AlphaBear Posted December 20, 2020 Share Posted December 20, 2020 Hi @Davegolfdo you mean re-greasing this part (below) or any other parts too? Link to comment Share on other sites More sharing options...
Davegolf Posted December 20, 2020 Share Posted December 20, 2020 Yes that part 👍 Link to comment Share on other sites More sharing options...
AlphaBear Posted December 20, 2020 Share Posted December 20, 2020 @Davegolfthis lube Dave? RMDavis 1 Link to comment Share on other sites More sharing options...
Davegolf Posted December 20, 2020 Share Posted December 20, 2020 Yep, love that stuff. And this for everything else metal on metal... RMDavis 1 Link to comment Share on other sites More sharing options...
jsmithski Posted December 20, 2020 Share Posted December 20, 2020 11 hours ago, Wild Weasel said: if I remember rightly this was on the forum a few months back, basically take a grub screw and drill and screw through the centre of your rocket valve. wind it in and out to adjust FPS. If it helps to find it I replied, so look through my page as it were to find my reply, to find the post. There’s a guide on y2b, easy to find: DIY NPAS Link to comment Share on other sites More sharing options...
Sinistersnipe Posted December 20, 2020 Share Posted December 20, 2020 9 hours ago, Davegolf said: Yep, love that stuff. And this for everything else metal on metal... FYI - i’ve had bad experience with Würth Dry Chain Lube hardening into wax below around 10 degrees, rendering my gun useless. YMMV, but I had better luck with simple silicone spray everywhere Link to comment Share on other sites More sharing options...
Davegolf Posted December 21, 2020 Share Posted December 21, 2020 Yes, application should only be minimal. just looking for a thin film / dusting. Link to comment Share on other sites More sharing options...
Captain Darling Posted December 21, 2020 Share Posted December 21, 2020 On 17/12/2020 at 19:45, Davegolf said: @Captain Darling runs off to make a URGI MWS 😂 I have 3 already! 9.3” in black, and also DDC - I couldn’t make my mind up. I’m currently fettling a DDC 14.5” on a DMR build MWS. I just love the look and feel of this skinny rail. All HAO, I really rate their workmanship. RMDavis 1 Link to comment Share on other sites More sharing options...
demandt Posted December 21, 2020 Share Posted December 21, 2020 @RMDavis That's one hell of a build. The Cerakote was a good choice, that colour scheme looks awesome. Could you provide a full parts list? I'm curious... RMDavis 1 Link to comment Share on other sites More sharing options...
RMDavis Posted December 21, 2020 Share Posted December 21, 2020 1 hour ago, demandt said: @RMDavis That's one hell of a build. The Cerakote was a good choice, that colour scheme looks awesome. Could you provide a full parts list? I'm curious... Thanks bud, I'm really pleased with how it's turned out! Here's the current build list... TM MWS CQBR - Base HAO Industries Geissele 9.3" MK16/URGI Rail HAO Industries Geissele REBCG BCG Z-Parts Geissele URGI-1 Airborne Charging Handle Z-Parts Daniel Defence 10.3" Outer Barrel Magpul K2 Pistol Grip Magpul ASAP QD Rear Sling Plate Magpul M-Lok Hand Stop Magpul Magazine Pulls Magpul MOE SL-K Stock Clone Magpul Rail Cover Clone Unity Tactical Fast Micro Mount Vortex Optics Crossfire Wadsn DBAL-A2 Clone Wadsn Dual Pressure Pad Wadsn Surefire Clone M300B Weapon Light Arisaka Clone M-Lok Weapon Light Mount Wiitech Trigger Guard G&P Aluminium Buffer Ergo Gapper Angry Gun 4 Prong Surefire Flash Hider Angry Gun Surefire Suppressor Angry Gun Geissele Maritime Bolt Catch Ferro Concepts Slingster - Multicam Black Ferro Concepts QD Sling Swivels TacbeltsUK Suppressor cover - Multicam Black SixG Brass Hop Nub demandt 1 Link to comment Share on other sites More sharing options...
RMDavis Posted December 21, 2020 Share Posted December 21, 2020 3 hours ago, Captain Darling said: I have 3 already! 9.3” in black, and also DDC - I couldn’t make my mind up. I’m currently fettling a DDC 14.5” on a DMR build MWS. I just love the look and feel of this skinny rail. All HAO, I really rate their workmanship. Totally understand why you've got 3! I've been thinking about building a 14.5" for my next MWS I agree its one of the nicest rails out there, and anything else seems far too bulky. Although the allure of a 14.5" 416D build using one of HAO's conversion kits is very strong! 😳 Link to comment Share on other sites More sharing options...
Davegolf Posted December 22, 2020 Share Posted December 22, 2020 Yes, wish TM would put out a gas 416, an AK105, SiG MPX 9mm and remake the MP7 full size!! RMDavis 1 Link to comment Share on other sites More sharing options...
DerDer Posted December 22, 2020 Share Posted December 22, 2020 39 minutes ago, Davegolf said: Yes, wish TM would put out a gas 416, an AK105, SiG MPX 9mm and remake the MP7 full size!! A decent UZI has to eventually materialize. Link to comment Share on other sites More sharing options...
AlphaBear Posted December 22, 2020 Share Posted December 22, 2020 Marius primary market is Japan ergo the demand for products is determined by what the local airsoft community wants. The desire to be ‘like’ US special forces or US anything as a matter of fact determines Marui’s product line predominantly. The AK MWS was an interesting release though one which I think many of us did not see coming. The fact that we have not seen anything more of it believes me to think it’s not been popular. It’s likely that a 416 variant will be on the cards as that makes economic sense as no doubt it will sell in numbers. However the current economic climate may just scupper any plans. Also the supply of anything Marui is becoming scarce to say the least. I’m not sure how long that will last though.... Do we have any Japanese speaking members here? If so ask them to get onto some Japanese forums and see what the lay of the land is like. That will possibly give some insight into what to expect here in the West Link to comment Share on other sites More sharing options...
Hypokondrikern Posted December 22, 2020 Share Posted December 22, 2020 On the horizon: ... And. Another PMAG that works! https://shop.jkarmy.com/g-p-g-mag-long-ver-for-marui-tm-mws-gbbr-system-black-magazine-p-mag-style.html Looking forward to see your URGIs with this 40 rnd arm rest! Link to comment Share on other sites More sharing options...
Captain Darling Posted December 22, 2020 Share Posted December 22, 2020 Wow, that’s quite the slong. I’m not sure how I feel about that. Reminds me of that sweet period in the 80’s of using Bren mags on the SLR - not massively practical or necessarily effective. Link to comment Share on other sites More sharing options...
Mullvad Posted December 23, 2020 Share Posted December 23, 2020 Hello everyone. Jumping in to this forum since I am thinking of buying a MWS very soon now after christmas for some local IPSC airsoft shooting and general training. I right now have a VFC 416D that I very much enjoy but I think I would ''need'' the MWS also. All airsofters know the feeling, I am sure. My question is, is there any M-LOK rail that is as close to drop in on the MWS system as possible? I have M-LOK rail on the 416 any I think it is so nice to have. preferably from a EU website, but of course not a must. It doesnt have to look anything special, just M-LOK and about 9.5'' long is what I am looking for. And as little special work for it as possible. It is the CQBR version I am thinking of buying. Thanks and merry christmas to all of you. Link to comment Share on other sites More sharing options...
Davegolf Posted December 23, 2020 Share Posted December 23, 2020 @Mullvad welcome, this is what you are looking for; https://www.highpressureairsoft.co.uk/store/p696/Geissele_Super_Modular_Rail_MK4_M-LOK.html Can never have enough gnus! Link to comment Share on other sites More sharing options...
JamesWills Posted December 23, 2020 Share Posted December 23, 2020 Not sure if this has been asked before but I cant find it in the search, whats the best bucking to use with the SixG brass nub? currently using a Maple leaf MR 50 degree (Blue) and the range really isnt as good as I thought it would be. I am using 0.28 BB's currently Link to comment Share on other sites More sharing options...
Mullvad Posted December 23, 2020 Share Posted December 23, 2020 6 hours ago, Davegolf said: @Mullvad welcome, this is what you are looking for; https://www.highpressureairsoft.co.uk/store/p696/Geissele_Super_Modular_Rail_MK4_M-LOK.html Can never have enough gnus! Thank you! Will be on the look out for when the black version is back in stock again. Hopefully soon. Thanks for the link, have a good one! Link to comment Share on other sites More sharing options...
Davegolf Posted December 23, 2020 Share Posted December 23, 2020 @JamesWills what FPS are you running and what range are you getting? Actual measured distance. Link to comment Share on other sites More sharing options...
Whereismyhammer Posted December 23, 2020 Share Posted December 23, 2020 Reporting back on the full auto jamming issue. (sorry I don’t know how to link back to past comments) installed the g&p nozzle. It’s really good but hasn’t solved the full auto jamming issue completely it just happens less often. mag feed lips are not damaged. I’m a bit stumped really. thanks for your help so far folks. Link to comment Share on other sites More sharing options...
Davegolf Posted December 23, 2020 Share Posted December 23, 2020 @Whereismyhammer have you put the gun back to stock and checked the fault is gone? Then add modifications one at a time. Link to comment Share on other sites More sharing options...
Whereismyhammer Posted December 23, 2020 Share Posted December 23, 2020 Yeah, I did that originally. That’s what is so confusing about it. it is all stock apart from the g&p nozzle. I only put that in because the stock one was damaged and is out of stock everywhere. Link to comment Share on other sites More sharing options...
Davegolf Posted December 23, 2020 Share Posted December 23, 2020 So it’s fine with the TM nozzle? Standard TM bolt or is that G&P too? Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now