Jump to content

Anyone Got Any L1a1/Fn Fal Recommendations?


This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Anybody know where the best place is to buy an L1A1/FN FAL AEG

 

Seen a few but they seem to be out of stock most places, also one thing I have noticed is there doesn't seem to be too many different ones on the market.

 

If anyone could point me in the right direction I would appreciate it. 😄 

Link to comment
Share on other sites

patrolbase has a few versions but out of stock

 

found this one but it's pricey

 

https://airsoftdirect.uk.com/product/ares-l1a1-slr/

Link to comment
Share on other sites

The Ares one if pretty terrible in terms of trigger and weak gearbox design. As in, cracks in the front of the gearbox within a few skirmishes type weak. The King Arms one is considered to be infinitely better. 

Not alot of King Arms one out there as they were fairly limited run. 

 

If your Italian is any good then there is one available here. 

 

https://www.softair-italia.it/l1a1-type-king-arms-p-1024.html

Link to comment
Share on other sites

20 minutes ago, Skara said:

 

Wouldn't bother with Ares tbf.

King Arms maybe?

 

I withdraw my comment and hang my head in shame 😂

Link to comment
Share on other sites

24 minutes ago, Asomodai said:

the owner's a bit of a retard, knows fuck all about mechanical stuff, but his shop is literally filled with rare guns.

Bought a couple of things from him, but went directly to the shop as it's only 40 minutes away from me.

5 minutes ago, strykerles said:

I withdraw my comment and hang my head in shame 😂

Ares. That's all there's to know :P

Link to comment
Share on other sites

1 hour ago, Skara said:

the owner's a bit of a retard, knows fuck all about mechanical stuff, but his shop is literally filled with rare guns.

Bought a couple of things from him, but went directly to the shop as it's only 40 minutes away from me.

Ares. That's all there's to know :P


In fairness that seems to be the cheapest one around as well (not that I want to specifically cheap out but if a deals there I’m taking it).

 

I wasn’t aware that it’s rare in airsoft form, trust me to be like “oh that L1A1 would be nice to have” 😂

Link to comment
Share on other sites

Oh yeah, if it's cheaper and in stock definitely go for it.

Just let me know if something goes wrong :P takes only 40 minutes to drive there with a can of fuel and a lighter ;)

Link to comment
Share on other sites

One in at Dave's:

 

https://www.davescustomairsoft.co.uk/AresL1A1SLR?search=L1a1

 

Or if you fancy a custom built one of a kind L2A1......

 

https://www.davescustomairsoft.co.uk/Ares-DCA-L2A1-LMG?search=L2a1

 

 

Link to comment
Share on other sites

It's more like quirky proprietary parts, to be fair. If they break and the gun isn't as popular (low amount of spares available) then you're kinda screwed if one of those parts shits the bed.

Link to comment
Share on other sites

They aint cheap

https://www.fire-support.co.uk/product/ares-l1a1-slr-new-2016-aeg-airsoft-gun

 

If you have UKARA you could get this but with Covid it may take a Loooooooooong time to arrive.

http://www.asiaairsoft.com/index_eproduct_view.php?products_id=8367

https://airsoft.tiger111hk.com/p32803/ARES-L1A1-SLR-FN-FAL-AEG-Rifle-(Black)/product_info.html

 

I wonder if a company will make them again...?

Link to comment
Share on other sites

There was supposed to be a re-release by king Arms of their FAL series. Was meant to be the latter half of this year,

that was pre Covid  though...

Link to comment
Share on other sites

It's a matter of being economically worth.

If a gun is uncommon (there's not enough demand to justify continuous production) it's unlikely that it'll ever be produced again.

Link to comment
Share on other sites

That's true, the G3 is well served. CA and LCT have plenty of variants.  See that LCT is bringing out a line of HK33s.

Perhaps the VFC FAL will encourage some AEG based models.  

Link to comment
Share on other sites

Fire Support have one or two.

 

I never had any bother with my Ares one, shot nicely enough.  The KA one is due a rerelease and VFC are doing a GBBR FAL soon.

Link to comment
Share on other sites

7 hours ago, EvilMonkee said:

Fire Support have one or two.

 

I never had any bother with my Ares one, shot nicely enough.  The KA one is due a rerelease and VFC are doing a GBBR FAL soon.


I may hold fire and see what’s going on with the rerelease, then make a decision.

 

Cheers for the links guys though, turns out there’s more on the market than I first thought 😂

Link to comment
Share on other sites

I'd be of the inclination to wait for King Arms to re-release theirs. The L1A1 platform and the FN FAL definitely look like they could be a lot fun although I wouldn't want to be stuck in CQB with one. 😂

 

On a personal note, I wish LCT would release the G3KA4 although in saying this I also wish the prices would drop back down to pre-Nuprol levels of interference. Or at least see bit of a price reduction to the point where it was a middle ground between how it used to be and now.

Link to comment
Share on other sites

3 hours ago, daltonwilliams said:

I may hold fire and see what’s going on with the rerelease, then make a decision.

Cheers for the links guys though, turns out there’s more on the market than I first thought 😂

Keep an eye out in classifieds as they do come up from time to time (not just here)

That's how I got mine

Link to comment
Share on other sites

Was looking at King Arm's social media presence (partly due to this thread) and they stated that the re-release would be the end of 2020.

Might be a useful to someone.  Will be putting aside some cash for one myself.   

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...