SonnyMP5

M4 Mk16 ngrs TM NGRS Started life as a M4A1 now fitted with a HAO mk16 rail, an original PTS Magpul CTR stock and PTS EPG grip. Internally Polished and radius gearbox FPS steel bushings FPS carbon reinforced piston & head Prommy gears Lonex helical pinion and bevel gear Prommy tappet plate Prommy cylinder head Prommy nozzle Jefftron leviathan ETU Flat blade trigger Boost 30k motor Edgi barrel with R hop patch. Harder recoil spring All work down at local shop (CamoRaids) Been main gun for nearly 2 years now so marks and scratches from use, shoots beautifully and has been serviced within the last 6 months when I had the piston changed for the new reinforced FPS piston. Fancy going back to MP5 platform so up for sale. The battery goes in the Modified (trimmed down and machined back up) eagle AoR2 grenade pouch on the stock to mimic the Forex 401 pouch's on stocks. Comes with 4 mid caps and battery pouch. Sight and torch not included. £600 with postage and PayPal included Cash is king in person for a deal if your local. If your local to Benfleet in Essex can meet at Camo's shop to test out before hand. Trade for NGRS MP5 only

TM MP5A5 NGRS Used at the local shooting range when I first got it but been stored in a peli case with accessories for months now. Couple of marks from being moved around/handled and stored with another RIF. Maybe fired 1 mag or 2 when I first got it at the range. Just received 5 new mid caps mags from JPN so gun will come with 6 mids in total, been waiting on mags before I put up for sale. Have an old claw mount and QD gemtech suppressor I'll chuck in as no need for them. Connector is now a deans but I can change to xt30 if required. £600 all in with postage and fees. Located in Essex so can do a deal in person if your local

Started life as a ngrs cqbr then modded a G+P carry handle upper and outtrr barrel to fit the TM lower. Internally; Polished and radius gearbox Steel bushings Shimmed AOE correction Laylax hardened gears with helical pinion and motor gear. Fsp prototype full steel teeth piston and head. Gate titan Prometheus tappet plate 30k boost motor Edgi 5.98m barrel r hopped (lift anything you wanna use) Stronger recoil spring Being full steel teeth I run it on 11.1v batteries for any extremely snappy trigger response. This Rif being front wired the spring can be easily swapped out for different FPS depending on sites you play at. Front wired into the hand guard so can run bigger battery's. Real steel car-15 stock and pad 4 mid cap mags. 2nd and 3rd pics are how it looks atm paint will clean off with spirits if not your taste. Have a the aimpoint comp2 available for extra from the first photo.£200

In any condition really. Discontinued few years ago hoping someone might have one they don't use/want to sell.

Brand new unused TM mp5 ngrs plus 7 mags. Converted to xt30 connection to save room in the handguard. Mags didn't arrive before I last had a chance to play so has been sat in the box gathering dust for couple of months it is why some mags are still boxed up. Will include 2 lipos with xt30 connectors and I have an magpul guard that I'll chuck in as I have no use for it. Location Benfleet Essex but I'm happy to post. £730 (PayPal goods only, includes fees) Would cost £850+ if you could get the gun or mags. Will not sell mags separately I would like who ever buys to be able to use it. No trades.

Started life as the MTR16 basically a fully ambidextrous MWS. Externally Angry gun mk16 rail 9.3 Twist fluted original outer barrel machined and thread to 10 barrel to suit rail. PTS CTR stock. Angry gun mil spec buffer G&P Mod 0 QD suppressor Kac style fire selector geissele ambi charging handle. Internally. Edgi 6.01 inner barrel Autobot rubber with omega nub 140% nozzle return spring G&P CNC npas (I've tried all the mws npas versions and this is best personally) Been main gun for a long time now, never needed anything other than nozzle return spring which is common. Just good clean every few months when I was playing. Gun is used scuffs etc but nothing broken or abused. Has some paint pen on the receiver that will clean off with some spirits. Only scratch is from the charging handle when the split pin came lose few years ago can see it in the photos of the ambi handle pulled back. 7 mags all with recent new fill valves. Few mags have the silent fill o ring installed. Vortex sparc AR has been rattle canned in the past but optic is clear as the day I got it. Reason for sale been sitting on a rack for the last 7 months gathering dust.

Angry gun colt liscenced m723 receiver set for TM MWS super hard to get hold of now. Comes with everything you need for an old school carry handle build. Comes with. Upper/lower receiver Outer barrel with front sight and flash hider Slim handguard Carry handle sight mount. M16 steel end plate. Dummy suppressor Car15 stock with butt pad. Grip. Included couple of pictures of the gun built up for reference. Has some over spray on the receiver to make it look used/old. Ejection port side of receiver missing small round dummy pin cap. Handguard and stock are new.

Condition doesn't matter too much. As long as all parts still with it. Not to worried about mags either.

TM NGRS MP5 SD6 conversion. The gun has been used once at longmoor and since then hanging up and I don't see myself using it any time soon I'm truly a GBBR user I thought that this might convert me back to electric but no. The gun is upgraded internally with. Custom edgi RHop'd barrel will lift any BB weights. 285mm length Bearing spring guide Stronger spring AOE correction and sorbathane pad FLT CNC steel bushings Cylinder head. Lonex steel gears with helical bevel and pinion. Cleaned, shimmed and lubricated The only mod to the original gun for the conversation was the removal of the front iron sight which was push fit to begin with so it can easily be changed back to A5 standard, will obviously include original handguard and iron sight. The new front sd6 sling mount had to be modified so that the original TM front ended didn't need machining, it's solid with no movement but I only used it with a single point sling to the rear as I feel it could get damaged with carelessness. Has a longer barrel than standard (285mm) it's just the right length so that a xcortech tracer fits inside the suppressor. Comes with 5 mags. 2 of the mags have been converted to real steel mags (will include the original sleeve if you wanted to change back) being a SD6 front end plenty of room for bigger batteries than the A5. The gun shoots beautifully and alot of time and effort went into the conversion/build as well as money. I'd rather it be collected just so you can see it in person before hand and cash is king so always offer better deal in person. Not desperate to sell but I don't expect to get back what it cost me with machining and labour/parts Any extra pictures and questions please do ask. I'm in Essex if anyone would like to view the gun also can be arranged at CAMORAIDs on canvey. Last picture is one of the real steel mags with the TM insert these came out great.

After boneyard SD6 or upper parts for one. Thanks

Complete racal headset with adapter for earmor PTT. Earmor PTT for boafang Spare recal unit. Pouch for racal. Includes postage

Brand new in box DBAL A² Visible laser ,IR laser and illuminator. Impulse buy as hard to get hold of but realistically not going to be used. £200 on fire support now! £140 collected Essex £150 posted PayPal only.

Looking for RAS l handguard rail in the picture. Doesn't need to be new or have the covers or grip for that matter.