Cipher-032 Posted January 4, 2019 Share Posted January 4, 2019 time to work some hop up stuff! Wo1f and Bolton.Zippy 2 Link to comment Share on other sites More sharing options...
Cipher-032 Posted January 4, 2019 Share Posted January 4, 2019 Ohhhh yeah! Can’t wait to try this! Hopefully it will be more consistent and lift .28’s like a piece of cake! Wo1f 1 Link to comment Share on other sites More sharing options...
Wo1f Posted January 4, 2019 Author Share Posted January 4, 2019 What’s your setup? Looks like it would lift a .40👍 Link to comment Share on other sites More sharing options...
Cipher-032 Posted January 4, 2019 Share Posted January 4, 2019 24 minutes ago, Wo1f said: What’s your setup? Looks like it would lift a .40👍 TNT TR 50 degree, 300mm Crazy jet, Element H plastic nub. Similar to your brass one. All spares I had about. The SRS nub wouldnt fit with out modification to the nub or chamber. I couldnt be bothered with that. I lost about 20FPS but I had the hop dialled on slightly. Maybe the MWS doesnt suffer much compression. The TNT rubber has a thin wedge on the side. So Im praying it stays seated and straight. Link to comment Share on other sites More sharing options...
Wo1f Posted January 5, 2019 Author Share Posted January 5, 2019 I noticed the little nub on the TNT T bucking. The modify tan is the same too. Personally I’d rather it be like that than too big like the Maple leaf. My MWS mk12 mod 0... gave the prs stock to the VFC SR-25 and went old school on the MWS... MWS CASV lingering at the bottom. Cipher-032, GothicGhost and Dentonboy 2 1 Link to comment Share on other sites More sharing options...
Cipher-032 Posted January 5, 2019 Share Posted January 5, 2019 @Wo1f Your Mk12 is gorgeous! I ordered 2 P mags from Milspec last week. Knowning Dad would be home I was sure they would be there for me after work. As usual life gave me lemons, he was dog walking, and they had to be signed for. Looks like If I run the MWS tomorrow its down to 2 Mags on that, and 5 on the HK45. Pistol as a primary any one? Be interesting to see if it works in the cold. Ive got some Nuprol 3 in case Link to comment Share on other sites More sharing options...
Wo1f Posted January 5, 2019 Author Share Posted January 5, 2019 Thanks! best of luck with the P mags. Most people don’t seem to get on with them. Never tried them myself though. Link to comment Share on other sites More sharing options...
Guest Posted January 5, 2019 Share Posted January 5, 2019 I’ve used PMAGS, seemed to work fine for me, but my peak fps dropped off with them by about 20 Link to comment Share on other sites More sharing options...
Cipher-032 Posted January 5, 2019 Share Posted January 5, 2019 1 hour ago, rocketdogbert said: I’ve used PMAGS, seemed to work fine for me, but my peak fps dropped off with them by about 20 Hmmm. Once I get hold of them next weekend ill have to a chrono check with them then. Link to comment Share on other sites More sharing options...
Guest Posted January 5, 2019 Share Posted January 5, 2019 I’ve used PMAGS, seemed to work fine for me, but my peak fps dropped off with them by about 20 Link to comment Share on other sites More sharing options...
Guest Posted January 5, 2019 Share Posted January 5, 2019 The misses went out, so I did a bit of colour detailing on the MTR to match the ‘scope Link to comment Share on other sites More sharing options...
Wo1f Posted January 6, 2019 Author Share Posted January 6, 2019 That’s really nice @rocketdogbert. Is your AFG mounted at a 45 degree angle? Link to comment Share on other sites More sharing options...
Supporters Gepard Posted January 6, 2019 Supporters Share Posted January 6, 2019 3 minutes ago, Wo1f said: That’s really nice @rocketdogbert. Is your AFG mounted at a 45 degree angle? Noticed that too! What's the reason RDB? Link to comment Share on other sites More sharing options...
Guest Posted January 6, 2019 Share Posted January 6, 2019 59 minutes ago, Wo1f said: That’s really nice @rocketdogbert. Is your AFG mounted at a 45 degree angle? 55 minutes ago, Gepard said: Noticed that too! What's the reason RDB? Yes. I have a gas pedal mounted the same on the left as well. It was the only way I could get them really comfy. Link to comment Share on other sites More sharing options...
Cipher-032 Posted January 6, 2019 Share Posted January 6, 2019 Excuse my crummy post skirmish picture. But wow! My G&G M4 crapped itself, jammed the gearbox twice I a row. I think the Mosfet has gone bad. so I had to use the MWS, two mags for short skirmish games. Ran it on red and the performance was at perfect. The TNT hop has to be tweaked a little bit as it bedded in but the range and accuracy was brilliant for GBBR. And only have two mags made you really think before you shot. Cracking gun ❤️ Wo1f and Bolton.Zippy 2 Link to comment Share on other sites More sharing options...
Jacket Posted January 9, 2019 Share Posted January 9, 2019 Has anyone removed the rail and barrel from an MTR? Link to comment Share on other sites More sharing options...
Guest Posted January 9, 2019 Share Posted January 9, 2019 30 minutes ago, Jacket said: Has anyone removed the rail and barrel from an MTR? Yup. It’s a real b’stard. The Gas block is screwed on with thread locked screws, AND glued to the barrel. The rail mount is threadlocked to the barrel mount, and the barrel mount is thread locked to the upper receiver. The barrel mount has an unusual two lug locator, I had to drift it off with a punch. I had to drift off the gas block with a punch as well Good Luck ! Link to comment Share on other sites More sharing options...
Guest Posted January 10, 2019 Share Posted January 10, 2019 Here’s a tip. The AW Mag is nowhere near a fit for the MWS. I didn’t expect it to be, I bought it to modify for my vector, but just letting you know, it definitely isn’t. I may modify it for the MWS though 😈 Link to comment Share on other sites More sharing options...
Wo1f Posted January 10, 2019 Author Share Posted January 10, 2019 3 hours ago, rocketdogbert said: Here’s a tip. The AW Mag is nowhere near a fit for the MWS. I didn’t expect it to be, I bought it to modify for my vector, but just letting you know, it definitely isn’t. I may modify it for the MWS though 😈 The drum mag? I was hoping I could mod a short mag to the top of one Link to comment Share on other sites More sharing options...
Guest Posted January 10, 2019 Share Posted January 10, 2019 2 minutes ago, Wo1f said: The drum mag? I was hoping I could mod a short mag to the top of one I can take and send a load of pictures if you like. Essentially, the adapter needs some fairly serious modification to fit the top of an MWS mag into it, and to fit the adapter into the MWS magwell. There doesn’t appear to be an easy way to bolt the short MWS mag to the AW Drum Link to comment Share on other sites More sharing options...
Supporters Shizbazki Posted January 11, 2019 Supporters Share Posted January 11, 2019 Arrgh I should stop looking at this thread, really want a TM MWS RIF now despite already owning a GHK M4 Mod1 which i really love too. Wo1f 1 Link to comment Share on other sites More sharing options...
Wo1f Posted January 11, 2019 Author Share Posted January 11, 2019 Do it! Link to comment Share on other sites More sharing options...
xB0SHx Posted January 11, 2019 Share Posted January 11, 2019 Hey guys new here. I have a type 89 not the m4 but I'm pretty sure they're the same internals. Very little info or help with mods on the 89. Great advice so far and gonna invest in the nub and and modify bucking but not a barrel as it was shooting 345- 348 fps last weekend on nuprol green. For those of you struggling with loading your mags I've found a loader which arrived today. I was sceptical at first but wow they go in like butter. Only loaded 3 mags so not sure on how long it'll last but will use it on a skirmish day and see how it holds up. It's called a hurricane storm loader by warmag and I got it off a place in Italy. So if I understand with changing the nub and bucking at 345 fps on 0.2, I should be able to hop 0.36's and get like 70m range? On 10/01/2019 at 16:45, rocketdogbert said: Here’s a tip. The AW Mag is nowhere near a fit for the MWS. I didn’t expect it to be, I bought it to modify for my vector, but just letting you know, it definitely isn’t. I may modify it for the MWS though 😈 Hang on this drum mag you're saying won't fit the mws? Link to comment Share on other sites More sharing options...
Guest Posted January 11, 2019 Share Posted January 11, 2019 19 minutes ago, xB0SHx said: Hey guys new here. I have a type 89 not the m4 but I'm pretty sure they're the same internals. Very little info or help with mods on the 89. Great advice so far and gonna invest in the nub and and modify bucking but not a barrel as it was shooting 345- 348 fps last weekend on nuprol green. For those of you struggling with loading your mags I've found a loader which arrived today. I was sceptical at first but wow they go in like butter. Only loaded 3 mags so not sure on how long it'll last but will use it on a skirmish day and see how it holds up. It's called a hurricane storm loader by warmag and I got it off a place in Italy. So if I understand with changing the nub and bucking at 345 fps on 0.2, I should be able to hop 0.36's and get like 70m range? Hang on this drum mag you're saying won't fit the mws? Nope, not even nearly. Link to comment Share on other sites More sharing options...
xB0SHx Posted January 11, 2019 Share Posted January 11, 2019 1 minute ago, rocketdogbert said: Nope, not even nearly. Gutted. Was going to order one tomorrow. Is there another alternative? Or even a mid cap? Struggling with the 30 rounds mag at 42 quid a pop Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now