Jump to content

Tracer unit, what bb's


El aston
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi its me again haha. But i am a noob and and just need some help :) its the only way we learn right?

 

Well i want a tracer unit and i have found this one 

https://www.amazon.co.uk/Acetech-Airsoft-AT1000-Tactical-Tracer/dp/B01HHN8EZA?ie=UTF8&*Version*=1&*entries*=0

 

What BB's will be best to run though this with my tm recoil ?

  On 20/01/2019 at 14:08, El aston said:

Hi its me again haha. But i am a noob and and just need some help :) its the only way we learn right?

 

Well i want a tracer unit and i have found this one 

https://www.amazon.co.uk/Acetech-Airsoft-AT1000-Tactical-Tracer/dp/B01HHN8EZA?ie=UTF8&*Version*=1&*entries*=0

 

What BB's will be best to run though this with my tm recoil ? also what weight?

Expand  

 

Link to comment
Share on other sites

Used ASG Blasters 0.25 for a few years, never let me down once, have recently started using Geoffs (Red) as well & again no issues at all.

 

Ran these through both the TM 416D Delta & Devgru, either way you'll be safe with either brand.

Link to comment
Share on other sites

  On 20/01/2019 at 19:23, El aston said:

Does it matter if the bullets are .2 or .25?

Does it make a difference if they are 0.20 or 0.25?

Expand  

Depends what youre using them for. 

I use 0.20 inside as theres no wind to carry the BB off and theyre much cheaper. I also mix the same weight tracer BB with regular BBs so not every single shot glows, thats what i prefer. But 0.25 (or heavier) outside as a heavier BB will go through leaves etc and be less likely be be carried by the wind. Dont mix weights as you wont know what youre chronoing.

Obviously the heavier the BB the lower your FPS will be (FPS isnt everything). 

Link to comment
Share on other sites

  On 20/01/2019 at 19:34, Polluxtroy69 said:

Depends what youre using them for. 

I use 0.20 inside as theres no wind to carry the BB off and theyre much cheaper. I also mix the same weight tracer BB with regular BBs so not every single shot glows, thats what i prefer. But 0.25 (or heavier) outside as a heavier BB will go through leaves etc and be less likely be be carried by the wind. Dont mix weights as you wont know what youre chronoing.

Obviously the heavier the BB the lower your FPS will be (FPS isnt everything). 

Expand  

Brilliant mate, this makes sense and good idea about mixing them :) thank you

Link to comment
Share on other sites

  On 20/01/2019 at 17:04, MikeMarden said:

Used ASG Blasters 0.25 for a few years, never let me down once, have recently started using Geoffs (Red) as well & again no issues at all.

 

Ran these through both the TM 416D Delta & Devgru, either way you'll be safe with either brand.

Expand  

 

How do you find the reds? Are they nice and bright like the greens?

Link to comment
Share on other sites

As Jcheeseright stated, a tad dimmer than the greens but still highly visible, and yes they look the bollocks through NV!

Link to comment
Share on other sites

  • Supporters

If you're running mid caps, consider loading some BBs of a different colour, or non-tracer BBs, in first. They'll come out last and let you know when the mag is nearly empty.

Link to comment
Share on other sites

  • 3 weeks later...
Guest StrategyBish

Longbow have just released their own tracer rounds. currently with 0.25 and 0.3 on offer looking to bring out more weights when they can.

Link to comment
Share on other sites

  On 08/02/2019 at 18:02, emilianoksa said:

In the advert It says  " Supports only green tracer BBs"

 

Don't buy red.

Expand  

 

Honestly I say 'bollocks' to this.

Red BB's are the same as green BB's in all but colour. The UV light from the tracer unit will do the same job on a red tracer BB as a green. Just a light absorbing component.

 

They likely say only to use green because they produce the best effect.

Link to comment
Share on other sites

  On 14/02/2019 at 07:56, clumpyedge said:

 

Im not 100% what tests they were put through on the test thread but could probably send some over to whoever did it for them to check.

Expand  

 

They were tested for size, roundness, polish, shatter etc

 

It was @gasman conducting the tests.

Link to comment
Share on other sites

  • Supporters
  On 13/02/2019 at 23:51, Seven said:

 

Honestly I say 'bollocks' to this.

Red BB's are the same as green BB's in all but colour. The UV light from the tracer unit will do the same job on a red tracer BB as a green. Just a light absorbing component.

 

They likely say only to use green because they produce the best effect.

Expand  

Nope its true it is to do with light frequencies. The newer xcortech and acetech use a purple high intensity UV led and the reds do charge off it properly.

Link to comment
Share on other sites

  On 13/02/2019 at 23:51, Seven said:

 

Honestly I say 'bollocks' to this.

Red BB's are the same as green BB's in all but colour. The UV light from the tracer unit will do the same job on a red tracer BB as a green. Just a light absorbing component.

 

They likely say only to use green because they produce the best effect.

Expand  

 

No, depending on the tracer unit sometimes red tracers hardly glow at all.

 

 

Oops, didnt see Trigs response above!!

Link to comment
Share on other sites

  On 14/02/2019 at 10:55, Albiscuit said:

 

No, depending on the tracer unit sometimes red tracers hardly glow at all.

 

 

Oops, didnt see Trigs response above!!

Expand  

 

  On 14/02/2019 at 10:46, ImTriggerHappy said:

Nope its true it is to do with light frequencies. The newer xcortech and acetech use a purple high intensity UV led and the reds do charge off it properly.

Expand  

 

Are you sure it's not just a by product of the colour?

Even the new acetech units state (from the manufacturer) that they are only compatible with green but I've literally seen them used and there are multiple independent (user) reviews that state they work just fine including earlier in this very thread. They are not quite as bright as green, hence I queried how bright they got earlier in the thread, but still.

My main point was regarding the use of huge bold black lettering saying DONT USE RED like it would cause harm to the tracer unit. Which it obviously won't.

Link to comment
Share on other sites

Oh, yeah its just red will not show up properly..

 

I had to buy red tracers last time as it was all the shop had, used the whole bottle eventually, they were shite at glowing but caused no issue at all with the tracer. Still works a charm.

 

Link to comment
Share on other sites

  On 14/02/2019 at 11:22, Albiscuit said:

Oh, yeah its just red will not show up properly..

 

I had to buy red tracers last time as it was all the shop had, used the whole bottle eventually, they were shite at glowing but caused no issue at all with the tracer. Still works a charm.

 

Expand  

 

Well my new tracer unit should be here in a couple of hours and I intend to try out using reds as my low ammo warning so I'll let you know how I get on.

It's the acetech 'lighter' (not the S).

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...