TommoThomson Posted January 15, 2020 Share Posted January 15, 2020 Morning folks, well as the title says I'm really looking for ideas on a DMR as I'm so lost in what to go for. As a player I have always been drawn to compact, hence having a Krytac Trident MKII PDW and whilst that's hitting targets out at 65 meters I need something with a little more range. The thing is I don't think and please correct me if I'm wrong I can get a Bullpup , which would be my ideal choice as well just buying a good solid AEG is a minefield as nothing fits any of them so its trial and error just to keep one running let alone converting it to be a DMR so that doesn't really leave a lot left on the table. So I thought I would put a shout out and get some ideas and see what can be done on what platforms, with that said and if you bored and fancy showing off your hardware instead of working today feel free to show off what you got. Link to comment Share on other sites More sharing options...
Asomodai Posted January 15, 2020 Share Posted January 15, 2020 Why couldn't you get a bullpup? The ASP SVU would make an ideal DMR. Most rifles will need converting though as there are very few out of the box DMRs. The Ares Soc SLR is also available. Link to comment Share on other sites More sharing options...
Skara Posted January 15, 2020 Share Posted January 15, 2020 Get a gun you like. Buy a mechanical HPA engine (no batteries to worry about, you're locked to semi and can tune the energy output) Get a nice quality barrel and hop rubber /thread Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted January 15, 2020 Share Posted January 15, 2020 3 hours ago, Skara said: Get a gun you like. Buy a mechanical HPA engine (no batteries to worry about, you're locked to semi and can tune the energy output) Get a nice quality barrel and hop rubber /thread I would second this, my dmr is hpa semi only and I can run around at 350fps at sites that don’t allow dmr and with a twist of the regulator it’s a dmr. No stress on gearboxes plus it’s super quiet Link to comment Share on other sites More sharing options...
TommoThomson Posted January 15, 2020 Author Share Posted January 15, 2020 9 hours ago, Asomodai said: Why couldn't you get a bullpup? The ASP SVU would make an ideal DMR. Most rifles will need converting though as there are very few out of the box DMRs. The Ares Soc SLR is also available. I know we have spoken before in the past about the good the bad and the darn right awful in Bullpups and it was more a I didnt think I could really find a good build that was good as standard let alone that I could upgrade. An did you ever get your type 97, it was on the way last time we spoke and Ares Soc SLR is something I was thinking of getting, but its still so new out its like can you do much with it and I wouldn't mind ago before I bought one. As for the HPA root Skara, osteoshot I find that I'm not missing it tbh after playing paintball for a few years and I like it that I can just charge a battery and sling some plastic about whenever and dont have to worry about running out of air Link to comment Share on other sites More sharing options...
Nick G Posted January 15, 2020 Share Posted January 15, 2020 A mate has an AUG as a DMR, it's the 'sniper ' version with a fluted barrel etc. Very easy to set to semi only and the damn thing is annoyingly good ! Link to comment Share on other sites More sharing options...
Asomodai Posted January 15, 2020 Share Posted January 15, 2020 5 hours ago, TommoThomson said: I know we have spoken before in the past about the good the bad and the darn right awful in Bullpups and it was more a I didnt think I could really find a good build that was good as standard let alone that I could upgrade. An did you ever get your type 97, it was on the way last time we spoke and Ares Soc SLR is something I was thinking of getting, but its still so new out its like can you do much with it and I wouldn't mind ago before I bought one. As for the HPA root Skara, osteoshot I find that I'm not missing it tbh after playing paintball for a few years and I like it that I can just charge a battery and sling some plastic about whenever and dont have to worry about running out of air Yes I got both my T97's, took months but they are here! The Ares SOC-AR is pretty much fully upgradable, though spare parts for the trigger control unit and gearbox shell might be a hassle. You can replace the barrel, hop unit, all of the internal part of the gearbox. It IS heavy. Accuracy is pretty crap out of the box, but I am working on that as we speak! I don't think you will get much more information on the SLR, its not a popular gun and made in limited numbers. I reckon it would be pretty good with a barrel and hop upgrade though. As for other bullpups. If you want something that would need to be a real world DMR (Or something plausible at least). I would go with either the SOC SLR or the SVU. The SVU is a little limited because of the 4th gear, but you can upgrade everything with Real Sword SVD parts. Combat Union make a tip top Hop unit replacement as well. My SVU has been fully upgraded and its pretty snazzy to use! If you are less worried about real world bullpup DMRs then you can take a look at any of the long style AUGS on Gunfire, they are easy to work on, fairly good parts availability and would work well as a DMR. OR look at the APS UAR, which is essentially like the SOC-AR, an M4 inside. If you want something futuristic looking that has great parts compatibility but not necessarily a bullpup. Look at the JG SL8/SL9. Essentially its all G36 inside so can take any number of parts. Link to comment Share on other sites More sharing options...
TommoThomson Posted January 16, 2020 Author Share Posted January 16, 2020 7 hours ago, Asomodai said: Yes I got both my T97's, took months but they are here! The Ares SOC-AR is pretty much fully upgradable, though spare parts for the trigger control unit and gearbox shell might be a hassle. You can replace the barrel, hop unit, all of the internal part of the gearbox. It IS heavy. Accuracy is pretty crap out of the box, but I am working on that as we speak! I don't think you will get much more information on the SLR, its not a popular gun and made in limited numbers. I reckon it would be pretty good with a barrel and hop upgrade though. As for other bullpups. If you want something that would need to be a real world DMR (Or something plausible at least). I would go with either the SOC SLR or the SVU. The SVU is a little limited because of the 4th gear, but you can upgrade everything with Real Sword SVD parts. Combat Union make a tip top Hop unit replacement as well. My SVU has been fully upgraded and its pretty snazzy to use! If you are less worried about real world bullpup DMRs then you can take a look at any of the long style AUGS on Gunfire, they are easy to work on, fairly good parts availability and would work well as a DMR. OR look at the APS UAR, which is essentially like the SOC-AR, an M4 inside. If you want something futuristic looking that has great parts compatibility but not necessarily a bullpup. Look at the JG SL8/SL9. Essentially its all G36 inside so can take any number of parts. Thats the problem I don't like the look of the UAR and if I was going AUG it would be the short I would want. The SOC was one I was interested in, but as its nearly as heavy as the Krytac LMG that I sold after 1 day of using it due to the weight I don't think I'm going to be able to find one I think that's looking a bit of airsoft porn and that I can upgrade as I go along. I'm glad you managed to get your 97s sorted though, as I remember you saying you wasn't sure it was going to turn up at one point Link to comment Share on other sites More sharing options...
PopRocket123 Posted January 16, 2020 Share Posted January 16, 2020 5 hours ago, TommoThomson said: Thats the problem I don't like the look of the UAR and if I was going AUG it would be the short I would want. The SOC was one I was interested in, but as its nearly as heavy as the Krytac LMG that I sold after 1 day of using it due to the weight I don't think I'm going to be able to find one I think that's looking a bit of airsoft porn and that I can upgrade as I go along. I'm glad you managed to get your 97s sorted though, as I remember you saying you wasn't sure it was going to turn up at one point What about more of a custom job? I'm working on a SCAR H DMR project and internally it's a good base for a DMR. externally it has a lot of potential to be customised out bullpupped Link to comment Share on other sites More sharing options...
TommoThomson Posted January 19, 2020 Author Share Posted January 19, 2020 On 16/01/2020 at 12:20, PopRocket123 said: What about more of a custom job? I'm working on a SCAR H DMR project and internally it's a good base for a DMR. externally it has a lot of potential to be customised out bullpupped That sounds good, but I'm not the sort who does things if Rifs as the last one I took apart it didn't end well 😂 Link to comment Share on other sites More sharing options...
PopRocket123 Posted January 19, 2020 Share Posted January 19, 2020 1 hour ago, TommoThomson said: That sounds good, but I'm not the sort who does things if Rifs as the last one I took apart it didn't end well 😂 Trouble is if you want a good DMR it's going to have to come apart. I could probably design a 3D printed bullpup kit for a SCAR H AEG but it'd take a while and I've not got a whole lot of time at the moment Link to comment Share on other sites More sharing options...
Skara Posted January 20, 2020 Share Posted January 20, 2020 6 hours ago, TommoThomson said: That sounds good, but I'm not the sort who does things if Rifs as the last one I took apart it didn't end well 😂 Then HPA is the way to go. Link to comment Share on other sites More sharing options...
TommoThomson Posted January 20, 2020 Author Share Posted January 20, 2020 9 hours ago, PopRocket123 said: Trouble is if you want a good DMR it's going to have to come apart. I could probably design a 3D printed bullpup kit for a SCAR H AEG but it'd take a while and I've not got a whole lot of time at the moment This is why I'm looking at other options, as their are a lot of awesome Rifs out there that need new homes.....its just some people aren't the best at understanding unless you are willing to post something the buyer isn't likely to drive hundreds of miles to pick it up 😂 Link to comment Share on other sites More sharing options...
PopRocket123 Posted January 20, 2020 Share Posted January 20, 2020 5 hours ago, TommoThomson said: This is why I'm looking at other options, as their are a lot of awesome Rifs out there that need new homes.....its just some people aren't the best at understanding unless you are willing to post something the buyer isn't likely to drive hundreds of miles to pick it up 😂 This is very true. Funnily enough I am starting to fall out of love with the SCAR so I may just finish the project and flip it if you're interested Link to comment Share on other sites More sharing options...
Wo1f Posted January 23, 2020 Share Posted January 23, 2020 Ignore the heathens.. HPA is evil. Buy an MWS, add a longer barrel and a nice bucking then convert it to semi. Job done. Link to comment Share on other sites More sharing options...
Skara Posted January 23, 2020 Share Posted January 23, 2020 2 hours ago, Wo1f said: Buy an MWS ...and HPA tap it Link to comment Share on other sites More sharing options...
Wo1f Posted January 23, 2020 Share Posted January 23, 2020 5 minutes ago, Skara said: ...and HPA tap it I’d rather drag my balls across a mile of broken glass than HPA tap my rifle. Link to comment Share on other sites More sharing options...
PureSilver Posted January 23, 2020 Share Posted January 23, 2020 On 19/01/2020 at 19:11, TommoThomson said: I'm not the sort who does things if Rifs as the last one I took apart it didn't end well 😂 You don’t have any choice, really. There’s nothing out there performs like people expect a DMR to out of the box. If you want a DMR, you have to do the tuning that the factory didn’t have the time or money to do for you. Even if you buy used you’ll have to learn how to do preventative maintenance and repairs - if you want to get the last 10% of performance, you’ll have to be prepared to put in about another 50% of the work. The cheapest, lowest-maintenance and simplest way to do this is to get a mechanical remote-line gas drop-in conversion, like a Mancraft PDiK. That means no messing around with AEG gearboxes, which will be the worst bit of this whole process. If you don’t want to do that, the only thing we can really recommend is good guns to build into a DMR. High-volume guns that might be suitable include Real Sword’s SVD, and its vastly less expensive CYMA clone and ASP bullpup equivalent. Whatever it is you pick, you want good parts support and you want it to be easy to work on. Link to comment Share on other sites More sharing options...
sonofsammo Posted January 23, 2020 Share Posted January 23, 2020 7 hours ago, Wo1f said: I’d rather drag my balls across a mile of broken glass than HPA tap my rifle. But it's soooooooo much fun! An MWS DMR with a 350 round mag? That's a whole lot of fuck yeah right there! (thank you @rocketdogbert for your ingenious awesomeness!). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.