Haru Posted August 14, 2023 Share Posted August 14, 2023 I have the cyma plat mp5 upgraded version from patrolbase, I'm currently running with 7.4v lipos and the gun feels really nice. Patrolbase recommends 11.1v but I've heard stories of cyma mosfets burning and some say they've fixed that problem with the new batch. Can anyone shed some light on this? Link to comment Share on other sites More sharing options...
Impulse Posted August 14, 2023 Share Posted August 14, 2023 I don't know what voltage he was using, but I know someone who had the Cyma platinum mp5 and his mosfet burned out. Not the end of the world, he just replaced it with a Perun, as the stock Cyma mosfets aren't the greatest. Link to comment Share on other sites More sharing options...
Haru Posted August 14, 2023 Author Share Posted August 14, 2023 29 minutes ago, Impulse said: I don't know what voltage he was using, but I know someone who had the Cyma platinum mp5 and his mosfet burned out. Not the end of the world, he just replaced it with a Perun, as the stock Cyma mosfets aren't the greatest. yeah, figured the mosfet will burn eventually, wondering what the life expectancy will be with 11.1s tho. I'd like to get a good amount of use out of it before needing to replace anything Link to comment Share on other sites More sharing options...
Leo Greer Posted August 14, 2023 Share Posted August 14, 2023 The issue with the CYMA is not a MOSFET. A MOSFET is a chip that allows the vast majority of the power to flow directly from the battery to the motor, instead of through the trigger contacts. The issue is with the trigger mechanism, which is a very small microswitch. When unprotected microswitches experience vibration, the contacts bounce, causing current to switch on and off sometimes thousands of times a second. This causes immense heat build up, and burns these units out quickly. It’s impossible to predict exactly when they will burn out. I’ve seen some burn out within a couple games, and some last for more like 3-4 game days. They will do this on any battery, as it’s not the voltage but the current doing the damage due to CYMA’s design flaw. It’s a critical issue with the series and I don’t know why people recommend them. As long as people are still buying, CYMA isn’t fixing. You can replace them flatly for an excellent Perun Hybrid ETU. P47 and SSPKali 2 Link to comment Share on other sites More sharing options...
Haru Posted August 14, 2023 Author Share Posted August 14, 2023 51 minutes ago, Leo Greer said: The issue with the CYMA is not a MOSFET. A MOSFET is a chip that allows the vast majority of the power to flow directly from the battery to the motor, instead of through the trigger contacts. The issue is with the trigger mechanism, which is a very small microswitch. When unprotected microswitches experience vibration, the contacts bounce, causing current to switch on and off sometimes thousands of times a second. This causes immense heat build up, and burns these units out quickly. It’s impossible to predict exactly when they will burn out. I’ve seen some burn out within a couple games, and some last for more like 3-4 game days. They will do this on any battery, as it’s not the voltage but the current doing the damage due to CYMA’s design flaw. It’s a critical issue with the series and I don’t know why people recommend them. As long as people are still buying, CYMA isn’t fixing. You can replace them flatly for an excellent Perun Hybrid ETU. funnily enough my cyma has stopped working after a single skirmish. just waiting for my perun hybrid to come through the mail now. hopefully i dont make it any worse than it already is Link to comment Share on other sites More sharing options...
Leo Greer Posted August 14, 2023 Share Posted August 14, 2023 53 minutes ago, Haru said: funnily enough my cyma has stopped working after a single skirmish. just waiting for my perun hybrid to come through the mail now. hopefully i dont make it any worse than it already is The Perun should be a flat drop in replacement, so assuming you can get the gearbox back together correctly (YouTube is amazing here), you’ll be doing well. Link to comment Share on other sites More sharing options...
P47 Posted February 13 Share Posted February 13 On 14/08/2023 at 15:39, Leo Greer said: The issue with the CYMA is not a MOSFET. A MOSFET is a chip that allows the vast majority of the power to flow directly from the battery to the motor, instead of through the trigger contacts. The issue is with the trigger mechanism, which is a very small microswitch. When unprotected microswitches experience vibration, the contacts bounce, causing current to switch on and off sometimes thousands of times a second. This causes immense heat build up, and burns these units out quickly. It’s impossible to predict exactly when they will burn out. I’ve seen some burn out within a couple games, and some last for more like 3-4 game days. They will do this on any battery, as it’s not the voltage but the current doing the damage due to CYMA’s design flaw. It’s a critical issue with the series and I don’t know why people recommend them. As long as people are still buying, CYMA isn’t fixing. You can replace them flatly for an excellent Perun Hybrid ETU. I bought one of these a year or so ago. Barely used, as I love the look and don't want to ruin the rif outside. I've only used 2s and .28's, and find it more than adequate. I've watched YouTube and read forums and it seems if you run it with 3s you will burn the MOSFET quickly. I may get a perun (or similar), ahead of time and be ready for the inevitable. This MP5 is too nice to be stuck on the wall or the back of a cupboard... Austeyr, Galvatron and Tackle 2 1 Link to comment Share on other sites More sharing options...
Colin Allen Posted February 13 Share Posted February 13 4 hours ago, P47 said: I bought one of these a year or so ago. Barely used, as I love the look and don't want to ruin the rif outside. I've only used 2s and .28's, and find it more than adequate. I've watched YouTube and read forums and it seems if you run it with 3s you will burn the MOSFET quickly. I may get a perun (or similar), ahead of time and be ready for the inevitable. This MP5 is too nice to be stuck on the wall or the back of a cupboard... The weight of BBs used will not have any impact on the longevity of the trigger unit. Cannonfodder 1 Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted February 14 Moderators Share Posted February 14 17 hours ago, P47 said: I bought one of these a year or so ago. Barely used, as I love the look and don't want to ruin the rif outside. I've only used 2s and .28's, and find it more than adequate. I've watched YouTube and read forums and it seems if you run it with 3s you will burn the MOSFET quickly. I may get a perun (or similar), ahead of time and be ready for the inevitable. This MP5 is too nice to be stuck on the wall or the back of a cupboard... Who ever said this on a Youtube video, unsubscribe immediately Anonymoose and Tackle 1 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted February 14 Moderators Share Posted February 14 17 hours ago, P47 said: I've watched YouTube and read forums and it seems if you run it with 3s you will burn the MOSFET quickly. I may get a perun (or similar), ahead of time and be ready for the inevitable. Youve been here for over two years, and THAT'S your first post ........ DanBow, Jez_Armstrong and Cannonfodder 3 Link to comment Share on other sites More sharing options...
Austeyr Posted February 14 Share Posted February 14 17 hours ago, P47 said: I bought one of these a year or so ago. Barely used, as I love the look and don't want to ruin the rif outside. I've only used 2s and .28's, and find it more than adequate. I've watched YouTube and read forums and it seems if you run it with 3s you will burn the MOSFET quickly. I may get a perun (or similar), ahead of time and be ready for the inevitable. This MP5 is too nice to be stuck on the wall or the back of a cupboard... I hate when my .5g bb’s mess with my bolt action mosfet 😔 Galvatron and Tackle 2 Link to comment Share on other sites More sharing options...
The_Lord_Poncho Posted February 14 Share Posted February 14 Actually, I wonder if the '3s' comment was actually referring to an 11.1 battery - 11.1 three cell batteries are frequently (especially in RC car territory) referred to as being '3s'. What the guy was saying is that he has happily run on a 7.4 without a drama, but he had heard that 11.1 may risk the mosfet (which is true). There - i bet you all feel bad now for taking the p$ss!! Link to comment Share on other sites More sharing options...
Moderators Tackle Posted February 14 Moderators Share Posted February 14 1 hour ago, The_Lord_Poncho said: Actually, I wonder if the '3s' comment was actually referring to an 11.1 battery - 11.1 three cell batteries are frequently (especially in RC car territory) referred to as being '3s'. What the guy was saying is that he has happily run on a 7.4 without a drama, but he had heard that 11.1 may risk the mosfet (which is true). There - i bet you all feel bad now for taking the p$ss!! Don't you dare give him a "get out of jail free card", & spoil all our fun🤣 Colin Allen 1 Link to comment Share on other sites More sharing options...
Anonymoose Posted February 14 Share Posted February 14 1 hour ago, The_Lord_Poncho said: i bet you all feel bad now for taking the piss!! Never. Tackle and Cannonfodder 2 Link to comment Share on other sites More sharing options...
The_Lord_Poncho Posted February 14 Share Posted February 14 Ha, sorry. I mean, bringing RC car terminology onto this forum, it's all fair game! Tackle 1 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted February 14 Supporters Share Posted February 14 20 hours ago, The_Lord_Poncho said: Actually, I wonder if the '3s' comment was actually referring to an 11.1 battery Don't you dare bring context into our ignorant rants. 😠 On topic, I run everything on 11.1V now, if I can physically fit one. If you're into buying 3-figure toys that are guaranteed to hang on a wall for almost all of the time, why fret over the possibility that one component might fail? Especially when you can replace anything, or bypass it with 20p of wire and solder. Tackle and Galvatron 2 Link to comment Share on other sites More sharing options...
ButcherBill Posted February 15 Share Posted February 15 12 hours ago, Rogerborg said: If you're into buying 3-figure toys that are guaranteed to hang on a wall for almost all of the time OI, DON'T DRAG ME INTO THIS. 😉 Anonymoose, Tackle and Rogerborg 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now