alex001 Posted December 29, 2022 Share Posted December 29, 2022 2 hours ago, alex001 said: IMG_9283.MOV 2.38 MB · 0 downloads Feeding/magazine help… Hi gents, hoping you can help. I have an issue with feeding on some particular mags, some are better than others but the issue can still occur on the goods mags. As you can see on the video, it doesn’t like to feed until I press the bottom of the mag forwards. It’s a rather intermittent issue but the video shows it at its worst. I think it has something to do with the alignment of the hop unit entry tripping the bb release on the mag but I wondered if anyone has had similar issues and how they solved it. I’ve reassembled multiple times and can’t see anything out of the ordinary. any help or suggestions appreciated 👍🏻 So I think I’ve found a solution to my issue. After some further tinkering, I found that putting a rubber washer underneath the mag insert allows the insert to raise up just a fraction once tightened down to the case. Now all mags feed flawlessly. hopefully this will help others. Hatchet and Cocha 1 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted December 29, 2022 Supporters Share Posted December 29, 2022 When were you pressing strongly forward against the bottom rear of the magazine? Link to comment Share on other sites More sharing options...
alex001 Posted December 29, 2022 Share Posted December 29, 2022 1 hour ago, TheFull9 said: When were you pressing strongly forward against the bottom rear of the magazine? I’m pressing the mag against my knee Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted December 29, 2022 Supporters Share Posted December 29, 2022 I saw but when was that happening in use? The only thing I can think of is mono-pod'ing off the mag which I've never seen with an SMG. Still better to fix it if all else remains equal, no denying it, just wondering how the problem came up. Link to comment Share on other sites More sharing options...
alex001 Posted December 29, 2022 Share Posted December 29, 2022 (edited) Unfortunately it happened on my first proper skirmish with it. All seemed fine when I tested it out in the garden, but I only used the mag it came with. I’ve had new mags sat in their packaging until only recently and I then found out these started to misfeed. I have 4 mags total, the one it came with in the box seemed to feed the best, the rest were hit & miss, the one in the video in particular was the worst. So either I’ve been unlucky with my mags, my hop feed tube is slightly too short or my mag catch is not seating the mags in far enough. I’d guess the latter. Edited December 29, 2022 by alex001 Link to comment Share on other sites More sharing options...
Keith_1701 Posted December 31, 2022 Share Posted December 31, 2022 This mine. Just got the arrow dynamics mlok rail today to finish off my build JimFromHorsham 1 Link to comment Share on other sites More sharing options...
Hatchet Posted January 7, 2023 Share Posted January 7, 2023 An update, Combat South have repaired it using the method mentioned elsewhere of taking another piston (I think AK, but didn't check) and modifying it. Firing okay now. My next puzzle is why the charging handle doesn't release sometimes without a bit of a tap forward. Cleaned it last time I had it apart, it just feels like it's binding slightly. I am wondering if the environment I've been playing in has just caused it to wear. Perhaps it's the old story of the better the tolerances, the less they like getting crap in there. I shall probably be keeping this one for days at urban sites rather than a standard woodland gun I think... Link to comment Share on other sites More sharing options...
SonnyMP5 Posted January 7, 2023 Share Posted January 7, 2023 Hey guys. To the people that have swapped out the sliding stock for something different are they interested in selling the original sliding stock? Link to comment Share on other sites More sharing options...
pulguitel Posted January 8, 2023 Share Posted January 8, 2023 On 29/12/2022 at 14:51, alex001 said: So I think I’ve found a solution to my issue. After some further tinkering, I found that putting a rubber washer underneath the mag insert allows the insert to raise up just a fraction once tightened down to the case. Now all mags feed flawlessly. hopefully this will help others. hello!!! and happy 2023! I had the same issue, and i tried several ways adding some velcro in dirrent parts of the mag and the mag well.... i will try this solution, THANKS!! what is the size of the washer I assume a round one should be ok but what thickness?? thanks! Link to comment Share on other sites More sharing options...
alex001 Posted January 13, 2023 Share Posted January 13, 2023 Hiya mate, hopefully this should help… i couldn’t tell you where I got them I’m afraid, they were just laying in the spare parts box. Link to comment Share on other sites More sharing options...
Cipher-032 Posted January 15, 2023 Share Posted January 15, 2023 Has anyone done stuff with the hop up? I know it takes AEP rubbers. Link to comment Share on other sites More sharing options...
mightyjebus Posted January 20, 2023 Share Posted January 20, 2023 if anyone is looking for a tracer unit that fits the tri-lug on the TM MP5 NGRS then I can confirm the Omega 9K version fits. bonus is it comes with a couple of different ends so you can fit it to your other AEG's if they are -14mm https://shop.jkarmy.com/rgw-omega-9k-dummy-silencer-tracer-full-set-mp5-style.html TheFull9 1 Link to comment Share on other sites More sharing options...
AttackPlatypus Posted January 22, 2023 Share Posted January 22, 2023 Posted a little while back. Thought I'd show an updated light mounting solution using the midwest industries rail (CYMA clone). Works really nicely! Top down view too to show the way it's mounted. TheFull9 1 Link to comment Share on other sites More sharing options...
Cipher-032 Posted January 22, 2023 Share Posted January 22, 2023 Sourced a Magpul Handguard for it at last. lokkers, JimFromHorsham and Shamal 3 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted January 25, 2023 Popular Post Share Posted January 25, 2023 here's some pictures of the Omega 9 tracer. Wavey_Gravey, TheFull9, lokkers and 5 others 5 3 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted January 25, 2023 Share Posted January 25, 2023 https://impulse101.jp/en/next-generation-mp5-series-parts/tokyo-marui-spare-parts-next-gen-mp5-series-mp5sd-upper-receiver-assembly-5698 interesting Hatchet 1 Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted January 25, 2023 Share Posted January 25, 2023 Oh damn. That’s a nice option to have. JimFromHorsham 1 Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted January 27, 2023 Share Posted January 27, 2023 Does anybody have a lead on any mags, preferably in the UK? Potentially have an SD6 waiting for me but with no mags… Link to comment Share on other sites More sharing options...
JimFromHorsham Posted January 27, 2023 Share Posted January 27, 2023 2 hours ago, Wavey_Gravey said: Does anybody have a lead on any mags, preferably in the UK? Potentially have an SD6 waiting for me but with no mags… A few places have 200rd hicaps , but nowhere seems to have the midcaps . Why U.K. only ? Just for ease ? tbh if you want the SD6 and you can get one I’d just go for it and worry about mags later on 😛 Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted January 27, 2023 Share Posted January 27, 2023 Yeah ideally want them here before next Sunday so UK would be ideal. This is going to be my first NGRS, last time I even had an AEG was couple of years ago so I’m hoping this bridges the electric / gas gap for me. I can game with 1 mag…right?! 🥲 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted January 27, 2023 Share Posted January 27, 2023 30 minutes ago, Wavey_Gravey said: Yeah ideally want them here before next Sunday so UK would be ideal. This is going to be my first NGRS, last time I even had an AEG was couple of years ago so I’m hoping this bridges the electric / gas gap for me. I can game with 1 mag…right?! 🥲 hicaps it is then 🤪 Wavey_Gravey 1 Link to comment Share on other sites More sharing options...
MrTea Posted January 27, 2023 Share Posted January 27, 2023 (edited) . Edited January 27, 2023 by MrTea Link to comment Share on other sites More sharing options...
JimFromHorsham Posted January 31, 2023 Share Posted January 31, 2023 On 25/01/2023 at 19:06, JimFromHorsham said: https://impulse101.jp/en/next-generation-mp5-series-parts/tokyo-marui-spare-parts-next-gen-mp5-series-mp5sd-upper-receiver-assembly-5698 interesting well that escalated much quicker than I anticipated 😛 Wavey_Gravey 1 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted January 31, 2023 Share Posted January 31, 2023 (edited) Interestingly they’ve now removed the link / deleted the advert … I wonder if someone somewhere shouldn’t have been selling these parts yet ? as expected though , very much a big bag of bubble wrapped parts and not a “kit” as such . The option to run a -14mm silencer instead of the standard one is also welcome they were also Listing complete hop units so I grabbed one of those too , anyway … it’s tool time 🤪🛠️🪚🪛🔧 Edited January 31, 2023 by JimFromHorsham Link to comment Share on other sites More sharing options...
mightyjebus Posted January 31, 2023 Share Posted January 31, 2023 lucky you. my impulse MP5SD6 has been stuck in customs since the 3rd Jan! JimFromHorsham 1 Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now