, 2013 Share Posted December 20, 2013 Oh right, I get you. Can you tell me how long it is from one end of the pad to the other then, please. Yeah, I've got 3 single XML T-6 LED torches: 1 is dodgy, 2 are great, so I spose i'll go with Meatloaf on that I'm hoping for 'kin ridiculous from this new'un tho! Edit: actually I've just remembered I have 4 - so 3 out of 4 beats Meatloaf How bright are the good ones? I'm using a small 1600lm ultrafire. It's a good light but I don't think its 1600lms. Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 20, 2013 Supporters Share Posted December 20, 2013 Yeah, they used to offer cashback through topcashback too, but no more. I think my best bet might be to get some MTP ripstop nylon or something similarly lightweight and make a cover for my proper back support. I'll be able to do a few different covers. It's just getting round to it Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 20, 2013 Supporters Share Posted December 20, 2013 This is a single 18650 battery one vs a dual 18650: In the outdoor one, the ambient light has made my phone camera screw up the contrast - the porch lamp across the road isn't really as bright as it seems, the brighter torch can easily light up the wall next to that lamp, but my phone can't see it I was surprised to learn a few months ago that there is no accepted standard way of measuring lumen output, but what I also found out is that 1600 is what a single XML T6 is capable of, according to the manufacturer, not what the torches kick out. I forget the deets now, but I'm pretty sure the voltage wasn't the same as used in these torches anyway... Link to comment Share on other sites More sharing options...
Cheeky vimto Posted December 20, 2013 Share Posted December 20, 2013 This is a single 18650 battery one vs a dual 18650: In the outdoor one, the ambient light has made my phone camera screw up the contrast - the porch lamp across the road isn't really as bright as it seems, the brighter torch can easily light up the wall next to that lamp, but my phone can't see it I was surprised to learn a few months ago that there is no accepted standard way of measuring lumen output, but what I also found out is that 1600 is what a single XML T6 is capable of, according to the manufacturer, not what the torches kick out. I forget the deets now, but I'm pretty sure the voltage wasn't the same as used in these torches anyway... I have a single and a dual one. The dual one is rated 1800lm and the single is 1600lm. I really like the output of the dual but that's the faulty one. Don't suppose you have an extra one? I know they're cheap from china but they take so long to arrive! I thought when the police test out the tint in car windows the machine they use measures lumens? Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 21, 2013 Supporters Share Posted December 21, 2013 Yeah, I think that's right, but I spose their method uses pre-calibrated gear. The thing with commercially available LED's is that there is no standard distance of meter from light source, nor surroundings/reflectors, etc. so while we can reasonably hope that the figures for the products of a given manufacturer should be be consistent with each other, once it comes to various Chinese factories putting LED's in torches, even if the figures they were quoting were the output from the torch, rather than the potential of the LED, we could hardly trust them anyway. It's not just Chinese manufacturers though - that was my main point really: there is no internationally recognised standard for any manufacturer to adhere to so they just make up their own tests. Link to comment Share on other sites More sharing options...
AirsoftTed Posted December 21, 2013 Share Posted December 21, 2013 Yeah, they used to offer cashback through topcashback too, but no more. I think my best bet might be to get some MTP ripstop nylon or something similarly lightweight and make a cover for my proper back support. I'll be able to do a few different covers. It's just getting round to it It's a MTP battle belt for use with the Osprey Ian, they go for around £20 on ebay, I just had a quick look for you and they come in a few different sizes aswell. Could save you the hassle mate! Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 21, 2013 Supporters Share Posted December 21, 2013 Cheers Ted. Cheeky, could you measure the width of the bit that the belt goes through, please? Maybe i can just slide my back protector through one. You could buy my dodgy double battery one off me cheap. It works fine on full power, but the other modes don't work. Link to comment Share on other sites More sharing options...
Cheeky vimto Posted December 21, 2013 Share Posted December 21, 2013 It's made for a 55mm belt to go through. How wide is your back protector? I'm at work today so will have to check later. Link to comment Share on other sites More sharing options...
Mack Posted December 22, 2013 Share Posted December 22, 2013 Couldn't find a tmc one in stock so got the flyye LT6094 instead Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 23, 2013 Supporters Share Posted December 23, 2013 It's made for a 55mm belt to go through. How wide is your back protector? I'm at work today so will have to check later. Most of it is 105mm but the centre of the back is 165mm. Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 23, 2013 Supporters Share Posted December 23, 2013 You mean like this? It looks to me as if the vest will take 2 pouches on either side horizontally. Link to comment Share on other sites More sharing options...
TacMaster Posted December 23, 2013 Share Posted December 23, 2013 Wrong thread, Ian Maybe that's the case- it'd behave a lot more like a standard US LBV in that way as all the pouches on those are at angles to the rest of the rig. If you didn't like it you could always put more grommets in. But if the pouches did mount onto that LBV horizontally, where would the locking plate* go through to get to the studs? I'm guessing that *bellend-shaped metal part at the bottom bends round to lock onto the bottom 2 studs- you'd have to put cuts through the cordura holding the grommets to actually mount the pouches. Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 23, 2013 Supporters Share Posted December 23, 2013 Wrong thread, Ian Yeah, but it's about buying - I did buy the vest and I will buy some pouches for it but just this too: the locking plate* *bellend-shaped metal part at the bottom Really? Not like any I've seen... Link to comment Share on other sites More sharing options...
TacMaster Posted December 23, 2013 Share Posted December 23, 2013 Really? Not like any I've seen... Weeelll... it was easier to describe them that way than,"stereotypical bone shaped end with 2 oval slots on either side which have a larger diameter at the bottom than they do at the top." Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 23, 2013 Supporters Share Posted December 23, 2013 Weeelll... it was easier to describe them that way than,"stereotypical bone shaped end with 2 oval slots on either side which have a larger diameter at the bottom than they do at the top." Nah, now you're just making excuses. Go see the doctor, mate. You know it makes sense Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted December 26, 2013 Supporters Share Posted December 26, 2013 Actually picked this all up a fortnight or so ago but I totally forgot to post somehow. -Salomon Eskape AERO and Peak -More patches for the collection -RA-T NPAS bolt for the LM4 -Magpul logo decals in pink and purple for the G&G -A lower cowling for the 1911 SOC Holster to allow carry of my railed Kimber with a TLR-1 fitted Link to comment Share on other sites More sharing options...
Namaco Posted December 27, 2013 Share Posted December 27, 2013 Decided to buy ContourROAM2 :3 Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Nickona Posted December 27, 2013 Share Posted December 27, 2013 Just ordered a Helikon SFU shirt in OD for my Team and Modern African Merc loadouts. I also just ordered a tan PACA to use with my FR and SEAL loadouts instead of my RG one AirsoftTed 1 Link to comment Share on other sites More sharing options...
AirsoftTed Posted December 27, 2013 Share Posted December 27, 2013 Wheres the PACA from mate? I've found one or two from Japan on Ebay but am hesistant to lay down the cash for what it is before I even get an MBSS or RRV Link to comment Share on other sites More sharing options...
Nickona Posted December 27, 2013 Share Posted December 27, 2013 Second hand. the guy saw my loadout and offered it to me! Ian_Gere, AirsoftTed and Sam_G 3 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 27, 2013 Supporters Share Posted December 27, 2013 I bought a nicely faded Soldier 2000 ripstop DPM Field Jacket t'other day for 99p on fleabay - £5 shipping so if anyone wants a pretty knackered 180/104 (i think - it might be 180/112 and i cba to check right now) S95 jacket for the cost of postage, pm me. I also ended up with a surfeit of PTFE tape, but it would cost more to post than it's fucking worth. Still, if anyone who knows me f2f wants a 12m x 12mm roll, it's 35p Edit: yeah, it is a 180/104 Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted December 27, 2013 Share Posted December 27, 2013 Sig p226-£75 quid posted with 2 mags and chrome slide from the dark side And later today g@g cm18(mk18) mod1 dst-£155 landwarrior Link to comment Share on other sites More sharing options...
Sam_G Posted December 28, 2013 Share Posted December 28, 2013 Not airsoft related but......... Merry christmas and happy birthday to me! Ian_Gere and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted December 28, 2013 Supporters Share Posted December 28, 2013 Got the first of my seasonal/birthday gifts: Pyrohide & Kevlar - but unlike my other ones, padded on the fingers as well as the knuckles - with any luck I'll not need another pair of winter gloves before I die so they're a dead cow well used. CaptainSwoop 1 Link to comment Share on other sites More sharing options...
Russe11 Posted December 28, 2013 Share Posted December 28, 2013 Got the first of my seasonal/birthday gifts: Pyrohide & Kevlar - but unlike my other ones, padded on the fingers as well as the knuckles - with any luck I'll not need another pair of winter gloves before I die so they're a dead cow well used. ...until next winter, when you can't remember where you put them Just ordered a lanyard and holster for my H&K MK23 Socom: I went minimalist with the holster as it seems difficult to get a holster for such a big pistol and this should allow me to holster it with the silencer on. Hazard 4 Stick-Up Universal Military Velcro Holster Also ordered some .25 green BB's so I can try heavier ammo without getting the 2 types mixed up CaptainSwoop and Ian_Gere 2 Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now