Jump to content

xB0SHx

Members
  • Content Count

    24
  • Joined

  • Last visited

  • Feedback

    N/A

About xB0SHx

  • Rank
    AF-UK Newbie

Profile Information

  • Guns
    Nuprol delta pioneer ,Tokyo marui type 89, Kwc 1911
  • Sites
    Skirmish Exeter, MMA

Recent Profile Visitors

105 profile views
  1. xB0SHx

    THE TM MWS thread

    I've had one for a bit. Skirmished 2 or 3 days with it and coming from hi caps I reload a lot. Its held out so far and it's night and day vs the plunger style
  2. xB0SHx

    THE TM MWS thread

    It's slightly different. Didn't think about it needing to be a harder material. Because of it making it thicker with the key it pulls down towards the back of the barrel so I might need to make it into a T instead of an I
  3. xB0SHx

    THE TM MWS thread

    I'll give it a go. Was fine with slightly warmer weather. Need to play with the hopup unit as it was curving left badly again. I suspect the I key shifted positions. The one sided tension arm isn't the best design. Can't find an aftermarket hop unit for it either
  4. xB0SHx

    THE TM MWS thread

    Haha it's looking like the way forward 🤣 at least I can sell some mags after to recoup some of the money this guns swallowing. Do you reckon running 3.0 will solve my issue for the moment?
  5. xB0SHx

    THE TM MWS thread

    Tried running nuprol 2.0 today and gun wouldn't cycle because it kept freezing up, rookie didn't take any other gas with me. Has anyone hpa tapped the mags and how? Asking because the plate at the bottom that holds the spring has a small hole where the fill valve is and don't know if it'll need modifying
  6. xB0SHx

    THE TM MWS thread

    I use the mws warmag from softair website. Pretty pricey but has worked so much better than the normal speed loaders. Fitted the I key and tnt bucking to the type 89 today. With some bending, filing and a touch of super glue it's shooting about 65 metres on .32s consistently. Its the furthest I can test it so we'll see how it tests next weekend. Thanks for the suggestion
  7. xB0SHx

    THE TM MWS thread

    If you were to supply it all and just send finished product what would you be looking at charging?
  8. xB0SHx

    THE TM MWS thread

    I'm also curious about this because let's be honest it's gonna happen anyway so why delay the inevitable He's not the best at keeping you updated but I ordered a couple weeks ago and it came within a couple days.
  9. xB0SHx

    THE TM MWS thread

    I'm unsure. I do know that the we one definitely isn't right. The teeth are too thick. I filed mine down slightly and it worked
  10. xB0SHx

    THE TM MWS thread

    Me! Me! I'll have to get on that street corner for a bit first though.
  11. xB0SHx

    THE TM MWS thread

    Going to order the maple leaf as well just so I can compare the two. There's so many choices, decepticon, autobot, super, monster. Which one should I get and what degree? 60?
  12. xB0SHx

    THE TM MWS thread

    Perfect. I'll get them ordered up cheers
  13. xB0SHx

    THE TM MWS thread

    Ok so these? Does the I key fit under the tensioner? Because you turn the dials on the side and it's pulls that arm down. Its easily over hopping .32s
  14. xB0SHx

    THE TM MWS thread

    So if anyone who has type 89 the super nub doesn't fit as it has no nub 🙄 Is there a solution to this? I'll try it with the tan bucking as the gun is already in bits and see if this will improve at all
  15. xB0SHx

    THE TM MWS thread

    That is impressive. Pure mag envy
×
×
  • Create New...