Jump to content

Recommended Posts

after speaking to a friend ive decided to go with the sr-16 SPR gun as i can in future upgrade it to a DMR but for now i am going to use it as a normal aeg and use it under the 350fps limit at my local site. im going to get a 455mm 6.02 tight bore barrel and a new spring that will hopefully take it up to around 348fps with the tight bore barrel fitted. im also getting a vari-zoom scope which my friend recommended me as well. the scope has 3-9x zoom. here's my cart on patrol base if anyone is interested.

image.thumb.png.87898886917435bf37589417581f102e.png

before anyone gets worried i have safety goggles already that i use in the workshop at Rolls Royce they are bolle poly carbonate ones so they should be ok, an they fit really close to my face so there is a small chance BBs will get over the top or under them.

Share this post


Link to post
Share on other sites
24 minutes ago, LuKe33!! said:

before anyone gets worried i have safety goggles already that i use in the workshop at Rolls Royce they are bolle poly carbonate ones so they should be ok, an they fit really close to my face so there is a small chance BBs will get over the top or under them.

It's not about BBs going through from the top or bottom, it's about BBs smashing through the "glass" or breaking the frame!

 

Bolle glasses are usually fine but check your site if they allow "unrated" eyepro..

Share this post


Link to post
Share on other sites

Barrel too long for accuracy 330mm good for 100M

 

@Skara I think even the most basic Bolle stuff covers impact from debris way beyond the energy  airsoft is capable of

Share this post


Link to post
Share on other sites

Might be, but better safe than sorry, God only gave us 2 eyes and, unlike kidneys, we need both of them and technology can't replace then yet :)

 

as for the AEG specs, a full v2 cylinder probably won't have enough air volume to cope with a 450mm inner barrel..

stick to a 300/363mm barrel with a full cylinder and use that sweet joule creep to push heavy BBs..

3-9x optics imo are overkill for the distances airsoft has. 4x is more than enough for 90% of the engagements.. I'd get a nice 4x or 6x tops, the most important thing is that the lens absorbs as much light as possible and the vision is crystal clear.. Have a look at short dots, they look cool and work as both close and long range sights!

Share this post


Link to post
Share on other sites

Since it's your first aeg, get a red dot instead. You will be outgunned because you won't be able to line them up in your sights by the time they already shot you. Speaking from experience here.

The guys are right here with the barrel length. Doesn't add accuracy even if installed correctly and if you don't adjust the cylinder volume to it, it will actually decrease both fps and accuracy.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×